Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt surface in Birmingham, Alabama


Asphalt installed on an unstable surface could quickly lead to problems. There are 3 Chief choices for the basic setup:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not showing serious cracks or crumbling, hot asphalt mix can be placed directly within your driveway. One facet is height: make certain fences, garage floors, and other constructions are not compromised by the greater degree of this new surface.
  2. Remove old driveway, counter into the floor: The present driveway is completely removed (or you may not have a driveway yet) and 4 to 6 inches of hot paving stone is placed right on the ground.
  3. Remove the old driveway and fasten it to a good surface. This is actually the preferred method. An aggregated stone flooring partially replaces part of the hot asphalt mixture.

The more asphalt you operate, the more leeway you might have. By way of instance, at 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. In general, for lean asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you ought to speak to your contractor. The hot mix is ​​still practical in this period of time, however, the time is constrained.

How much can an Asphalt cost in Birmingham?

Consider the weather vagaries of the climate when choosing the standard of asphalt. The significant temperature variations that we experience cause considerable damage to asphalt work.

Furthermore, it'll be useful to tell the contractor should you have a recreational vehicle or a van. He will have to accommodate the asphalt mix so as to be more immune to the weight of heavy vehicles.

The Benefits of Asphalt

  • Smooth end;
  • non-slip
  • easy to maintain
  • watertightness ensured
  • withstands the rigors of this Quebec climate quite well (provided it has been installed );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt employed along with the paving contractor.

For a sustainable Asphalt

The existence of an asphalt paver may be up to 20 decades, when the best states are satisfied. We are referring to a professional paving builder, a great grade of asphalt as well as also an optimal asphalt laying technique.


The longevity of residential asphalt paving chiefly is dependent upon the quality of the laying. Indeed, the significant causes of deformation or ripping of an asphalt coating are the absence of compaction and a lean base. On the other hand, the upkeep of the asphalt sidewalk is also a determining factor in its own longevity. That's to say, you will need to seal your drive once in 10 decades, at a minimum, in order to maintain its good condition.


We suggest that you inform your asphalting builder in case you choose to get your driveway asphalt in order to offer your property. It might not be necessary to pay top dollar for laying asphalt , in such a case.

Asphalt laying: price and contract

The option of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, then you will need to select it carefully.

Make sure the paving contractor has liability insurance. A visit to the web site of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has been the subject of complaints.

These details must be included in the arrangement:

- date of start and end of the work;

- evidence of insurance;

- technical particulars;

- RBQ certification number.

You ought to know that a paving contractor can't demand you to make a deposit before work has started. However, you need to agree to the payment terms and make sure it's on the contract.

Before redoing the asphalt driveway to your new residence by a builder, or obtaining some fundamental knowledge is vital to make sure the job is well done. Know first that the absence of compaction and the insufficient thickness of the foundation are the two chief sources for the deformation or tearing of a coating of asphalt. If it's a new driveway, it has to first be excavated to make room for a layer of crushed stone of sufficient depth. A geotextile membrane is going to be placed under the granular backfill if the dirt proves to be somewhat loamy (clayey). If you have a new home, it is best to wait for 6 to 12 months prior to paving your drive, to enable the dirt to settle . In the event of a fix of this entry, a simple replacement of the asphalt layer can be considered if the contractor considers that the existing foundation is adequate. In both scenarios, base redone or base maintained, the whole period of its guarantee has to be the same.

Asphalt Birmingham Alabama

The weather conditions in our beautiful province can have a devastating effect on an asphalt driveway, thus the importance of adding a slope having a minimum slope of 2%. This will enable water to drain to the street and decrease the danger of heaving or cracking. This significant detail must be taken into consideration when excavating and preserved during backfilling.

In case you have a van or recreational vehicle, notify the contractor before the start of the work: he will be able to provide materials accordingly. Some asphalt mixtures produce an asphalt that is more resistant to heavy-duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to reach a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the base should extend over the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also note that the installation of unwanted supports around the foundation is a good way to avoid possible cracks and that asphalting done in cold weather is going to be of poor quality. It is therefore better to wait for the bright days to return before beginning work.

A Asphalt contract with your contractor in Birmingham

To avoid unpleasant surprises, choose your contractor and be sure that the name and address of the business are composed on the contract. The start and end dates of this work, in addition to proof of this builder's liability insurance and the technical details of this project to be carried out, should also be included. No contractor should need a deposit before work begins. To avoid the inconvenience that might lead to unforeseen costs, visit the AsphaltBirmingham website. You will thus have the tools in hand to successfully finish your asphalt paving project.

Asphalt Birmingham - Greatest Alabama at Alabama!

For caliber asphalting perform , phone on Asphalt, Birmingham specialist team. Confirm our Company section to figure out the regions served.

Tar And Chip Paving Birmingham | Parking Lot Repair And Striping Birmingham
Home >> alabama/birmingham >> asphalt
Share this...