Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt surface in East Florence, Alabama


Tar And Chip Paving installed in an unstable surface can quickly lead to difficulties. There are three main choices for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good condition rather than revealing severe fractures or crumbling, hot asphalt mix can be placed directly within your driveway. 1 facet is elevation: make sure fences, garage flooring, and other constructions are not compromised by the higher level of this surface.
  2. Eliminate old driveway, peg to the floor: The present driveway is totally removed (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed right on the ground.
  3. Eliminate the old driveway and fasten it to a solid surface. This is the preferred method. An aggregated stone floor partially replaces part of the hot asphalt mixture. Typically 6 to 8 inches of aggregate extends under 3 inches of asphalt.

Our Services:

The best time to install Tar And Chip Paving in East Florence

The longer asphalt you operate, the more leeway you have. By way of instance, at 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. In general, for lean asphalt applications (about 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you'll need to consult with your contractor. The hot mix remains practical during this period, but the time is constrained.

How much does an Tar And Chip Paving price in East Florence?

Take into account the weather vagaries of the climate when deciding upon the standard of asphalt. The substantial temperature variations that we experience cause appreciable damage to asphalt perform.

Furthermore, it'll be good to tell the contractor if you have a recreational vehicle or even a van. He will need to accommodate the asphalt mixture so as to be more immune to the burden of heavy vehicles.

The Benefits of Tar And Chip Paving

  • Smooth finish;
  • non invasive
  • Simple to maintain
  • watertightness ensured
  • withstands the rigors of the Quebec climate quite well (provided it's been set up );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt used and the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver may be around 20 years, when the very best states are met. We are talking about a professional paving builder, a great grade of asphalt as well as an optimal asphalt laying technique.

Tar And Chip Paving in East Florence: price, quality of work and lifespan


The longevity of residential asphalt paving largely is dependent upon the quality of the laying. Really, the significant causes of deformation or ripping of an asphalt coating are the absence of compaction plus a thin foundation. However, the upkeep of the asphalt sidewalk can be a determining factor in its own longevity. That is to say, you'll need to seal your driveway once in 10 decades, at a minimum, in order to keep its good state.


We suggest that you inform your asphalting contractor if you choose to get your driveway asphalt in order to sell your property. It may not be necessary to pay top dollar for laying asphalt , in this circumstance.

Tar And Chip Paving placing: cost and contract

The choice of the asphalt laying builder is indispensable. In order to not have unpleasant surprises, you will have to choose it carefully.

Make sure the paving contractor has liability insurance coverage. A trip to the website of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has ever become the subject of complaints.

These details should be included in the contract:

- date of start and end of the work;

- evidence of insurance;

- technical particulars;

- RBQ certification number.

You should be aware that a paving builder can't demand that you make a down payment before work has started. However, you should agree to the payment terms and be sure it's on the contract.

A solid foundation for Tar And Chip Paving- East Florence

Prior to estimating the asphalt drive to your new home by a contractor, or obtaining some basic knowledge is vital to guarantee that the job is done. Know first that the lack of compaction and the insufficient depth of the base are the two chief causes of the deformation or tearing of a coating of asphalt. If it's a new driveway, then it has to first be excavated to make room for a coating of crushed stone of sufficient thickness. A geotextile membrane is going to be set beneath the granular backfill if the soil turns out to be somewhat loamy (clayey). If you own a new home, it's ideal to wait for 6 to 12 months prior to paving your driveway, to allow the dirt to settle . In the event of a fix of this entry, an easy replacement of the asphalt layer can be considered if the contractor considers that the present base is adequate. In both scenarios, foundation redone or foundation preserved, the whole period of its guarantee has to be the same.

Tar And Chip Paving East Florence Alabama

The weather conditions in our lovely state may have a disastrous impact on an asphalt driveway, hence the significance of adding a slope having a minimum slope of 2%. This will enable water to drain into the road and decrease the risk of heaving or cracking. This significant detail must be taken into consideration when excavating and preserved during backfilling.

In case you've got a van or recreational vehicle, notify the builder before the onset of the work: he is going to be able to provide materials accordingly. Some asphalt mixtures produce an asphalt which is more resistant to heavy-duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) so as to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimal stability, the foundation should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also note that the installation of unwanted supports around the foundation is a fantastic method to prevent possible cracks and that asphalting done in chilly weather is going to be of poor quality. It is therefore better to await the sunny days to go back before beginning work.

A definite contract with your builder in East Florence

To avoid unpleasant surprises, select your contractor and be certain that the title and address of the business are written on the contract. The start and finish dates of this work, in addition to evidence of the builder's liability insurance and also the technical specifics of the project to be carried out, should also be included. No contractor should need a down payment before work starts. To prevent the inconvenience that might cause unforeseen costs, take a look at the Tar And Chip PavingEast Florence site. You will thus have all the tools in hand to successfully complete your asphalt paving project.

Tar And Chip Paving East Florence - Greatest Alabama at Alabama!

For caliber asphalting work , phone on Tar And Chip Paving, East Florence specialist team. Consult our Business section to find out the regions served.

Snow Removal East Florence | Asphalt East Florence
Home >> alabama/east florence >> tar and chip paving
Share this...