Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt Coating in Atmore, Alabama


Asphalt installed on an unstable surface can quickly lead to difficulties. There are three main choices for the Simple setup:

  1. Paving Over Existing Driveway: If your current driveway is in good condition and not showing serious cracks or crumbling, hot asphalt mix can be laid directly over your driveway. One facet is elevation: make sure fences, garage floors, and other constructions are not compromised by the greater degree of the surface.
  2. Eliminate old driveway, counter into the floor: The existing driveway is totally eliminated (or you might not have a driveway nonetheless ) and 4 to 6 inches of warm paving stone is placed right on the ground.
  3. Eliminate the old driveway and fasten it into a good surface. This is the preferred method. An aggregated stone flooring partially replaces part of this hot asphalt mixture.

Our Services:

The best time to install Asphalt from Atmore

The longer asphalt you work, the more leeway you might have. By way of example, at 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. In general, for thin asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you'll need to speak to your contractor. The hot mix remains functional during this period of time, however, the time is limited.

How much can an Asphalt price in Atmore?

Consider the weather vagaries of our climate when choosing the quality of asphalt. The significant temperature variations that we experience cause appreciable damage to asphalt work.

Furthermore, it'll be useful to distinguish the contractor if you own a recreational vehicle or a van. He will need to adapt the asphalt mixture so as to be more immune to the weight of heavy vehicles.

The advantages of Asphalt

  • Smooth finish;
  • non invasive
  • easy to maintain
  • watertightness guaranteed
  • withstands the rigors of this Quebec climate very well (provided it has been set up optimally);
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt employed along with the paving contractor.

For a sustainable Asphalt

The life of an asphalt paver may be around 20 decades, when the very best states are met. We are talking about a professional paving builder, a great quality of asphalt and also an optimal asphalt laying technique.

Asphalt in Atmore: cost, quality of work and lifespan


The durability of residential asphalt paving largely is dependent on the standard of the placing. Really, the major causes of deformation or tearing of an asphalt coating are the absence of compaction plus a lean base. However, the maintenance of the asphalt sidewalk is also a deciding factor in its longevity. That's to say, you'll need to seal your driveway once in 10 years, at a minimum, so as to keep its great state.


We suggest that you inform your asphalting contractor if you decide to have your driveway asphalt so as to offer your property. It may not be necessary to pay top dollar for placing asphalt , in this case.

Asphalt placing: cost and contract

The option of the asphalt laying builder is essential. In order not to have unpleasant surprises, then you'll need to select it carefully.

Guarantee that the paving contractor has liability insurance coverage. A trip to the website of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has ever been the subject of complaints.

The following details must be included in the arrangement:

- date of start and finish of the job;

- proof of insurance;

- technical details;

- RBQ accreditation number.

You should know that a paving contractor can't demand that you make a deposit before work has started. But you should agree on the payment terms and be sure it's about the contract.

A solid base for Asphalt- Atmore

Prior to estimating the asphalt driveway to your new home by a contractor, or acquiring some fundamental knowledge is vital to guarantee that the job is well done. Know first that the absence of compaction and the insufficient thickness of the base are the two main sources for the deformation or ripping of a layer of asphalt. When it is a new driveway, then it has to initially be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane will be set beneath the granular backfill if the soil turns out to be very loamy (clayey). If you have a new house, it's best to wait for 6 to 12 months before paving your drive, to allow the soil to settle . In the case of a fix of the entry, a simple replacement of the asphalt coating can be considered in the event the contractor believes that the existing base is adequate. In both cases, base redone or foundation preserved, the whole period of its guarantee must be the same.

Asphalt Atmore Alabama

The weather conditions in our lovely state can have a devastating effect on an asphalt driveway, hence the significance of including a slope having a minimum slope of 2%. This will allow water to drain to the street and minimize the risk of heaving or cracking. This important detail has to be taken into consideration when excavating and maintained during backfilling.

In case you've got a van or recreational vehicle, notify the contractor prior to the start of the work: he is going to be able to supply materials accordingly. Some asphalt combinations produce an asphalt that is more immune to heavy duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to accomplish a thickness of 5 cm (2 in) after being compacted. For optimum stability, the base should extend over the surface to be paved by about thirty centimeters (a couple inches) on each side. Also note that the setup of side supports around the foundation is a fantastic method to prevent potential cracks and that asphalting done in cold weather will be of inferior quality. It is therefore better to await the sunny days to return before beginning work.

To avoid unpleasant surprises, then select your contractor diligently and be certain the name and address of his company are composed on the contract. The start and finish dates of this job, as well as evidence of the builder's liability insurance and the technical details of the job to be carried out, should also be included. No contractor should need a deposit before work starts. To prevent the inconvenience that might cause unforeseen costs, visit the AsphaltAtmore website. You may thus have the tools in hand to successfully complete your asphalt paving project.

Asphalt Atmore - Best Alabama at Alabama!

For quality asphalting work , call on Asphalt, Atmore specialist team. We have over 20 years of experience in asphalt laying, resurfacing, maintenance and repair. Confirm our Company section to figure out the regions served.

Tar And Chip Paving Atmore | Parking Lot Repair And Striping Atmore
Home >> alabama/atmore >> asphalt
Share this...