Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Concrete Maintenance- Options for the asphalt Coating in Alabaster, Alabama


Concrete Maintenance installed in an unstable surface could quickly lead to difficulties. There are three Chief options for the Simple setup:

  1. Paving Over Existing Driveway: If your existing driveway is in good shape rather than revealing severe cracks or crumbling, hot asphalt mixture can be laid directly over your driveway. 1 facet is elevation: make sure fences, garage flooring, and other structures are not compromised by the higher level of this surface.
  2. Remove old driveway, counter into the floor: The present driveway is completely eliminated (or you might not have a driveway yet) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Eliminate the old driveway and fasten it into a solid surface. This is the preferred method. An aggregated stone floor partly replaces part of this hot asphalt mixture.

Our Services:

The best time to install Concrete Maintenance in Alabaster

The more asphalt you operate, the more leeway you might have. By way of instance, in 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. Generally, for thin asphalt applications (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you'll need to speak to your contractor. The hot mix remains functional in this period, however, the time is limited.

How much can an Concrete Maintenance price in Alabaster?

Consider the weather vagaries of our climate when choosing the quality of asphalt. The substantial temperature variations that we experience cause appreciable damage to asphalt perform.

In addition, it will be good to tell the contractor if you have a recreational vehicle or even a van. He might need to adapt the asphalt mix so as to be more immune to the weight of heavy vehicles.

The Benefits of Concrete Maintenance

  • Smooth end;
  • non invasive
  • Simple to Keep
  • watertightness guaranteed
  • withstands the rigors of this Quebec climate very well (provided it has been set up optimally);
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt employed along with the paving contractor.

To get a sustainable Concrete Maintenance

The existence of an asphalt paver can be around 20 years, when the best conditions are met. We're talking about a professional paving builder, a good grade of asphalt and an optimal asphalt laying technique.


The longevity of residential asphalt paving chiefly is dependent on the quality of the laying. Indeed, the significant causes of deformation or ripping of an asphalt layer are the lack of compaction and a thin foundation. However, the upkeep of the asphalt pavement is also a deciding factor in its longevity. That's to say, you'll need to seal your drive once in 10 decades, at a minimum, so as to keep its great condition.


We suggest that you inform your asphalting contractor if you decide to have your driveway asphalt so as to sell your property. It may not be necessary to pay top dollar for placing asphalt , in such a case.

Concrete Maintenance laying: price and contract

The choice of the asphalt laying contractor is essential. In order to not have unpleasant surprises, then you'll need to choose it carefully.

Make sure the paving contractor has liability insurance coverage. A trip to the web site of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has ever become the subject of complaints.

The following details must be included in the contract:

- date of beginning and finish of the job;

- proof of insurance;

- technical particulars;

- RBQ accreditation number.

You ought to be aware that a Concrete Maintenance builder can't require you to make a deposit before work has started. However, you need to agree to the payment terms and be sure it is about the contract.

A solid foundation for Concrete Maintenance- Alabaster

Prior to estimating the Concrete Maintenance driveway to your new residence by a builder, or acquiring some basic knowledge is imperative to guarantee that the job is well done. Know first that the lack of compaction and the inadequate depth of the foundation are the two main sources for the deformation or tearing of a layer of asphalt. When it's a new driveway, then it has to first be excavated to make room for a coating of crushed stone of adequate thickness. A geotextile membrane will be set under the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you have a new house, it is ideal to wait for 6 to 12 months before paving your driveway, to allow the soil to settle . In the case of a fix of this entrance, an easy replacement of the Concrete Maintenance layer can be considered in the event the contractor considers that the present base is adequate. In both scenarios, foundation redone or foundation preserved, the whole period of its warranty must be exactly the same.

Concrete Maintenance Alabaster Alabama

The weather conditions in our lovely state can have a disastrous impact on an asphalt driveway, hence the importance of including a slope with a minimum slope of 2%. This will enable water to drain into the road and decrease the danger of heaving or cracking. This significant detail must be taken into consideration when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the builder prior to the start of the work: he will have the ability to provide materials so. Some asphalt mixtures produce an asphalt which is more resistant to heavy duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to reach a thickness of at least 5 cm (2 in) after being compacted. For optimum stability, the base should extend over the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also note that the installation of unwanted supports around the base is a good method to prevent possible cracks and this Concrete Maintenance done in chilly weather is going to be of inferior quality. It's therefore far better to wait for the bright days to return before starting work.

A definite contract with your contractor in Alabaster

To avoid unpleasant surprises, then choose your contractor diligently and be sure that the name and address of his company are written about the contract. The beginning and end dates of the job, as well as proof of the contractor's liability insurance and also the technical details of the job to be carried out, should also be included. No contractor should require a deposit before work starts. To avoid the inconvenience that might lead to unforeseen expenses, take a look at the Concrete MaintenanceAlabaster site. You may thus have all the tools in hand to successfully complete your Concrete Maintenance project.

Concrete Maintenance Alabaster - Greatest Alabama in Alabama!

For quality asphalting work , phone on Concrete Maintenance, Alabaster professional team. Consult our Business department to find out the regions served.

Parking Lot Repair And Striping Alabaster | Snow Removal Alabaster
Home >> alabama/alabaster >> concrete maintenance
Share this...