Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Concrete Maintenance- Options for the asphalt surface in Cullman, Alabama


Concrete Maintenance installed on an unstable surface can quickly lead to difficulties. There are 3 main options for the Simple setup:

  1. Paving Over Existing Driveway: If your current driveway is in good condition rather than revealing severe cracks or crumbling, hot asphalt mix can be laid directly over your driveway. 1 facet is height: make sure fences, garage flooring, and other structures aren't jeopardized by the higher level of this surface.
  2. Remove old driveway, peg to the ground: The existing driveway is completely eliminated (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed directly on the ground.
  3. Eliminate the old driveway and fasten it to a solid surface. This is actually the preferred method. An aggregated stone floor partly replaces part of this hot asphalt mixture. Generally 6 to 8 inches of limestone goes under 3 inches of asphalt.

Our Services:

The best time to install Concrete Maintenance in Cullman

The more asphalt you work, the more leeway you have. By way of instance, in 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also raises: 46 minutes. Generally, for thin asphalt applications (about 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, then you ought to consult with your contractor. The hot mix is ​​still practical in this period of time, but the time is constrained.

How much can an Concrete Maintenance price in Cullman?

Consider the weather vagaries of our climate when choosing the standard of asphalt. The significant temperature variations that we experience cause considerable damage to asphalt perform.

Furthermore, it will be useful to tell the contractor if you have a recreational vehicle or even a van. He might need to accommodate the asphalt mix in order to be more immune to the weight of heavy vehicles.

The Benefits of Concrete Maintenance

A driveway paved with asphalt has several advantages:

It will cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt used and the paving contractor.

To get a sustainable Concrete Maintenance

The life of an asphalt paver can be up to 20 decades, when the very best conditions are satisfied. We're talking about a professional paving builder, a good quality of asphalt as well as also an optimal asphalt laying technique.


The longevity of residential asphalt paving largely is dependent on the quality of the placing. Really, the major causes of deformation or tearing of an asphalt layer are the lack of compaction plus a thin foundation. However, the upkeep of the asphalt sidewalk is also a deciding factor in its own longevity. That is to say, you will have to seal your driveway once in ten years, at a minimum, so as to maintain its good state.


We suggest that you inform your asphalting contractor if you decide to get your driveway asphalt in order to offer your property. It might not be essential to pay top dollar for laying asphalt , in this circumstance.

Concrete Maintenance placing: cost and contract

The option of the asphalt laying contractor is indispensable. In order to not have unpleasant surprises, you'll need to choose it carefully.

Our guarantees and Concrete Maintenance work

Guarantee that the paving contractor has liability insurance coverage. A visit to the web site of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has ever been the subject of complaints.

These details must be included in the contract:

- date of start and end of the work;

- proof of insurance;

- technical details;

- RBQ accreditation number.

You should be aware that a Concrete Maintenance contractor cannot demand you to make a deposit before work has started. But you need to agree on the payment provisions and make sure it's on the contract.

Before redoing the Concrete Maintenance drive to your new home by a builder, or acquiring some basic knowledge is imperative to make sure the job is done. Know first that the absence of compaction and the insufficient depth of the foundation are the two chief sources for the deformation or ripping of a layer of asphalt. If it's a new driveway, then it has to first be excavated to make room for a coating of crushed stone of sufficient depth. A geotextile membrane is going to be set beneath the granular backfill if the soil turns out to be very loamy (clayey). If you own a new house, it's best to wait 6 to 12 months before paving your drive, to allow the dirt to settle . In the case of a fix of this entry, an easy replacement of the Concrete Maintenance layer can be considered if the contractor believes that the present base is sufficient. In both scenarios, base redone or foundation maintained, the duration of its guarantee has to be exactly the same.

Concrete Maintenance Cullman Alabama

The weather conditions in our beautiful province can have a disastrous impact on an asphalt drive, hence the importance of including a slope with a minimum slope of 2%. This will allow water to drain into the road and minimize the risk of heaving or cracking. This significant detail must be taken into consideration when excavating and preserved during backfilling.

In case you have a van or recreational vehicle, notify the contractor prior to the start of the job: he is going to have the ability to provide materials accordingly. Some asphalt combinations produce an asphalt which is more immune to heavy-duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to reach a thickness of at least 5 cm (2 in) after being compacted. For optimum stability, the base should extend over the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also note that the setup of side supports around the foundation is a fantastic way to prevent possible cracks and this Concrete Maintenance done in cold weather will be of inferior quality. It is therefore far better to await the bright days to go back before starting work.

A Concrete Maintenance contract with your builder in Cullman

To avoid unpleasant surprises, then select your contractor diligently and be certain that the title and address of the business are written about the contract. The start and finish dates of the job, in addition to evidence of the contractor's liability insurance and also the technical details of this project to be completed, should also be included. No contractor should require a deposit before work begins. To prevent the inconvenience that might cause unforeseen expenses, take a look at the Concrete MaintenanceCullman website. You will thus have all the tools in hand to successfully complete your Concrete Maintenance project.

Concrete Maintenance Cullman - Greatest Alabama in Alabama!

For quality asphalting perform , phone on Concrete Maintenance, Cullman specialist team. Consult our Business department to figure out the regions served.

Parking Lot Repair And Striping Cullman | Snow Removal Cullman
Home >> alabama/cullman >> concrete maintenance
Share this...