Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Alternatives for the asphalt surface in Auburn, Alabama


Asphalt installed in an unstable surface can quickly lead to problems. There are 3 Chief options for the basic installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition rather than showing severe fractures or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 aspect is height: make sure fences, garage flooring, and other constructions are not compromised by the higher degree of the new surface.
  2. Remove old driveway, peg to the ground: The existing driveway is totally eliminated (or you may not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed right on the ground.
  3. Eliminate the old driveway and fasten it to a good surface. This is actually the preferred method. An aggregated stone flooring partially replaces part of this hot asphalt mix. Generally 6 to 8 inches of aggregate goes under 3 inches of asphalt.

Our Services:

The best time to install Asphalt in Auburn

The more asphalt you operate, the more leeway you might have. By way of instance, at 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. Generally, for thin asphalt programs (approximately 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you'll need to consult with your contractor. The hot mix remains functional during this period, however, the time is constrained.

How much can an Asphalt cost in Auburn?

Consider the weather vagaries of our climate when deciding upon the quality of asphalt. The substantial temperature variations that we experience cause considerable damage to asphalt perform.

In addition, it'll be good to distinguish the contractor if you have a recreational vehicle or even a van. He will need to accommodate the asphalt mixture so as to be more immune to the burden of heavy vehicles.

The advantages of Asphalt

A driveway paved with asphalt has several benefits:

It'll cost you between $ 3 and $11 per square foot; the price varies depending on the quality of the asphalt used and the paving contractor.

To get a sustainable Asphalt

The life of an asphalt paver may be around 20 decades, when the best conditions are satisfied. We are talking about a professional paving builder, a great quality of asphalt as well as an optimal asphalt laying technique.


The durability of residential asphalt paving largely depends upon the standard of the placing. Indeed, the major causes of deformation or tearing of an asphalt layer are the absence of compaction plus a thin foundation. However, the upkeep of the asphalt pavement is also a deciding factor in its longevity. That is to say, you will need to seal your drive once in 10 years, at a minimum, in order to maintain its great condition.


We advise you to inform your asphalting contractor in case you decide to have your driveway asphalt in order to sell your property. It may not be essential to pay top dollar for placing asphalt , in such a case.

Asphalt laying: price and contract

The choice of the asphalt laying builder is essential. In order to not have unpleasant surprises, then you will have to select it carefully.

Make sure the paving contractor has liability insurance. A trip to the website of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has ever become the subject of complaints.

The following details must be included in the arrangement:

- date of beginning and finish of the work;

- proof of insurance;

- technical details;

- RBQ accreditation number.

You should know that a paving contractor cannot demand that you make a down payment before work has begun. However, you need to agree on the payment terms and make sure it is on the contract.

Prior to estimating the asphalt driveway to your new residence by a contractor, or acquiring some fundamental knowledge is imperative to guarantee that the job is done. Know first that the absence of compaction and the insufficient thickness of the foundation are the two main sources for the deformation or ripping of a layer of asphalt. If it's a new driveway, then it must first be excavated to make room for a layer of crushed stone of sufficient depth. A geotextile membrane is going to be set beneath the granular backfill if the dirt proves to be somewhat loamy (clayey). If you own a new home, it is best to wait 6 to 12 months before paving your driveway, to allow the soil to settle . In the case of a repair of the entry, an easy replacement of the asphalt coating can be considered if the contractor believes that the existing foundation is sufficient. In both cases, base redone or foundation maintained, the whole period of its warranty has to be exactly the same.

Asphalt Auburn Alabama

The weather conditions in our lovely state can have a devastating effect in an asphalt drive, thus the importance of adding a slope having a minimum slope of 2%. This will enable water to drain to the road and minimize the danger of heaving or cracking. This significant detail must be taken into consideration when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the builder before the onset of the job: he is going to have the ability to provide materials accordingly. Some asphalt mixtures produce an asphalt which is more immune to heavy-duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the foundation should extend over the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also note that the installation of side supports around the foundation is a good method to avoid possible cracks and that asphalting done in chilly weather is going to be of poor quality. It's therefore far better to wait for the sunny days to return before starting work.

To avoid unpleasant surprises, then select your contractor diligently and make certain that the title and address of the business are written on the contract. The start and finish dates of the job, as well as evidence of the contractor's liability insurance and also the technical details of this project to be carried out, should also be included. No contractor should need a down payment before work starts. To prevent the inconvenience that might cause unforeseen expenses, take a look at the AsphaltAuburn website. You may thus have all the resources in hand to successfully finish your asphalt paving project.

Asphalt Auburn - Best Alabama in Alabama!

For quality asphalting perform , call on Asphalt, Auburn specialist team. Confirm our Company department to find out the regions served.

Tar And Chip Paving Auburn | Parking Lot Repair And Striping Auburn
Home >> alabama/auburn >> asphalt
Share this...