Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt surface in Cullman, Alabama


Asphalt installed in an unstable surface could quickly lead to difficulties. There are three Chief choices for the Simple setup:

  1. Paving Over Existing Driveway: If your current driveway is in good shape rather than showing severe cracks or crumbling, hot asphalt mix can be laid directly over your driveway. One facet is elevation: make sure fences, garage floors, and other structures are not jeopardized by the higher degree of the surface.
  2. Eliminate old driveway, peg to the ground: The present driveway is totally eliminated (or you may not have a driveway nonetheless ) and 4 to 6 inches of warm paving stone is put right on the ground.
  3. Remove the old driveway and fasten it to a solid surface. This is actually the preferred method. An aggregated stone flooring partly replaces part of this hot asphalt mixture. Generally 6 to 8 inches of limestone goes under 3 inches of asphalt.

Our Services:

The best time to install Asphalt in Cullman

The more asphalt you operate, the more leeway you might have. For example, at 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. In general, for lean asphalt programs (about 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to consult with your contractor. The hot mix remains functional in this period of time, however, the time is constrained.

How much can an Asphalt price in Cullman?

Take into account the weather vagaries of our climate when deciding upon the quality of asphalt. The significant temperature variations we experience cause considerable damage to asphalt work.

Furthermore, it will be good to tell the contractor should you own a recreational vehicle or even a van. He will have to accommodate the asphalt mix so as to be more immune to the burden of heavy vehicles.

The Benefits of Asphalt

A driveway paved with asphalt has several advantages:

It will cost you between $ 3 and $11 per square foot; the price varies depending on the quality of the asphalt used along with the paving contractor.

To get a sustainable Asphalt

The life of an asphalt paver can be around 20 years, when the best conditions are met. We are talking about a professional paving contractor, a good grade of asphalt as well as also an optimal asphalt laying technique.

Asphalt in Cullman: cost, quality of work and lifespan


The durability of residential asphalt paving largely depends upon the quality of the laying. Indeed, the major causes of deformation or tearing of an asphalt coating are the lack of compaction and a thin foundation. However, the upkeep of the asphalt sidewalk is also a determining factor in its own longevity. That's to say, you will need to seal your driveway once in 10 decades, at a minimum, so as to maintain its good condition.


We suggest that you notify your asphalting contractor in case you choose to have your driveway asphalt so as to offer your property. It might not be essential to pay top dollar for laying asphalt , in such a case.

Asphalt placing: cost and contract

The option of the asphalt laying contractor is indispensable. In order to not have unpleasant surprises, you will need to select it carefully.

Guarantee that the paving contractor has liability insurance. A visit to the web site of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has been the subject of complaints.

The following details must be included in the arrangement:

- date of beginning and end of the job;

- proof of insurance;

- technical particulars;

- RBQ certification number.

You should be aware that a paving contractor cannot require you to make a deposit before work has begun. However, you need to agree to the payment provisions and make sure it's about the contract.

A strong foundation for Asphalt- Cullman

Prior to estimating the asphalt driveway to your new residence by a builder, or acquiring some fundamental knowledge is imperative to guarantee that the job is well done. Know first that the absence of compaction and the inadequate depth of the foundation are the two main causes of the deformation or tearing of a coating of asphalt. If it is a new driveway, then it has to initially be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane is going to be placed under the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you own a new home, it is ideal to wait for 6 to 12 months prior to paving your drive, to enable the dirt to settle naturally. In the event of a repair of this entrance, a simple replacement of the asphalt layer can be considered in the event the contractor believes that the present base is sufficient. In both cases, foundation redone or base maintained, the whole period of its warranty must be exactly the same.

Asphalt Cullman Alabama

The weather conditions in our lovely state can have a devastating effect on an asphalt drive, hence the significance of including a slope with a minimum slope of 2%. This will allow water to drain into the street and minimize the danger of heaving or cracking. This important detail must be taken into consideration when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the builder before the start of the job: he will have the ability to provide materials so. Some asphalt combinations produce an asphalt which is more immune to heavy duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of 5 cm (2 ) after being compacted. For optimal stability, the base should extend across the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also note that the installation of unwanted supports around the foundation is a fantastic method to prevent potential cracks and that asphalting done in cold weather is going to be of inferior quality. It's therefore better to wait for the sunny days to go back before starting work.

To avoid unpleasant surprises, then select your contractor and be certain the name and address of the business are written on the contract. The beginning and end dates of the job, as well as evidence of the builder's liability insurance and also the technical details of the project to be completed, should also be included. No contractor should require a down payment before work starts. To avoid the inconvenience that could lead to unforeseen costs, visit the AsphaltCullman website. You may thus have the resources in hand to successfully finish your asphalt paving project.

Asphalt Cullman - Best Alabama at Alabama!

For quality asphalting work , phone on Asphalt, Cullman specialist team. We have more than 20 decades of expertise in asphalt laying, resurfacing, maintenance and repair. Confirm our Company department to find out the regions served.

Tar And Chip Paving Cullman | Parking Lot Repair And Striping Cullman
Home >> alabama/cullman >> asphalt
Share this...