Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Alternatives for the asphalt Coating in Albertville, Alabama


Asphalt installed in an unstable surface can quickly lead to problems. There are 3 main options for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not showing serious cracks or crumbling, hot asphalt mix can be laid directly over your driveway. One facet is elevation: make sure fences, garage flooring, and other constructions aren't jeopardized by the greater degree of this new surface.
  2. Remove old driveway, peg to the floor: The existing driveway is totally eliminated (or you might not have a driveway yet) and 4 to 6 inches of warm paving stone is put directly on the ground.
  3. Eliminate the old driveway and secure it into a solid surface. This is actually the preferred method. An aggregated stone floor partially replaces part of the hot asphalt mix. Typically 6 to 8 inches of limestone extends under 3 inches of asphalt.

The longer asphalt you operate, the more leeway you have. For instance, in 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. Generally, for thin asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, then you'll need to speak to your contractor. The hot mix is ​​still functional during this period of time, but the time is limited.

How much does an Asphalt price in Albertville?

Take into account the weather vagaries of our climate when choosing the standard of asphalt. The significant temperature variations we experience cause appreciable damage to asphalt perform.

In addition, it'll be useful to tell the contractor if you have a recreational vehicle or even a van. He might have to accommodate the asphalt mix so as to be more immune to the weight of heavy vehicles.

The advantages of Asphalt

  • Smooth end;
  • non invasive
  • easy to Keep
  • watertightness guaranteed
  • withstands the rigors of the Quebec climate very well (provided it has been installed );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price varies depending on the quality of the asphalt employed and the paving contractor.

To get a sustainable Asphalt

The existence of an asphalt paver can be up to 20 decades, when the best conditions are satisfied. We're referring to a professional paving contractor, a great grade of asphalt as well as an optimal asphalt laying technique.


The durability of residential asphalt paving chiefly depends on the standard of the laying. Really, the significant causes of deformation or ripping of an asphalt coating are the lack of compaction plus a thin foundation. However, the maintenance of the asphalt sidewalk is also a determining factor in its own longevity. That is to say, you will need to seal your driveway once in 10 years, at a minimum, so as to keep its great state.


We advise you to inform your asphalting builder in case you choose to get your driveway asphalt so as to offer your property. It may not be essential to pay top dollar for laying asphalt , in this circumstance.

Asphalt laying: price and contract

The choice of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, you'll have to select it carefully.

Our ensures and Asphalt work

Make sure the paving contractor has liability insurance coverage. A visit to the web site of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has been the subject of complaints.

The following details must be included in the arrangement:

- date of beginning and finish of the work;

- proof of insurance;

- technical details;

- RBQ accreditation number.

You ought to know that a paving contractor cannot demand you to make a deposit before work has started. But you should agree to the payment provisions and make sure it's on the contract.

A strong base for Asphalt- Albertville

Before redoing the asphalt drive to your new residence by a contractor, or obtaining some basic knowledge is imperative to guarantee that the job is done. Know first that the lack of compaction and the insufficient thickness of the foundation are the two chief causes of the deformation or ripping of a coating of asphalt. If it's a new driveway, then it must initially be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane will be set under the granular backfill if the soil turns out to be very loamy (clayey). If you have a new house, it is ideal to wait 6 to 12 months before paving your drive, to enable the soil to settle . In the case of a fix of this entry, an easy replacement of the asphalt layer can be considered in the event the contractor believes that the existing base is adequate. In both cases, base redone or foundation preserved, the whole period of its guarantee has to be the same.

Asphalt Albertville Alabama

The weather conditions in our lovely state can have a devastating effect in an asphalt drive, thus the importance of including a slope with a minimum slope of 2%. This will enable water to drain to the road and minimize the risk of heaving or cracking. This important detail has to be taken into account when excavating and maintained during backfilling.

In case you've got a van or recreational vehicle, notify the builder before the onset of the job: he is going to be able to supply materials accordingly. Some asphalt combinations produce an asphalt which is more resistant to heavy duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to reach a thickness of at least 5 cm (2 ) after being compacted. For optimal stability, the base should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also mention that the setup of unwanted supports around the foundation is a good way to prevent potential cracks and that asphalting done in chilly weather will be of inferior quality. It is therefore far better to await the bright days to go back before starting work.

A definite contract with your contractor in Albertville

To avoid unpleasant surprises, then choose your contractor diligently and be sure that the name and address of his business are written about the contract. The start and end dates of this work, in addition to evidence of this contractor's liability insurance and also the technical specifics of the job to be carried out, should also be included. No contractor should require a deposit before work begins. To prevent the inconvenience that might lead to unforeseen expenses, take a look at the AsphaltAlbertville site. You will thus have all the resources in hand to successfully complete your asphalt paving project.

Asphalt Albertville - Best Alabama at Alabama!

For quality asphalting perform , call on Asphalt, Albertville professional team. We've got over 20 years of experience in asphalt laying, resurfacing, maintenance and repair. Consult our Company section to figure out the regions served.

Tar And Chip Paving Albertville | Parking Lot Repair And Striping Albertville
Home >> alabama/albertville >> asphalt
Share this...