Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt Coating in Enterprise, Alabama


Asphalt installed on an unstable surface can quickly lead to problems. There are 3 main options for the basic setup:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition rather than showing severe cracks or crumbling, hot asphalt mix can be laid directly over your driveway. 1 aspect is height: make certain fences, garage flooring, and other constructions are not compromised by the greater level of the surface.
  2. Remove old driveway, peg to the ground: The existing driveway is completely eliminated (or you may not have a driveway yet) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Eliminate the old driveway and secure it to a solid surface. This is the preferred method. An aggregated stone floor partly replaces part of this hot asphalt mix.

Our Services:

The best time to install Asphalt from Enterprise

The longer asphalt you work, the more leeway you have. For instance, in 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also increases: 46 minutes. Generally, for thin asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you'll need to speak to your contractor. The hot mix remains functional during this period, but the time is limited.

How much can an Asphalt cost in Enterprise?

Take into account the weather vagaries of our climate when choosing the quality of asphalt. The substantial temperature variations we experience cause considerable damage to asphalt work.

Furthermore, it will be good to tell the contractor should you have a recreational vehicle or even a van. He will have to adapt the asphalt mix in order to be more immune to the weight of heavy vehicles.

The Benefits of Asphalt

  • Smooth end;
  • non-slip
  • easy to maintain
  • watertightness ensured
  • withstands the rigors of the Quebec climate very well (provided it has been set up );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt used along with the paving contractor.

For a sustainable Asphalt

The existence of an asphalt paver may be up to 20 years, when the very best states are satisfied. We are referring to a professional paving contractor, a good grade of asphalt and an optimal asphalt laying technique.

Asphalt in Enterprise: price, quality of work and lifespan


The durability of residential asphalt paving largely is dependent upon the quality of the laying. Really, the major causes of deformation or tearing of an asphalt coating are the lack of compaction and a thin foundation. On the other hand, the maintenance of the asphalt sidewalk is also a determining factor in its own longevity. That is to say, you will need to seal your drive once in ten decades, at a minimum, so as to maintain its great state.


We suggest that you notify your asphalting contractor in case you decide to get your driveway asphalt so as to offer your property. It may not be necessary to pay top dollar for laying asphalt , in such a case.

Asphalt placing: cost and contract

The choice of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, you will need to choose it carefully.

Make sure the paving contractor has liability insurance coverage. A visit to the website of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has ever become the subject of complaints.

These details should be included in the contract:

- date of start and finish of the job;

- evidence of insurance;

- technical details;

- RBQ accreditation number.

You should know that a paving contractor can't require you to make a deposit before work has started. But you need to agree on the payment provisions and be sure it's on the contract.

Before redoing the asphalt driveway to your new residence by a contractor, or obtaining some fundamental knowledge is vital to guarantee that the job is done. Know first that the absence of compaction and the inadequate depth of the foundation are the two chief causes of the deformation or ripping of a coating of asphalt. When it is a new driveway, it must initially be excavated to make room for a layer of crushed stone of adequate thickness. A geotextile membrane will be set beneath the granular backfill if the dirt turns out to be very loamy (clayey). If you own a new home, it is best to wait 6 to 12 months prior to paving your driveway, to enable the soil to settle . In the event of a fix of this entrance, an easy replacement of the asphalt coating can be considered if the contractor considers that the present base is sufficient. In both scenarios, base redone or foundation preserved, the duration of its guarantee must be the same.

Asphalt Enterprise Alabama

The weather conditions in our beautiful province can have a devastating effect in an asphalt driveway, hence the significance of adding a slope having a minimum slope of 2%. This will allow water to drain to the road and minimize the danger of heaving or cracking. This important detail must be taken into consideration when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the contractor before the start of the work: he will have the ability to provide materials so. Some asphalt combinations produce an asphalt which is more immune to heavy duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to accomplish a thickness of at least 5 cm (2 in) after being compacted. For optimum stability, the foundation should extend across the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also mention that the installation of unwanted supports around the base is a fantastic way to prevent possible cracks and that asphalting done in cold weather is going to be of poor quality. It's therefore far better to await the sunny days to go back before beginning work.

A definite contract with your contractor in Enterprise

To avoid unpleasant surprises, then choose your contractor diligently and make sure the name and address of his business are composed about the contract. The beginning and finish dates of this work, in addition to proof of this builder's liability insurance and also the technical specifics of the project to be carried out, should also be included. No contractor should need a deposit before work begins. To prevent the inconvenience that could lead to unforeseen costs, take a look at the AsphaltEnterprise website. You may thus have all the resources in hand to successfully finish your asphalt paving project.

Asphalt Enterprise - Best Alabama at Alabama!

For caliber asphalting work , call on Asphalt, Enterprise professional team. We have more than twenty decades of experience in asphalt laying, resurfacing, maintenance and repair. Confirm our Company section to find out the regions served.

Tar And Chip Paving Enterprise | Parking Lot Repair And Striping Enterprise
Home >> alabama/enterprise >> asphalt
Share this...