Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt Coating in Anniston, Alabama


Asphalt installed on an unstable surface can quickly lead to problems. There are three Chief options for the Simple installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition and not revealing serious cracks or crumbling, hot asphalt mixture can be laid directly over your driveway. One facet is elevation: make sure fences, garage floors, and other structures are not compromised by the greater level of this surface.
  2. Remove old driveway, counter into the ground: The existing driveway is totally eliminated (or you may not have a driveway yet) and 4 to 6 inches of warm paving stone is placed directly on the ground.
  3. Eliminate the old driveway and fasten it into a good surface. This is the preferred method. An aggregated stone flooring partially replaces part of this hot asphalt mix.

The longer asphalt you work, the more leeway you might have. For example, at 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also raises: 46 minutes. Generally, for lean asphalt applications (about 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you'll need to speak to your contractor. The hot mix remains practical in this period of time, however, the time is limited.

How much can an Asphalt cost in Anniston?

Take into account the weather vagaries of the climate when deciding upon the standard of asphalt. The significant temperature variations we experience cause appreciable damage to asphalt perform.

In addition, it will be good to tell the contractor if you have a recreational vehicle or a van. He will need to accommodate the asphalt mixture so as to be more immune to the burden of heavy vehicles.

The Benefits of Asphalt

  • Smooth end;
  • non invasive
  • easy to maintain
  • watertightness guaranteed
  • withstands the rigors of this Quebec climate quite well (provided it's been set up optimally);
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt used along with the paving contractor.

To get a sustainable Asphalt

The existence of an asphalt paver may be up to 20 decades, when the best conditions are met. We are referring to a professional paving contractor, a great grade of asphalt and also an optimal asphalt laying technique.


The durability of residential asphalt paving chiefly depends on the quality of the laying. Really, the major causes of deformation or ripping of an asphalt coating are the lack of compaction plus a thin foundation. On the other hand, the maintenance of the asphalt pavement can be a determining factor in its own longevity. That's to say, you will need to seal your drive once in ten years, at a minimum, so as to maintain its great state.


We suggest that you inform your asphalting builder in case you choose to get your driveway asphalt so as to offer your property. It may not be necessary to pay top dollar for laying asphalt , in such a circumstance.

Asphalt laying: cost and contract

The option of the asphalt laying contractor is essential. In order not to have unpleasant surprises, you'll have to select it carefully.

Guarantee that the paving contractor has liability insurance. A trip to the website of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has ever been the subject of complaints.

These details must be included in the arrangement:

- date of start and finish of the work;

- proof of insurance;

- technical details;

- RBQ certification number.

You should know that a paving builder cannot demand that you make a deposit before work has started. However, you should agree to the payment terms and make sure it is about the contract.

Prior to estimating the asphalt driveway to your new home by a builder, or acquiring some basic knowledge is imperative to make sure the job is well done. Know first that the absence of compaction and the inadequate thickness of the foundation are the two main causes of the deformation or ripping of a layer of asphalt. If it's a new driveway, then it has to initially be excavated to make room for a layer of crushed stone of adequate depth. A geotextile membrane will be placed beneath the granular backfill if the soil turns out to be very loamy (clayey). If you have a new home, it is ideal to wait 6 to 12 months prior to paving your driveway, to allow the dirt to settle naturally. In the event of a repair of the entry, an easy replacement of the asphalt layer can be considered if the contractor considers that the existing base is sufficient. In both cases, foundation redone or base maintained, the whole period of its warranty must be exactly the same.

Asphalt Anniston Alabama

The weather conditions in our lovely state may have a disastrous impact on an asphalt drive, thus the significance of adding a slope having a minimum slope of 2%. This will allow water to drain to the street and minimize the risk of heaving or cracking. This important detail has to be taken into consideration when excavating and preserved during backfilling.

If you have a van or recreational vehicle, notify the builder prior to the start of the work: he will be able to supply materials accordingly. Some asphalt mixtures produce an asphalt that is more immune to heavy-duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to reach a thickness of 5 cm (2 in) after being compacted. For optimal stability, the base should extend over the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also mention that the installation of unwanted supports around the foundation is a good method to avoid potential cracks and this asphalting done in chilly weather is going to be of inferior quality. It's therefore far better to wait for the bright days to go back before starting work.

A definite contract with your builder in Anniston

To avoid unpleasant surprises, then choose your contractor diligently and be certain the title and address of the business are written on the contract. The start and end dates of this work, as well as evidence of this builder's liability insurance and the technical details of this job to be carried out, should also be included. No contractor should need a down payment before work begins. To avoid the inconvenience that could lead to unforeseen expenses, visit the AsphaltAnniston website. You may thus have all the resources in hand to successfully complete your asphalt paving project.

Asphalt Anniston - Greatest Alabama at Alabama!

For quality asphalting perform , phone on Asphalt, Anniston professional team. We've got more than twenty years of experience in asphalt laying, resurfacing, maintenance and repair. Consult our Company section to figure out the regions served.

Tar And Chip Paving Anniston | Parking Lot Repair And Striping Anniston
Home >> alabama/anniston >> asphalt
Share this...