Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt surface in Fairhope, Alabama


Tar And Chip Paving installed in an unstable surface could quickly lead to difficulties. There are 3 main choices for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape rather than revealing severe fractures or crumbling, hot asphalt mix can be placed directly within your driveway. 1 facet is height: make sure fences, garage floors, and other structures aren't compromised by the higher level of this new surface.
  2. Eliminate old driveway, peg to the ground: The present driveway is totally removed (or you may not have a driveway yet) and 4 to 6 inches of warm paving stone is placed directly on the ground.
  3. Remove the old driveway and secure it into a solid surface. This is actually the preferred method. An aggregated stone floor partially replaces part of the hot asphalt mixture. Generally 6 to 8 inches of aggregate goes under 3 inches of asphalt.

The more asphalt you work, the more leeway you might have. By way of instance, in 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. Generally, for lean asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you ought to speak to your contractor. The hot mix remains practical in this period of time, but the time is constrained.

How much does an Tar And Chip Paving cost in Fairhope?

Take into account the weather vagaries of the climate when choosing the standard of asphalt. The significant temperature variations that we experience cause considerable damage to asphalt work.

Furthermore, it will be useful to distinguish the contractor if you have a recreational vehicle or even a van. He will have to accommodate the asphalt mixture so as to be more resistant to the weight of heavy vehicles.

The Benefits of Tar And Chip Paving

  • Smooth finish;
  • non-slip
  • Simple to Keep
  • watertightness guaranteed
  • withstands the rigors of this Quebec climate very well (provided it has been set up );
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost varies depending on the characteristic of the asphalt used along with the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver may be around 20 years, when the best conditions are satisfied. We're talking about a professional paving builder, a great quality of asphalt and an optimal asphalt laying technique.


The longevity of residential asphalt paving largely is dependent on the standard of the placing. Indeed, the major causes of deformation or ripping of an asphalt coating are the lack of compaction plus a thin foundation. However, the upkeep of the asphalt pavement can be a deciding factor in its own longevity. That is to say, you will need to seal your drive once in 10 decades, at a minimum, so as to keep its good condition.


We suggest that you notify your asphalting builder if you choose to have your driveway asphalt so as to sell your property. It may not be necessary to pay top dollar for laying asphalt , in this case.

Tar And Chip Paving placing: price and contract

The option of the asphalt laying builder is essential. In order not to have unpleasant surprises, you'll have to choose it carefully.

Make sure the paving contractor has liability insurance. A visit to the website of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has ever become the subject of complaints.

These details should be included in the arrangement:

- date of start and end of the work;

- evidence of insurance;

- technical details;

- RBQ accreditation number.

You ought to know that a paving contractor cannot demand that you make a down payment before work has started. However, you should agree to the payment provisions and make sure it's on the contract.

Prior to estimating the asphalt driveway to your new home by a contractor, or obtaining some basic knowledge is vital to guarantee that the job is done. Know first that the lack of compaction and the inadequate thickness of the base are the two main sources for the deformation or ripping of a coating of asphalt. When it's a new driveway, it must first be excavated to make room for a coating of crushed stone of sufficient depth. A geotextile membrane will be set under the granular backfill if the soil turns out to be somewhat loamy (clayey). If you own a new house, it's best to wait 6 to 12 months before paving your drive, to allow the dirt to settle . In the case of a repair of the entry, a simple replacement of the asphalt layer can be considered in the event the contractor believes that the present base is sufficient. In both scenarios, foundation redone or base preserved, the duration of its guarantee has to be the same.

Tar And Chip Paving Fairhope Alabama

The weather conditions in our lovely state may have a devastating effect on an asphalt driveway, thus the significance of adding a slope with a minimum slope of 2%. This will enable water to drain into the street and minimize the risk of heaving or cracking. This important detail must be taken into account when excavating and maintained during backfilling.

In case you've got a van or recreational vehicle, notify the contractor prior to the onset of the work: he will have the ability to provide materials so. Some asphalt mixtures produce an asphalt that is more immune to heavy duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to accomplish a thickness of 5 cm (2 ) after being compacted. For optimal stability, the foundation should extend across the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also note that the setup of side supports around the foundation is a fantastic way to avoid possible cracks and that asphalting done in chilly weather is going to be of inferior quality. It's therefore better to await the sunny days to go back before beginning work.

A definite contract with your contractor in Fairhope

To avoid unpleasant surprises, then select your contractor and make sure the title and address of the business are composed on the contract. The start and end dates of this job, as well as proof of this contractor's liability insurance and the technical details of the job to be carried out, should also be included. No contractor should need a deposit before work starts. To prevent the inconvenience that might lead to unforeseen costs, take a look at the Tar And Chip PavingFairhope website. You may thus have all the tools in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Fairhope - Greatest Alabama in Alabama!

For caliber asphalting perform , call on Tar And Chip Paving, Fairhope specialist team. We've got over 20 decades of expertise in asphalt laying, resurfacing, maintenance and repair. Confirm our Company section to find out the regions served.

Snow Removal Fairhope | Asphalt Fairhope
Home >> alabama/fairhope >> tar and chip paving
Share this...