Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Alternatives for the asphalt surface in East Florence, Alabama


Asphalt installed in an unstable surface could quickly lead to problems. There are 3 Chief options for the basic setup:

  1. Paving Over Existing Driveway: If your current driveway is in good condition and not revealing severe fractures or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 aspect is elevation: make sure fences, garage flooring, and other structures are not jeopardized by the higher level of the new surface.
  2. Remove old driveway, peg to the floor: The existing driveway is totally eliminated (or you might not have a driveway yet) and 4 to 6 inches of warm paving stone is put right on the ground.
  3. Remove the old driveway and secure it to a good surface. This is actually the preferred method. An aggregated stone floor partially replaces part of this hot asphalt mixture. Generally 6 to 8 inches of limestone extends under 3 inches of asphalt.

The more asphalt you operate, the more leeway you might have. For example, at 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also raises: 46 minutes. Generally, for lean asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, then you'll need to consult with your contractor. The hot mix is ​​still practical during this period of time, but the time is limited.

How much can an Asphalt price in East Florence?

Consider the weather vagaries of the climate when deciding upon the quality of asphalt. The significant temperature variations that we experience cause considerable damage to asphalt work.

In addition, it will be good to tell the contractor should you have a recreational vehicle or a van. He will have to adapt the asphalt mix in order to be more resistant to the weight of heavy vehicles.

The Benefits of Asphalt

A driveway paved with asphalt has several advantages:

It'll cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt employed and the paving contractor.

To get a sustainable Asphalt

The life of an asphalt paver can be up to 20 decades, when the best states are satisfied. We're talking about a professional paving builder, a great quality of asphalt as well as an optimal asphalt laying technique.

Asphalt in East Florence: cost, quality of work and lifespan


The durability of residential asphalt paving largely is dependent on the quality of the placing. Indeed, the major causes of deformation or tearing of an asphalt coating are the absence of compaction and a lean base. On the other hand, the maintenance of the asphalt sidewalk is also a determining factor in its longevity. That is to say, you will need to seal your driveway once in 10 decades, at a minimum, in order to keep its good state.


We advise you to inform your asphalting contractor in case you decide to have your driveway asphalt in order to sell your property. It may not be essential to pay top dollar for laying asphalt , in such a case.

Asphalt placing: price and contract

The choice of the asphalt laying builder is indispensable. In order to not have unpleasant surprises, you will have to choose it carefully.

Make sure the paving contractor has liability insurance. A trip to the website of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has ever become the subject of complaints.

The following details must be included in the arrangement:

- date of start and end of the job;

- proof of insurance;

- technical particulars;

- RBQ accreditation number.

You should know that a paving builder can't demand you to make a down payment before work has begun. But you need to agree to the payment provisions and make sure it's about the contract.

A solid base for Asphalt- East Florence

Before redoing the asphalt driveway to your new home by a contractor, or acquiring some basic knowledge is vital to make sure the job is done. Know first that the absence of compaction and the inadequate thickness of the foundation are the two main sources for the deformation or ripping of a layer of asphalt. When it's a new driveway, it has to initially be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane will be placed under the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you have a new home, it is ideal to wait 6 to 12 months prior to paving your driveway, to allow the dirt to settle naturally. In the event of a fix of the entrance, an easy replacement of the asphalt layer can be considered if the contractor considers that the existing foundation is sufficient. In both scenarios, foundation redone or base preserved, the whole period of its guarantee has to be the same.

Asphalt East Florence Alabama

The weather conditions in our beautiful province may have a devastating effect on an asphalt drive, hence the significance of including a slope with a minimum slope of 2%. This will allow water to drain to the street and minimize the risk of heaving or cracking. This important detail must be taken into consideration when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the builder before the start of the job: he will be able to supply materials so. Some asphalt combinations produce an asphalt that is more resistant to heavy duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the base should extend across the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also mention that the setup of side supports around the foundation is a fantastic method to prevent potential cracks and this asphalting done in chilly weather will be of poor quality. It's therefore better to wait for the sunny days to return before starting work.

A definite contract with your contractor in East Florence

To avoid unpleasant surprises, then choose your contractor and make certain that the title and address of the business are written on the contract. The beginning and finish dates of the work, in addition to evidence of this builder's liability insurance and the technical details of the job to be carried out, should also be included. No contractor should require a deposit before work begins. To prevent the inconvenience that could cause unforeseen costs, visit the AsphaltEast Florence website. You may thus have the tools in hand to successfully finish your asphalt paving project.

Asphalt East Florence - Greatest Alabama at Alabama!

For caliber asphalting work , phone on Asphalt, East Florence specialist team. Consult our Company department to find out the regions served.

Tar And Chip Paving East Florence | Parking Lot Repair And Striping East Florence
Home >> alabama/east florence >> asphalt
Share this...