Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt Coating in Dothan, Alabama


Tar And Chip Paving installed on an unstable surface could quickly lead to problems. There are 3 main choices for the Simple setup:

  1. Paving Over Existing Driveway: If your current driveway is in good condition and not showing serious cracks or crumbling, hot asphalt mix can be placed directly within your driveway. One aspect is elevation: make certain fences, garage floors, and other structures aren't compromised by the higher level of this surface.
  2. Remove old driveway, counter into the floor: The existing driveway is completely removed (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed directly on the ground.
  3. Eliminate the old driveway and secure it to a good surface. This is actually the preferred method. An aggregated stone flooring partly replaces part of the hot asphalt mix.

Our Services:

The best time to install Tar And Chip Paving from Dothan

The longer asphalt you operate, the more leeway you have. By way of instance, at 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also increases: 46 minutes. Generally, for thin asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to speak to your contractor. The hot mix remains practical during this period, however, the time is limited.

How much can an Tar And Chip Paving cost in Dothan?

Consider the weather vagaries of our climate when choosing the standard of asphalt. The significant temperature variations that we experience cause considerable damage to asphalt perform.

Furthermore, it will be good to distinguish the contractor should you have a recreational vehicle or a van. He will need to accommodate the asphalt mixture so as to be more resistant to the burden of heavy vehicles.

The Benefits of Tar And Chip Paving

  • Smooth finish;
  • non-slip
  • easy to maintain
  • watertightness ensured
  • withstands the rigors of the Quebec climate very well (provided it's been installed optimally);
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost varies depending on the characteristic of the asphalt employed and the paving contractor.

To get a sustainable Tar And Chip Paving

The existence of an asphalt paver can be up to 20 decades, when the very best states are met. We are referring to a professional paving contractor, a great quality of asphalt and an optimal asphalt laying technique.

Tar And Chip Paving in Dothan: price, quality of work and lifespan


The durability of residential asphalt paving largely is dependent upon the quality of the laying. Indeed, the major causes of deformation or tearing of an asphalt layer are the lack of compaction and a lean base. On the other hand, the upkeep of the asphalt pavement is also a deciding factor in its own longevity. That's to say, you'll need to seal your drive once in 10 years, at a minimum, so as to keep its great condition.


We suggest that you inform your asphalting builder in case you decide to have your driveway asphalt so as to sell your property. It might not be necessary to pay top dollar for laying asphalt , in this case.

Tar And Chip Paving placing: price and contract

The choice of the asphalt laying builder is indispensable. In order to not have unpleasant surprises, then you'll have to select it carefully.

Make sure the paving contractor has liability insurance coverage. A visit to the web site of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has ever been the subject of complaints.

These details should be included in the arrangement:

- date of beginning and finish of the job;

- evidence of insurance;

- technical particulars;

- RBQ accreditation number.

You should be aware that a paving builder can't demand you to make a deposit before work has begun. But you need to agree on the payment provisions and make sure it is on the contract.

Prior to estimating the asphalt drive to your new home by a contractor, or acquiring some fundamental knowledge is vital to guarantee that the job is well done. Know first that the absence of compaction and the insufficient depth of the foundation are the two main sources for the deformation or tearing of a layer of asphalt. If it is a new driveway, then it must initially be excavated to make room for a layer of crushed stone of sufficient thickness. A geotextile membrane will be set beneath the granular backfill if the dirt proves to be very loamy (clayey). If you have a new house, it's best to wait 6 to 12 months prior to paving your drive, to enable the soil to settle . In the case of a fix of this entrance, an easy replacement of the asphalt coating can be considered if the contractor believes that the present foundation is sufficient. In both cases, foundation redone or foundation maintained, the duration of its guarantee has to be the same.

Tar And Chip Paving Dothan Alabama

The weather conditions in our beautiful province may have a devastating effect on an asphalt driveway, thus the significance of adding a slope having a minimum slope of 2%. This will allow water to drain to the street and minimize the risk of heaving or cracking. This important detail has to be taken into account when excavating and preserved during backfilling.

In case you've got a van or recreational vehicle, notify the contractor prior to the onset of the work: he is going to be able to provide materials accordingly. Some asphalt combinations produce an asphalt that is more resistant to heavy duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) so as to reach a thickness of 5 cm (2 in) after being compacted. For optimal stability, the foundation should extend across the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also mention that the installation of unwanted supports around the foundation is a good way to avoid possible cracks and this asphalting done in chilly weather will be of inferior quality. It is therefore far better to wait for the bright days to go back before starting work.

A Tar And Chip Paving contract with your contractor in Dothan

To avoid unpleasant surprises, select your contractor diligently and be certain that the title and address of the company are composed about the contract. The start and end dates of the job, as well as evidence of this builder's liability insurance and also the technical specifics of this job to be carried out, should also be included. No contractor should require a deposit before work begins. To avoid the inconvenience that might lead to unforeseen expenses, take a look at the Tar And Chip PavingDothan website. You will thus have the tools in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Dothan - Greatest Alabama at Alabama!

For quality asphalting perform , call on Tar And Chip Paving, Dothan professional team. Confirm our Business department to find out the regions served.

Snow Removal Dothan | Asphalt Dothan
Home >> alabama/dothan >> tar and chip paving
Share this...