Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Snow Removal- Alternatives for the asphalt surface in Enterprise, Alabama


Snow Removal installed in an unstable surface could quickly lead to difficulties. There are three Chief choices for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good condition rather than revealing serious cracks or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 facet is height: make certain fences, garage floors, and other constructions are not compromised by the higher level of this new surface.
  2. Eliminate old driveway, counter into the floor: The present driveway is completely removed (or you may not have a driveway yet) and 4 to 6 inches of hot paving stone is placed right on the ground.
  3. Eliminate the old driveway and secure it to a solid surface. This is actually the preferred method. An aggregated stone floor partly replaces part of the hot asphalt mixture. Generally 6 to 8 inches of aggregate goes under 3 inches of asphalt.

The more asphalt you operate, the more leeway you have. For instance, in 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. Generally, for lean asphalt applications (approximately 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to consult with your contractor. The hot mix is ​​still functional in this period, however, the time is limited.

How much does an Snow Removal price in Enterprise?

Take into account the weather vagaries of the climate when choosing the standard of asphalt. The significant temperature variations that we experience cause appreciable damage to asphalt perform.

In addition, it will be useful to distinguish the contractor if you have a recreational vehicle or a van. He might need to adapt the asphalt mix in order to be more resistant to the burden of heavy vehicles.

The Benefits of Snow Removal

  • Smooth end;
  • non-slip
  • Simple to Keep
  • watertightness ensured
  • withstands the rigors of the Quebec climate quite well (provided it's been set up );
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt used along with the paving contractor.

To get a sustainable Snow Removal

The existence of an asphalt paver can be up to 20 decades, when the best conditions are satisfied. We are referring to a professional paving builder, a good grade of asphalt as well as also an optimal asphalt laying technique.


The durability of residential asphalt paving chiefly is dependent on the standard of the placing. Indeed, the significant causes of deformation or ripping of an asphalt coating are the absence of compaction plus a lean base. On the other hand, the maintenance of the asphalt pavement can be a deciding factor in its own longevity. That is to say, you will need to seal your drive once in 10 decades, at a minimum, so as to maintain its great state.


We suggest that you inform your asphalting contractor in case you decide to have your driveway asphalt in order to sell your property. It may not be essential to pay top dollar for laying asphalt , in this circumstance.

Snow Removal placing: price and contract

The option of the asphalt laying builder is indispensable. In order not to have unpleasant surprises, then you'll need to select it carefully.

Guarantee that the paving contractor has liability insurance. A trip to the web site of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has been the subject of complaints.

These details must be included in the arrangement:

- date of start and end of the job;

- proof of insurance;

- technical details;

- RBQ accreditation number.

You should be aware that a paving builder can't demand you to make a down payment before work has started. But you need to agree to the payment terms and be sure it's on the contract.

Prior to estimating the asphalt driveway to your new home by a builder, or obtaining some fundamental knowledge is imperative to make sure the job is well done. Know first that the absence of compaction and the inadequate thickness of the foundation are the two chief causes of the deformation or tearing of a coating of asphalt. If it's a new driveway, then it has to first be excavated to make room for a layer of crushed stone of sufficient depth. A geotextile membrane is going to be set beneath the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you have a new house, it is ideal to wait for 6 to 12 months before paving your drive, to enable the dirt to settle . In the case of a fix of the entrance, an easy replacement of the asphalt layer can be considered if the contractor believes that the present foundation is adequate. In both cases, base redone or foundation maintained, the whole period of its guarantee must be the same.

Snow Removal Enterprise Alabama

The weather conditions in our lovely state may have a devastating effect in an asphalt drive, hence the significance of adding a slope having a minimum slope of 2%. This will allow water to drain to the road and decrease the risk of heaving or cracking. This significant detail has to be taken into account when excavating and maintained during backfilling.

In case you have a van or recreational vehicle, notify the builder prior to the onset of the job: he is going to be able to supply materials accordingly. Some asphalt combinations produce an asphalt which is more resistant to heavy duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the base should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also note that the setup of unwanted supports around the base is a fantastic way to prevent possible cracks and this asphalting done in chilly weather is going to be of inferior quality. It is therefore better to wait for the sunny days to go back before beginning work.

To avoid unpleasant surprises, then select your contractor and make sure the name and address of the business are written about the contract. The beginning and finish dates of the job, as well as evidence of the builder's liability insurance and also the technical specifics of the project to be completed, should also be included. No contractor should require a deposit before work begins. To prevent the inconvenience that could lead to unforeseen expenses, take a look at the Snow RemovalEnterprise website. You will thus have all the tools in hand to successfully finish your asphalt paving project.

Snow Removal Enterprise - Best Alabama at Alabama!

For caliber asphalting perform , call on Snow Removal, Enterprise specialist team. Confirm our Company section to find out the regions served.

Concrete Maintenance Enterprise | Tar And Chip Paving Enterprise
Home >> alabama/enterprise >> snow removal
Share this...