Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt surface in Gardendale, Alabama


Tar And Chip Paving installed in an unstable surface could quickly lead to problems. There are 3 main choices for the Simple installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good shape and not showing severe cracks or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 aspect is height: make sure fences, garage flooring, and other constructions aren't compromised by the greater level of this surface.
  2. Eliminate old driveway, counter into the floor: The present driveway is completely eliminated (or you might not have a driveway yet) and 4 to 6 inches of hot paving stone is put right on the ground.
  3. Eliminate the old driveway and fasten it into a good surface. This is the preferred method. An aggregated stone flooring partly replaces part of this hot asphalt mix.

The more asphalt you operate, the more leeway you have. For instance, in 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. Generally, for lean asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you'll need to consult with your contractor. The hot mix remains functional in this period, but the time is constrained.

How much does an Tar And Chip Paving cost in Gardendale?

Take into account the weather vagaries of the climate when deciding upon the standard of asphalt. The significant temperature variations we experience cause appreciable damage to asphalt perform.

In addition, it'll be useful to distinguish the contractor should you have a recreational vehicle or a van. He might need to accommodate the asphalt mix so as to be more resistant to the burden of heavy vehicles.

The Benefits of Tar And Chip Paving

  • Smooth finish;
  • non-slip
  • easy to maintain
  • watertightness ensured
  • withstands the rigors of this Quebec climate very well (provided it's been installed optimally);
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the cost fluctuates based on the quality of the asphalt used and the paving contractor.

For a sustainable Tar And Chip Paving

The existence of an asphalt paver can be around 20 decades, when the very best states are satisfied. We are talking about a professional paving contractor, a good quality of asphalt and an optimal asphalt laying technique.


The longevity of residential asphalt paving largely depends upon the standard of the laying. Really, the major causes of deformation or ripping of an asphalt layer are the absence of compaction and a thin foundation. However, the maintenance of the asphalt sidewalk can be a deciding factor in its longevity. That is to say, you'll have to seal your driveway once in ten decades, at a minimum, in order to maintain its great state.


We advise you to inform your asphalting builder in case you choose to get your driveway asphalt so as to offer your property. It might not be essential to pay top dollar for laying asphalt , in this circumstance.

Tar And Chip Paving laying: cost and contract

The choice of the asphalt laying contractor is essential. In order to not have unpleasant surprises, you will have to choose it carefully.

Our guarantees and Tar And Chip Paving work

Guarantee that the paving contractor has liability insurance. A trip to the web site of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has been the subject of complaints.

The following details must be included in the contract:

- date of beginning and finish of the job;

- evidence of insurance;

- technical particulars;

- RBQ certification number.

You ought to be aware that a paving builder can't require you to make a down payment before work has started. But you should agree to the payment terms and make sure it's about the contract.

Prior to estimating the asphalt drive to your new home by a builder, or acquiring some fundamental knowledge is imperative to guarantee that the job is well done. Know first that the lack of compaction and the inadequate depth of the base are the two main causes of the deformation or ripping of a coating of asphalt. If it is a new driveway, it has to first be excavated to make room for a coating of crushed stone of sufficient depth. A geotextile membrane is going to be placed beneath the granular backfill if the dirt proves to be very loamy (clayey). If you own a new home, it is best to wait for 6 to 12 months before paving your drive, to enable the soil to settle naturally. In the event of a fix of this entrance, a simple replacement of the asphalt coating can be considered if the contractor believes that the existing base is sufficient. In both scenarios, base redone or base preserved, the duration of its warranty has to be the same.

Tar And Chip Paving Gardendale Alabama

The weather conditions in our lovely state may have a disastrous impact on an asphalt driveway, hence the importance of adding a slope with a minimum slope of 2%. This will enable water to drain into the street and decrease the risk of heaving or cracking. This significant detail has to be taken into account when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the builder before the start of the work: he will have the ability to supply materials so. Some asphalt combinations produce an asphalt which is more resistant to heavy-duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to reach a thickness of 5 cm (2 ) after being compacted. For optimal stability, the base should extend over the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also mention that the installation of side supports around the base is a good method to prevent possible cracks and this asphalting done in chilly weather is going to be of poor quality. It is therefore far better to wait for the bright days to return before beginning work.

To avoid unpleasant surprises, select your contractor and be sure that the name and address of his business are written on the contract. The beginning and end dates of this work, as well as proof of the contractor's liability insurance and the technical specifics of the job to be carried out, should also be included. No contractor should require a deposit before work begins. To prevent the inconvenience that might cause unforeseen expenses, visit the Tar And Chip PavingGardendale website. You may thus have all the resources in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Gardendale - Best Alabama in Alabama!

For caliber asphalting work , call on Tar And Chip Paving, Gardendale specialist team. We've got over twenty decades of expertise in asphalt laying, resurfacing, maintenance and repair. Confirm our Business department to find out the regions served.

Snow Removal Gardendale | Asphalt Gardendale
Home >> alabama/gardendale >> tar and chip paving
Share this...