Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt Coating in Daphne, Alabama


Tar And Chip Paving installed in an unstable surface could quickly lead to difficulties. There are 3 main choices for the Simple setup:

  1. Paving Over Existing Driveway: If your current driveway is in good condition rather than showing serious fractures or crumbling, hot asphalt mix can be laid directly over your driveway. 1 aspect is elevation: make certain fences, garage flooring, and other structures are not compromised by the greater level of the new surface.
  2. Eliminate old driveway, counter into the ground: The existing driveway is completely eliminated (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed right on the ground.
  3. Eliminate the old driveway and secure it to a solid surface. This is actually the preferred method. An aggregated stone floor partially replaces part of the hot asphalt mix. Generally 6 to 8 inches of limestone goes under 3 inches of asphalt.

Our Services:

The best time to install Tar And Chip Paving in Daphne

The more asphalt you operate, the more leeway you might have. For example, at 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also raises: 46 minutes. Generally, for thin asphalt programs (approximately 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you ought to speak to your contractor. The hot mix is ​​still functional in this period of time, however, the time is limited.

How much can an Tar And Chip Paving cost in Daphne?

Take into account the weather vagaries of our climate when deciding upon the quality of asphalt. The significant temperature variations we experience cause considerable damage to asphalt work.

Furthermore, it will be useful to tell the contractor if you have a recreational vehicle or even a van. He will have to accommodate the asphalt mixture so as to be more immune to the burden of heavy vehicles.

The advantages of Tar And Chip Paving

A driveway paved with asphalt has several advantages:

It'll cost you between $ 3 and $11 per square foot; the price varies depending on the characteristic of the asphalt employed and the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver can be up to 20 years, when the best conditions are satisfied. We are talking about a professional paving builder, a great grade of asphalt and also an optimal asphalt laying technique.

Tar And Chip Paving in Daphne: cost, quality of work and lifespan


The durability of residential asphalt paving chiefly depends upon the quality of the placing. Indeed, the major causes of deformation or ripping of an asphalt layer are the lack of compaction and a lean base. On the other hand, the upkeep of the asphalt sidewalk can be a determining factor in its longevity. That's to say, you'll have to seal your driveway once in ten decades, at a minimum, in order to maintain its good state.


We advise you to notify your asphalting builder in case you choose to have your driveway asphalt so as to sell your property. It may not be necessary to pay top dollar for laying asphalt , in this circumstance.

Tar And Chip Paving laying: price and contract

The choice of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, you will need to select it carefully.

Our guarantees and Tar And Chip Paving work

Guarantee that the paving contractor has liability insurance coverage. A trip to the web site of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has ever become the subject of complaints.

The following details must be included in the arrangement:

- date of start and finish of the work;

- proof of insurance;

- technical particulars;

- RBQ certification number.

You should be aware that a paving contractor cannot require that you make a deposit before work has started. However, you should agree on the payment terms and make sure it is on the contract.

A solid base for Tar And Chip Paving- Daphne

Prior to estimating the asphalt driveway to your new home by a builder, or acquiring some fundamental knowledge is imperative to make sure the job is well done. Know first that the lack of compaction and the inadequate thickness of the base are the two chief sources for the deformation or tearing of a coating of asphalt. If it's a new driveway, it has to initially be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane is going to be set under the granular backfill if the soil turns out to be very loamy (clayey). If you have a new home, it is best to wait for 6 to 12 months prior to paving your driveway, to allow the dirt to settle naturally. In the event of a repair of this entrance, an easy replacement of the asphalt layer can be considered if the contractor believes that the present foundation is sufficient. In both cases, foundation redone or base preserved, the whole period of its guarantee must be the same.

Tar And Chip Paving Daphne Alabama

The weather conditions in our lovely state may have a devastating effect on an asphalt driveway, hence the importance of adding a slope with a minimum slope of 2%. This will allow water to drain to the road and decrease the danger of heaving or cracking. This significant detail has to be taken into consideration when excavating and maintained during backfilling.

If you've got a van or recreational vehicle, notify the contractor before the onset of the work: he will have the ability to supply materials so. Some asphalt mixtures produce an asphalt which is more resistant to heavy-duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to reach a thickness of at least 5 cm (2 ) after being compacted. For optimal stability, the base should extend across the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also note that the installation of side supports around the foundation is a fantastic way to avoid possible cracks and that asphalting done in chilly weather is going to be of inferior quality. It's therefore far better to wait for the bright days to return before starting work.

A Tar And Chip Paving contract with your contractor in Daphne

To avoid unpleasant surprises, select your contractor and make certain that the title and address of his business are written on the contract. The start and finish dates of this work, in addition to proof of the contractor's liability insurance and the technical details of the project to be completed, should also be included. No contractor should require a down payment before work starts. To avoid the inconvenience that could cause unforeseen costs, take a look at the Tar And Chip PavingDaphne website. You will thus have all the resources in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Daphne - Best Alabama in Alabama!

For caliber asphalting work , call on Tar And Chip Paving, Daphne professional team. Consult our Business department to figure out the regions served.

Snow Removal Daphne | Asphalt Daphne
Home >> alabama/daphne >> tar and chip paving
Share this...