Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt Coating in Homewood, Alabama


Tar And Chip Paving installed in an unstable surface can quickly lead to difficulties. There are three main options for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not showing severe fractures or crumbling, hot asphalt mix can be laid directly over your driveway. One aspect is elevation: make certain fences, garage flooring, and other constructions aren't jeopardized by the greater level of the new surface.
  2. Eliminate old driveway, peg to the floor: The present driveway is completely eliminated (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed right on the ground.
  3. Remove the old driveway and fasten it to a solid surface. This is actually the preferred method. An aggregated stone floor partially replaces part of the hot asphalt mixture. Typically 6 to 8 inches of aggregate goes under 3 inches of asphalt.

The more asphalt you operate, the more leeway you might have. By way of example, in 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. In general, for thin asphalt programs (about 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you ought to consult with your contractor. The hot mix remains practical during this period, but the time is constrained.

How much can an Tar And Chip Paving cost in Homewood?

Consider the weather vagaries of the climate when deciding upon the quality of asphalt. The substantial temperature variations that we experience cause considerable damage to asphalt work.

In addition, it will be useful to tell the contractor if you have a recreational vehicle or a van. He will need to accommodate the asphalt mix so as to be more resistant to the burden of heavy vehicles.

The advantages of Tar And Chip Paving

  • Smooth end;
  • non-slip
  • easy to Keep
  • watertightness guaranteed
  • withstands the rigors of this Quebec climate very well (provided it's been installed optimally);
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt used along with the paving contractor.

For a sustainable Tar And Chip Paving

The existence of an asphalt paver can be around 20 years, when the best states are met. We are talking about a professional paving builder, a great quality of asphalt and an optimal asphalt laying technique.

Tar And Chip Paving in Homewood: price, quality of work and lifespan


The durability of residential asphalt paving largely is dependent on the quality of the placing. Really, the significant causes of deformation or ripping of an asphalt coating are the lack of compaction and a lean base. On the other hand, the maintenance of the asphalt pavement is also a determining factor in its longevity. That is to say, you will have to seal your driveway once in 10 years, at a minimum, in order to maintain its good condition.


We suggest that you notify your asphalting builder if you decide to have your driveway asphalt so as to offer your property. It might not be necessary to pay top dollar for placing asphalt , in this case.

Tar And Chip Paving laying: price and contract

The option of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, you will have to select it carefully.

Guarantee that the paving contractor has liability insurance coverage. A visit to the web site of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has been the subject of complaints.

The following details should be included in the arrangement:

- date of beginning and finish of the job;

- proof of insurance;

- technical particulars;

- RBQ accreditation number.

You should know that a paving builder cannot demand you to make a deposit before work has started. However, you need to agree on the payment terms and make sure it is on the contract.

A strong foundation for Tar And Chip Paving- Homewood

Before redoing the asphalt driveway to your new home by a contractor, or acquiring some basic knowledge is vital to make sure the job is done. Know first that the absence of compaction and the inadequate thickness of the foundation are the two chief causes of the deformation or tearing of a coating of asphalt. When it's a new driveway, then it has to initially be excavated to make room for a coating of crushed stone of sufficient thickness. A geotextile membrane will be placed under the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you have a new home, it is ideal to wait for 6 to 12 months prior to paving your driveway, to enable the dirt to settle . In the event of a fix of this entrance, an easy replacement of the asphalt layer can be considered in the event the contractor considers that the existing base is sufficient. In both cases, foundation redone or foundation maintained, the whole period of its guarantee must be exactly the same.

Tar And Chip Paving Homewood Alabama

The weather conditions in our lovely state can have a disastrous impact on an asphalt drive, thus the importance of including a slope with a minimum slope of 2%. This will allow water to drain to the street and minimize the danger of heaving or cracking. This significant detail has to be taken into account when excavating and maintained during backfilling.

If you have a van or recreational vehicle, notify the builder before the onset of the work: he is going to have the ability to supply materials so. Some asphalt combinations produce an asphalt that is more resistant to heavy duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to reach a thickness of 5 cm (2 ) after being compacted. For optimum stability, the foundation should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also mention that the setup of unwanted supports around the foundation is a good method to avoid possible cracks and that asphalting done in chilly weather will be of inferior quality. It is therefore better to await the bright days to return before beginning work.

A Tar And Chip Paving contract with your contractor in Homewood

To avoid unpleasant surprises, then select your contractor and make certain that the name and address of the business are composed on the contract. The beginning and finish dates of this job, in addition to evidence of this builder's liability insurance and also the technical details of this job to be completed, should also be included. No contractor should require a deposit before work begins. To prevent the inconvenience that might cause unforeseen expenses, take a look at the Tar And Chip PavingHomewood site. You may thus have the tools in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Homewood - Best Alabama at Alabama!

For quality asphalting perform , call on Tar And Chip Paving, Homewood professional team. We have more than twenty years of experience in asphalt laying, resurfacing, maintenance and repair. Consult our Company section to find out the regions served.

Snow Removal Homewood | Asphalt Homewood
Home >> alabama/homewood >> tar and chip paving
Share this...