Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt Coating in Chelsea, Alabama


Tar And Chip Paving installed on an unstable surface can quickly lead to problems. There are 3 Chief options for the basic setup:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition and not showing severe cracks or crumbling, hot asphalt mix can be placed directly within your driveway. 1 aspect is height: make certain fences, garage flooring, and other structures are not jeopardized by the higher level of the new surface.
  2. Remove old driveway, peg to the floor: The existing driveway is completely removed (or you may not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is put right on the ground.
  3. Remove the old driveway and secure it to a solid surface. This is actually the preferred method. An aggregated stone flooring partially replaces part of the hot asphalt mixture.

The longer asphalt you operate, the more leeway you might have. For example, in 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. Generally, for lean asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you'll need to consult with your contractor. The hot mix is ​​still functional in this period, however, the time is constrained.

How much can an Tar And Chip Paving price in Chelsea?

Take into account the weather vagaries of our climate when deciding upon the standard of asphalt. The significant temperature variations that we experience cause appreciable damage to asphalt perform.

In addition, it will be good to tell the contractor if you have a recreational vehicle or a van. He will have to adapt the asphalt mix so as to be more resistant to the burden of heavy vehicles.

The advantages of Tar And Chip Paving

A driveway paved with asphalt has several advantages:

It'll cost you between $ 3 and $11 per square foot; the price fluctuates based on the quality of the asphalt used along with the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver can be up to 20 years, when the best conditions are met. We're talking about a professional paving contractor, a great quality of asphalt as well as an optimal asphalt laying technique.

Tar And Chip Paving in Chelsea: cost, quality of work and lifespan


The longevity of residential asphalt paving largely is dependent on the standard of the placing. Indeed, the major causes of deformation or ripping of an asphalt layer are the lack of compaction plus a thin foundation. On the other hand, the maintenance of the asphalt pavement is also a determining factor in its longevity. That is to say, you will have to seal your drive once in 10 years, at a minimum, so as to keep its great condition.


We advise you to inform your asphalting contractor in case you decide to have your driveway asphalt so as to offer your property. It may not be necessary to pay top dollar for placing asphalt , in this case.

Tar And Chip Paving laying: price and contract

The option of the asphalt laying contractor is essential. In order not to have unpleasant surprises, you'll have to choose it carefully.

Make sure the paving contractor has liability insurance. A visit to the web site of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has been the subject of complaints.

The following details must be included in the contract:

- date of start and end of the work;

- evidence of insurance;

- technical details;

- RBQ accreditation number.

You ought to know that a paving builder cannot require you to make a down payment before work has begun. However, you should agree to the payment provisions and make sure it is about the contract.

A solid foundation for Tar And Chip Paving- Chelsea

Prior to estimating the asphalt driveway to your new residence by a builder, or acquiring some fundamental knowledge is imperative to make sure the job is done. Know first that the absence of compaction and the inadequate thickness of the foundation are the two chief sources for the deformation or ripping of a layer of asphalt. When it's a new driveway, it has to initially be excavated to make room for a coating of crushed stone of adequate thickness. A geotextile membrane will be placed beneath the granular backfill if the soil proves to be somewhat loamy (clayey). If you own a new house, it's ideal to wait for 6 to 12 months before paving your driveway, to enable the soil to settle . In the event of a fix of the entry, a simple replacement of the asphalt coating can be considered in the event the contractor believes that the present foundation is adequate. In both cases, base redone or base maintained, the duration of its warranty has to be the same.

Tar And Chip Paving Chelsea Alabama

The weather conditions in our lovely state may have a disastrous impact in an asphalt drive, hence the significance of adding a slope having a minimum slope of 2%. This will allow water to drain to the road and decrease the danger of heaving or cracking. This significant detail has to be taken into account when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the contractor before the start of the job: he will be able to supply materials so. Some asphalt mixtures produce an asphalt which is more immune to heavy-duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the base should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also note that the setup of unwanted supports around the base is a fantastic way to avoid potential cracks and that asphalting done in chilly weather will be of inferior quality. It is therefore far better to wait for the sunny days to go back before beginning work.

A Tar And Chip Paving contract with your contractor in Chelsea

To avoid unpleasant surprises, select your contractor and make sure that the name and address of his company are composed about the contract. The beginning and finish dates of the work, as well as proof of the contractor's liability insurance and the technical specifics of this job to be carried out, should also be included. No contractor should need a down payment before work starts. To avoid the inconvenience that might cause unforeseen costs, take a look at the Tar And Chip PavingChelsea website. You may thus have the tools in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Chelsea - Greatest Alabama at Alabama!

For caliber asphalting perform , phone on Tar And Chip Paving, Chelsea specialist team. We've got more than twenty decades of expertise in asphalt laying, resurfacing, maintenance and repair. Consult our Company section to find out the regions served.

Snow Removal Chelsea | Asphalt Chelsea
Home >> alabama/chelsea >> tar and chip paving
Share this...