Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Alternatives for the asphalt Coating in Dothan, Alabama


Asphalt installed in an unstable surface can quickly lead to difficulties. There are 3 main choices for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good condition and not showing serious cracks or crumbling, hot asphalt mix can be placed directly within your driveway. One facet is elevation: make sure fences, garage floors, and other structures aren't compromised by the higher degree of the new surface.
  2. Eliminate old driveway, peg to the ground: The present driveway is completely eliminated (or you may not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed directly on the ground.
  3. Remove the old driveway and secure it to a good surface. This is actually the preferred method. An aggregated stone floor partially replaces part of the hot asphalt mix.

The longer asphalt you operate, the more leeway you have. For example, at 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also increases: 46 minutes. Generally, for lean asphalt applications (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you'll need to consult with your contractor. The hot mix is ​​still practical during this period of time, however, the time is limited.

How much can an Asphalt cost in Dothan?

Take into account the weather vagaries of the climate when deciding upon the quality of asphalt. The substantial temperature variations we experience cause considerable damage to asphalt work.

In addition, it'll be good to tell the contractor should you own a recreational vehicle or a van. He will need to accommodate the asphalt mix so as to be more immune to the weight of heavy vehicles.

The Benefits of Asphalt

  • Smooth finish;
  • non-slip
  • easy to maintain
  • watertightness guaranteed
  • withstands the rigors of this Quebec climate quite well (provided it has been installed );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt employed along with the paving contractor.

For a sustainable Asphalt

The existence of an asphalt paver may be up to 20 decades, when the very best states are satisfied. We are referring to a professional paving builder, a good grade of asphalt as well as also an optimal asphalt laying technique.

Asphalt in Dothan: cost, quality of work and lifespan


The longevity of residential asphalt paving chiefly is dependent upon the standard of the placing. Really, the significant causes of deformation or tearing of an asphalt coating are the lack of compaction and a thin foundation. On the other hand, the maintenance of the asphalt pavement can be a determining factor in its own longevity. That is to say, you will need to seal your drive once in ten decades, at a minimum, in order to maintain its good condition.


We advise you to notify your asphalting builder in case you choose to get your driveway asphalt in order to sell your property. It may not be necessary to pay top dollar for placing asphalt , in such a circumstance.

Asphalt placing: cost and contract

The option of the asphalt laying contractor is essential. In order not to have unpleasant surprises, you will have to choose it carefully.

Our guarantees and Asphalt work

Guarantee that the paving contractor has liability insurance coverage. A visit to the website of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has become the subject of complaints.

The following details should be included in the arrangement:

- date of beginning and finish of the work;

- evidence of insurance;

- technical particulars;

- RBQ accreditation number.

You should be aware that a paving builder can't demand that you make a deposit before work has begun. However, you should agree on the payment provisions and be sure it's about the contract.

A solid base for Asphalt- Dothan

Prior to estimating the asphalt drive to your new home by a contractor, or acquiring some fundamental knowledge is imperative to guarantee that the job is well done. Know first that the absence of compaction and the inadequate thickness of the base are the two main causes of the deformation or tearing of a coating of asphalt. When it is a new driveway, then it must first be excavated to make room for a layer of crushed stone of sufficient depth. A geotextile membrane will be placed under the granular backfill if the dirt turns out to be very loamy (clayey). If you own a new house, it is best to wait 6 to 12 months before paving your drive, to enable the dirt to settle naturally. In the event of a fix of the entry, a simple replacement of the asphalt coating can be considered in the event the contractor believes that the present foundation is adequate. In both scenarios, base redone or base maintained, the whole period of its guarantee must be the same.

Asphalt Dothan Alabama

The weather conditions in our beautiful province can have a devastating effect on an asphalt driveway, thus the importance of including a slope having a minimum slope of 2%. This will allow water to drain into the road and minimize the danger of heaving or cracking. This important detail has to be taken into account when excavating and maintained during backfilling.

If you have a van or recreational vehicle, notify the contractor before the onset of the job: he is going to have the ability to supply materials accordingly. Some asphalt combinations produce an asphalt that is more resistant to heavy duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of 5 cm (2 in) after being compacted. For optimum stability, the base should extend across the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also mention that the setup of unwanted supports around the foundation is a fantastic method to avoid potential cracks and this asphalting done in cold weather is going to be of poor quality. It's therefore far better to await the sunny days to return before starting work.

A definite contract with your builder in Dothan

To avoid unpleasant surprises, select your contractor and be certain the title and address of his company are written about the contract. The start and finish dates of the work, as well as evidence of the builder's liability insurance and also the technical details of this job to be carried out, should also be included. No contractor should require a down payment before work starts. To avoid the inconvenience that might cause unforeseen expenses, visit the AsphaltDothan site. You will thus have all the tools in hand to successfully complete your asphalt paving project.

Asphalt Dothan - Best Alabama at Alabama!

For quality asphalting perform , call on Asphalt, Dothan specialist team. Confirm our Company section to find out the regions served.

Tar And Chip Paving Dothan | Parking Lot Repair And Striping Dothan
Home >> alabama/dothan >> asphalt
Share this...