Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt surface in Fort Payne, Alabama


Asphalt installed in an unstable surface can quickly lead to problems. There are three main options for the basic setup:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not showing severe cracks or crumbling, hot asphalt mixture can be placed directly within your driveway. One facet is height: make sure fences, garage floors, and other structures are not compromised by the greater degree of this new surface.
  2. Eliminate old driveway, counter into the floor: The existing driveway is completely removed (or you might not have a driveway yet) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Remove the old driveway and secure it to a solid surface. This is the preferred method. An aggregated stone flooring partly replaces part of the hot asphalt mixture. Typically 6 to 8 inches of limestone goes under 3 inches of asphalt.

Our Services:

The best time to install Asphalt from Fort Payne

The more asphalt you work, the more leeway you have. By way of instance, in 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. Generally, for lean asphalt programs (about 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you'll need to speak to your contractor. The hot mix is ​​still functional during this period, but the time is limited.

How much can an Asphalt price in Fort Payne?

Consider the weather vagaries of our climate when deciding upon the standard of asphalt. The substantial temperature variations we experience cause appreciable damage to asphalt perform.

Furthermore, it will be useful to distinguish the contractor should you own a recreational vehicle or even a van. He might have to accommodate the asphalt mixture in order to be more resistant to the burden of heavy vehicles.

The Benefits of Asphalt

A driveway paved with asphalt has several advantages:

It'll cost you between $ 3 and $11 per square foot; the price varies depending on the quality of the asphalt used and the paving contractor.

To get a sustainable Asphalt

The life of an asphalt paver can be up to 20 decades, when the very best conditions are satisfied. We're referring to a professional paving builder, a good quality of asphalt as well as an optimal asphalt laying technique.

Asphalt in Fort Payne: cost, quality of work and lifespan


The durability of residential asphalt paving chiefly is dependent upon the standard of the laying. Indeed, the major causes of deformation or ripping of an asphalt layer are the lack of compaction and a lean base. However, the upkeep of the asphalt sidewalk can be a deciding factor in its own longevity. That is to say, you will need to seal your driveway once in ten years, at a minimum, so as to maintain its great state.


We suggest that you notify your asphalting builder in case you decide to have your driveway asphalt so as to offer your property. It might not be essential to pay top dollar for laying asphalt , in this circumstance.

Asphalt laying: cost and contract

The option of the asphalt laying builder is essential. In order not to have unpleasant surprises, then you'll have to choose it carefully.

Our ensures and Asphalt work

Guarantee that the paving contractor has liability insurance. A trip to the website of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has become the subject of complaints.

These details must be included in the contract:

- date of beginning and end of the job;

- evidence of insurance;

- technical particulars;

- RBQ certification number.

You should know that a paving builder can't demand you to make a deposit before work has begun. However, you should agree on the payment provisions and make sure it's about the contract.

Before redoing the asphalt drive to your new residence by a contractor, or acquiring some basic knowledge is vital to guarantee that the job is done. Know first that the lack of compaction and the insufficient depth of the foundation are the two main sources for the deformation or tearing of a coating of asphalt. If it is a new driveway, then it must first be excavated to make room for a layer of crushed stone of adequate depth. A geotextile membrane is going to be placed beneath the granular backfill if the soil proves to be very loamy (clayey). If you have a new home, it is best to wait 6 to 12 months prior to paving your driveway, to allow the dirt to settle . In the case of a repair of this entrance, an easy replacement of the asphalt coating can be considered in the event the contractor considers that the existing base is adequate. In both cases, foundation redone or base preserved, the whole period of its warranty must be the same.

Asphalt Fort Payne Alabama

The weather conditions in our lovely state can have a devastating effect in an asphalt driveway, thus the significance of adding a slope with a minimum slope of 2%. This will allow water to drain into the street and decrease the danger of heaving or cracking. This significant detail must be taken into consideration when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the contractor before the onset of the job: he will be able to provide materials accordingly. Some asphalt mixtures produce an asphalt that is more resistant to heavy-duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) so as to accomplish a thickness of 5 cm (2 in) after being compacted. For optimum stability, the foundation should extend over the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also note that the setup of side supports around the foundation is a fantastic way to prevent possible cracks and that asphalting done in cold weather is going to be of inferior quality. It's therefore better to wait for the bright days to go back before beginning work.

To avoid unpleasant surprises, choose your contractor and make certain the name and address of his company are written on the contract. The beginning and end dates of this work, as well as evidence of this contractor's liability insurance and also the technical details of the job to be completed, should also be included. No contractor should need a down payment before work starts. To avoid the inconvenience that might cause unforeseen expenses, take a look at the AsphaltFort Payne site. You will thus have the resources in hand to successfully complete your asphalt paving project.

Asphalt Fort Payne - Best Alabama at Alabama!

For caliber asphalting perform , call on Asphalt, Fort Payne specialist team. We've got over twenty years of expertise in asphalt laying, resurfacing, maintenance and repair. Confirm our Business department to figure out the regions served.

Tar And Chip Paving Fort Payne | Parking Lot Repair And Striping Fort Payne
Home >> alabama/fort payne >> asphalt
Share this...