Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt surface in Athens, Alabama


Tar And Chip Paving installed in an unstable surface can quickly lead to difficulties. There are 3 Chief options for the basic setup:

  1. Paving Over Existing Driveway: If your existing driveway is in good shape rather than showing serious fractures or crumbling, hot asphalt mix can be laid directly over your driveway. 1 facet is elevation: make certain fences, garage flooring, and other constructions aren't jeopardized by the higher level of this new surface.
  2. Eliminate old driveway, counter into the ground: The present driveway is totally eliminated (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed directly on the ground.
  3. Remove the old driveway and secure it to a solid surface. This is actually the preferred method. An aggregated stone flooring partly replaces part of this hot asphalt mix.

The longer asphalt you operate, the more leeway you might have. By way of instance, in 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. Generally, for thin asphalt programs (about 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you'll need to speak to your contractor. The hot mix remains functional in this period, however, the time is constrained.

How much can an Tar And Chip Paving cost in Athens?

Take into account the weather vagaries of the climate when deciding upon the standard of asphalt. The substantial temperature variations we experience cause considerable damage to asphalt work.

In addition, it will be useful to distinguish the contractor if you have a recreational vehicle or even a van. He might have to adapt the asphalt mixture so as to be more resistant to the burden of heavy vehicles.

The advantages of Tar And Chip Paving

  • Smooth finish;
  • non-slip
  • Simple to Keep
  • watertightness ensured
  • withstands the rigors of this Quebec climate very well (provided it's been set up );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt employed along with the paving contractor.

To get a sustainable Tar And Chip Paving

The existence of an asphalt paver may be around 20 decades, when the best conditions are met. We're talking about a professional paving builder, a good quality of asphalt and an optimal asphalt laying technique.

Tar And Chip Paving in Athens: price, quality of work and lifespan


The durability of residential asphalt paving chiefly is dependent upon the standard of the laying. Indeed, the significant causes of deformation or tearing of an asphalt coating are the lack of compaction and a lean base. On the other hand, the maintenance of the asphalt sidewalk is also a determining factor in its own longevity. That's to say, you'll have to seal your driveway once in ten decades, at a minimum, so as to keep its good state.


We suggest that you inform your asphalting builder if you choose to get your driveway asphalt in order to offer your property. It may not be necessary to pay top dollar for laying asphalt , in such a circumstance.

Tar And Chip Paving placing: cost and contract

The option of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, you will have to select it carefully.

Make sure the paving contractor has liability insurance coverage. A trip to the web site of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has been the subject of complaints.

The following details should be included in the contract:

- date of beginning and finish of the work;

- evidence of insurance;

- technical particulars;

- RBQ accreditation number.

You ought to be aware that a paving builder cannot require that you make a down payment before work has begun. However, you need to agree on the payment provisions and be sure it's on the contract.

A strong foundation for Tar And Chip Paving- Athens

Prior to estimating the asphalt drive to your new residence by a contractor, or obtaining some basic knowledge is imperative to guarantee that the job is well done. Know first that the absence of compaction and the insufficient thickness of the foundation are the two chief sources for the deformation or ripping of a coating of asphalt. When it's a new driveway, then it has to first be excavated to make room for a layer of crushed stone of sufficient thickness. A geotextile membrane is going to be placed beneath the granular backfill if the soil turns out to be very loamy (clayey). If you have a new home, it is ideal to wait for 6 to 12 months prior to paving your driveway, to enable the dirt to settle naturally. In the event of a fix of this entry, an easy replacement of the asphalt layer can be considered in the event the contractor considers that the existing foundation is adequate. In both cases, base redone or base preserved, the duration of its warranty must be the same.

Tar And Chip Paving Athens Alabama

The weather conditions in our beautiful province can have a disastrous impact in an asphalt drive, hence the importance of including a slope having a minimum slope of 2%. This will allow water to drain into the street and decrease the danger of heaving or cracking. This significant detail must be taken into account when excavating and preserved during backfilling.

In case you have a van or recreational vehicle, notify the contractor prior to the start of the work: he will be able to supply materials so. Some asphalt combinations produce an asphalt that is more resistant to heavy-duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to reach a thickness of at least 5 cm (2 ) after being compacted. For optimal stability, the foundation should extend over the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also mention that the setup of side supports around the base is a fantastic way to prevent possible cracks and that asphalting done in chilly weather is going to be of inferior quality. It's therefore far better to wait for the bright days to return before beginning work.

A Tar And Chip Paving contract with your contractor in Athens

To avoid unpleasant surprises, then choose your contractor diligently and make certain that the name and address of his business are written on the contract. The start and end dates of this work, in addition to proof of this builder's liability insurance and also the technical specifics of the job to be completed, should also be included. No contractor should require a deposit before work starts. To prevent the inconvenience that might cause unforeseen costs, visit the Tar And Chip PavingAthens website. You will thus have all the resources in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Athens - Best Alabama at Alabama!

For quality asphalting work , phone on Tar And Chip Paving, Athens professional team. Confirm our Company department to figure out the regions served.

Snow Removal Athens | Asphalt Athens
Home >> alabama/athens >> tar and chip paving
Share this...