Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Alternatives for the asphalt Coating in Alexander City, Alabama


Asphalt installed on an unstable surface can quickly lead to difficulties. There are three Chief options for the basic installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition rather than showing serious cracks or crumbling, hot asphalt mix can be laid directly over your driveway. One facet is elevation: make certain fences, garage flooring, and other structures are not jeopardized by the higher degree of the new surface.
  2. Remove old driveway, peg to the ground: The present driveway is completely eliminated (or you may not have a driveway yet) and 4 to 6 inches of warm paving stone is put directly on the ground.
  3. Eliminate the old driveway and fasten it into a good surface. This is the preferred method. An aggregated stone flooring partially replaces part of the hot asphalt mix.

The more asphalt you work, the more leeway you might have. By way of instance, at 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. Generally, for thin asphalt applications (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to consult with your contractor. The hot mix remains practical during this period of time, but the time is limited.

How much can an Asphalt cost in Alexander City?

Take into account the weather vagaries of our climate when choosing the quality of asphalt. The substantial temperature variations we experience cause considerable damage to asphalt perform.

Furthermore, it'll be useful to tell the contractor should you own a recreational vehicle or even a van. He will need to adapt the asphalt mixture in order to be more immune to the weight of heavy vehicles.

The advantages of Asphalt

  • Smooth end;
  • non invasive
  • easy to maintain
  • watertightness ensured
  • withstands the rigors of the Quebec climate very well (provided it's been set up optimally);
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost fluctuates based on the characteristic of the asphalt employed and the paving contractor.

To get a sustainable Asphalt

The life of an asphalt paver can be around 20 years, when the best states are satisfied. We're talking about a professional paving builder, a great quality of asphalt as well as an optimal asphalt laying technique.

Asphalt in Alexander City: cost, quality of work and lifespan


The longevity of residential asphalt paving chiefly is dependent on the quality of the placing. Indeed, the significant causes of deformation or ripping of an asphalt coating are the lack of compaction and a lean base. However, the upkeep of the asphalt pavement can be a determining factor in its longevity. That is to say, you will need to seal your drive once in ten years, at a minimum, so as to maintain its good state.


We suggest that you inform your asphalting contractor in case you choose to have your driveway asphalt in order to offer your property. It might not be essential to pay top dollar for laying asphalt , in this case.

Asphalt laying: cost and contract

The choice of the asphalt laying builder is indispensable. In order not to have unpleasant surprises, then you'll have to select it carefully.

Make sure the paving contractor has liability insurance coverage. A trip to the website of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has ever become the subject of complaints.

The following details should be included in the contract:

- date of start and end of the job;

- proof of insurance;

- technical details;

- RBQ certification number.

You ought to know that a paving builder can't demand you to make a down payment before work has started. But you should agree on the payment provisions and be sure it's about the contract.

A strong base for Asphalt- Alexander City

Prior to estimating the asphalt driveway to your new residence by a builder, or acquiring some basic knowledge is imperative to guarantee that the job is well done. Know first that the absence of compaction and the inadequate thickness of the base are the two chief sources for the deformation or tearing of a layer of asphalt. If it's a new driveway, it has to first be excavated to make room for a coating of crushed stone of sufficient thickness. A geotextile membrane is going to be placed beneath the granular backfill if the soil proves to be very loamy (clayey). If you have a new house, it is ideal to wait 6 to 12 months before paving your driveway, to enable the dirt to settle . In the event of a fix of this entrance, a simple replacement of the asphalt coating can be considered if the contractor believes that the present base is sufficient. In both scenarios, foundation redone or base maintained, the duration of its warranty must be the same.

Asphalt Alexander City Alabama

The weather conditions in our beautiful province may have a devastating effect in an asphalt drive, hence the significance of adding a slope with a minimum slope of 2%. This will allow water to drain to the road and decrease the danger of heaving or cracking. This important detail has to be taken into consideration when excavating and maintained during backfilling.

If you have a van or recreational vehicle, notify the builder before the onset of the work: he is going to have the ability to supply materials accordingly. Some asphalt mixtures produce an asphalt which is more immune to heavy-duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) so as to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the foundation should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also note that the setup of side supports around the base is a fantastic method to prevent possible cracks and this asphalting done in cold weather is going to be of inferior quality. It's therefore far better to wait for the sunny days to return before beginning work.

To avoid unpleasant surprises, then select your contractor and make certain the title and address of the business are written about the contract. The beginning and finish dates of this job, as well as proof of this contractor's liability insurance and also the technical specifics of the job to be carried out, should also be included. No contractor should require a deposit before work starts. To avoid the inconvenience that could cause unforeseen costs, visit the AsphaltAlexander City site. You will thus have all the resources in hand to successfully complete your asphalt paving project.

Asphalt Alexander City - Greatest Alabama at Alabama!

For quality asphalting work , phone on Asphalt, Alexander City professional team. Consult our Business section to figure out the regions served.

Tar And Chip Paving Alexander City | Parking Lot Repair And Striping Alexander City
Home >> alabama/alexander city >> asphalt
Share this...