Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Concrete Maintenance- Options for the asphalt Coating in Gulf Shores, Alabama


Concrete Maintenance installed in an unstable surface could quickly lead to difficulties. There are three Chief choices for the basic setup:

  1. Paving Over Existing Driveway: If your existing driveway is in good shape and not showing serious fractures or crumbling, hot asphalt mixture can be laid directly over your driveway. 1 aspect is height: make sure fences, garage floors, and other constructions aren't jeopardized by the greater degree of this surface.
  2. Remove old driveway, peg to the ground: The existing driveway is completely eliminated (or you may not have a driveway yet) and 4 to 6 inches of warm paving stone is placed right on the ground.
  3. Eliminate the old driveway and fasten it to a solid surface. This is actually the preferred method. An aggregated stone flooring partially replaces part of this hot asphalt mixture. Typically 6 to 8 inches of limestone extends under 3 inches of asphalt.

Our Services:

The best time to install Concrete Maintenance from Gulf Shores

The more asphalt you work, the more leeway you might have. By way of example, in 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. In general, for lean asphalt applications (approximately 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to consult with your contractor. The hot mix is ​​still functional in this period of time, however, the time is limited.

How much can an Concrete Maintenance price in Gulf Shores?

Consider the weather vagaries of our climate when deciding upon the standard of asphalt. The substantial temperature variations we experience cause considerable damage to asphalt work.

Furthermore, it'll be good to distinguish the contractor if you have a recreational vehicle or even a van. He might have to adapt the asphalt mix so as to be more immune to the burden of heavy vehicles.

The advantages of Concrete Maintenance

A driveway paved with asphalt has several advantages:

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the quality of the asphalt employed and the paving contractor.

For a sustainable Concrete Maintenance

The existence of an asphalt paver may be up to 20 decades, when the very best states are met. We're talking about a professional paving builder, a great grade of asphalt and an optimal asphalt laying technique.


The durability of residential asphalt paving chiefly is dependent upon the quality of the laying. Really, the significant causes of deformation or ripping of an asphalt coating are the lack of compaction plus a lean base. On the other hand, the maintenance of the asphalt sidewalk is also a deciding factor in its longevity. That's to say, you'll need to seal your driveway once in 10 years, at a minimum, in order to maintain its great condition.


We advise you to inform your asphalting builder in case you choose to have your driveway asphalt so as to offer your property. It might not be necessary to pay top dollar for placing asphalt , in such a case.

Concrete Maintenance placing: price and contract

The choice of the asphalt laying builder is indispensable. In order not to have unpleasant surprises, then you'll need to select it carefully.

Our ensures and Concrete Maintenance work

Make sure the paving contractor has liability insurance. A visit to the web site of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has ever become the subject of complaints.

These details should be included in the arrangement:

- date of start and finish of the job;

- evidence of insurance;

- technical details;

- RBQ certification number.

You should be aware that a Concrete Maintenance builder can't demand that you make a deposit before work has begun. However, you need to agree on the payment terms and make sure it's about the contract.

A solid base for Concrete Maintenance- Gulf Shores

Before redoing the Concrete Maintenance drive to your new residence by a contractor, or obtaining some basic knowledge is vital to guarantee that the job is well done. Know first that the lack of compaction and the insufficient thickness of the foundation are the two main sources for the deformation or ripping of a layer of asphalt. If it is a new driveway, then it has to first be excavated to make room for a layer of crushed stone of adequate depth. A geotextile membrane is going to be placed beneath the granular backfill if the soil proves to be very loamy (clayey). If you own a new home, it is ideal to wait for 6 to 12 months prior to paving your driveway, to enable the dirt to settle . In the event of a fix of the entrance, a simple replacement of the Concrete Maintenance coating can be considered in the event the contractor considers that the present base is adequate. In both scenarios, foundation redone or base maintained, the duration of its guarantee must be exactly the same.

Concrete Maintenance Gulf Shores Alabama

The weather conditions in our lovely state can have a disastrous impact on an asphalt driveway, hence the importance of including a slope having a minimum slope of 2%. This will allow water to drain to the road and decrease the risk of heaving or cracking. This significant detail must be taken into consideration when excavating and maintained during backfilling.

If you have a van or recreational vehicle, notify the builder before the start of the work: he is going to have the ability to supply materials accordingly. Some asphalt combinations produce an asphalt that is more immune to heavy-duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to reach a thickness of 5 cm (2 in) after being compacted. For optimal stability, the base should extend over the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also mention that the installation of unwanted supports around the foundation is a fantastic way to avoid potential cracks and this Concrete Maintenance done in cold weather is going to be of poor quality. It's therefore better to wait for the sunny days to return before starting work.

A definite contract with your builder in Gulf Shores

To avoid unpleasant surprises, select your contractor and be certain that the name and address of the company are composed about the contract. The beginning and finish dates of this work, as well as evidence of the builder's liability insurance and also the technical specifics of this job to be carried out, should also be included. No contractor should require a deposit before work starts. To avoid the inconvenience that might lead to unforeseen expenses, take a look at the Concrete MaintenanceGulf Shores website. You will thus have all the tools in hand to successfully finish your Concrete Maintenance project.

Concrete Maintenance Gulf Shores - Best Alabama in Alabama!

For caliber asphalting perform , call on Concrete Maintenance, Gulf Shores specialist team. We've got more than twenty years of experience in asphalt laying, resurfacing, maintenance and repair. Consult our Business section to figure out the regions served.

Parking Lot Repair And Striping Gulf Shores | Snow Removal Gulf Shores
Home >> alabama/gulf shores >> concrete maintenance
Share this...