Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt surface in Center Point, Alabama


Asphalt installed on an unstable surface could quickly lead to difficulties. There are three main choices for the basic setup:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not showing serious cracks or crumbling, hot asphalt mixture can be laid directly over your driveway. One facet is elevation: make certain fences, garage flooring, and other structures aren't compromised by the higher level of this surface.
  2. Eliminate old driveway, counter into the floor: The existing driveway is totally eliminated (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Eliminate the old driveway and fasten it to a good surface. This is the preferred method. An aggregated stone flooring partly replaces part of the hot asphalt mixture.

The more asphalt you work, the more leeway you might have. By way of example, at 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also increases: 46 minutes. Generally, for lean asphalt programs (approximately 1.5 cm), you should wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you ought to speak to your contractor. The hot mix is ​​still functional during this period, however, the time is limited.

How much can an Asphalt cost in Center Point?

Consider the weather vagaries of our climate when choosing the standard of asphalt. The substantial temperature variations we experience cause appreciable damage to asphalt perform.

In addition, it'll be good to distinguish the contractor if you own a recreational vehicle or a van. He will need to adapt the asphalt mix so as to be more immune to the burden of heavy vehicles.

The advantages of Asphalt

  • Smooth end;
  • non-slip
  • easy to maintain
  • watertightness ensured
  • withstands the rigors of this Quebec climate very well (provided it has been installed );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt employed and the paving contractor.

To get a sustainable Asphalt

The existence of an asphalt paver may be around 20 decades, when the best conditions are met. We're referring to a professional paving contractor, a good quality of asphalt as well as also an optimal asphalt laying technique.


The durability of residential asphalt paving chiefly depends upon the quality of the placing. Really, the significant causes of deformation or ripping of an asphalt coating are the lack of compaction plus a lean base. On the other hand, the upkeep of the asphalt pavement is also a deciding factor in its longevity. That's to say, you will need to seal your drive once in ten years, at a minimum, in order to keep its great state.


We advise you to notify your asphalting contractor in case you choose to get your driveway asphalt so as to offer your property. It might not be necessary to pay top dollar for laying asphalt , in such a circumstance.

Asphalt laying: cost and contract

The choice of the asphalt laying builder is essential. In order to not have unpleasant surprises, you'll need to select it carefully.

Guarantee that the paving contractor has liability insurance coverage. A trip to the web site of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has ever been the subject of complaints.

The following details should be included in the contract:

- date of start and finish of the work;

- proof of insurance;

- technical particulars;

- RBQ certification number.

You should be aware that a paving builder can't demand that you make a down payment before work has started. However, you should agree to the payment terms and be sure it is about the contract.

Before redoing the asphalt drive to your new residence by a contractor, or acquiring some basic knowledge is vital to make sure the job is well done. Know first that the lack of compaction and the inadequate depth of the base are the two main causes of the deformation or ripping of a layer of asphalt. When it's a new driveway, then it has to first be excavated to make room for a layer of crushed stone of sufficient thickness. A geotextile membrane will be placed beneath the granular backfill if the dirt turns out to be very loamy (clayey). If you own a new house, it is best to wait 6 to 12 months before paving your drive, to enable the soil to settle . In the case of a repair of the entrance, an easy replacement of the asphalt layer can be considered in the event the contractor believes that the existing base is sufficient. In both scenarios, base redone or foundation preserved, the whole period of its guarantee must be the same.

Asphalt Center Point Alabama

The weather conditions in our lovely state can have a devastating effect in an asphalt drive, hence the significance of including a slope having a minimum slope of 2%. This will allow water to drain into the street and decrease the danger of heaving or cracking. This important detail has to be taken into consideration when excavating and preserved during backfilling.

In case you have a van or recreational vehicle, notify the contractor prior to the onset of the work: he will be able to supply materials so. Some asphalt mixtures produce an asphalt that is more immune to heavy duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to reach a thickness of 5 cm (2 ) after being compacted. For optimum stability, the base should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also mention that the installation of side supports around the foundation is a fantastic method to avoid possible cracks and that asphalting done in chilly weather will be of poor quality. It's therefore far better to await the bright days to go back before beginning work.

To avoid unpleasant surprises, then choose your contractor diligently and make sure that the title and address of the company are written about the contract. The beginning and finish dates of this job, in addition to proof of the builder's liability insurance and also the technical details of the project to be completed, should also be included. No contractor should need a down payment before work starts. To prevent the inconvenience that might cause unforeseen costs, visit the AsphaltCenter Point site. You will thus have all the tools in hand to successfully complete your asphalt paving project.

Asphalt Center Point - Best Alabama in Alabama!

For quality asphalting work , call on Asphalt, Center Point professional team. Consult our Company department to figure out the regions served.

Tar And Chip Paving Center Point | Parking Lot Repair And Striping Center Point
Home >> alabama/center point >> asphalt
Share this...