Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt Coating in Jacksonville, Alabama


Tar And Chip Paving installed in an unstable surface could quickly lead to problems. There are three main options for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good condition and not revealing severe cracks or crumbling, hot asphalt mix can be laid directly over your driveway. One facet is height: make sure fences, garage floors, and other structures aren't jeopardized by the higher degree of the new surface.
  2. Eliminate old driveway, peg to the floor: The existing driveway is totally eliminated (or you may not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is put right on the ground.
  3. Remove the old driveway and secure it into a solid surface. This is actually the preferred method. An aggregated stone flooring partly replaces part of this hot asphalt mixture.

The more asphalt you work, the more leeway you have. For instance, at 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. Generally, for thin asphalt applications (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to speak to your contractor. The hot mix is ​​still practical in this period of time, but the time is constrained.

How much does an Tar And Chip Paving cost in Jacksonville?

Take into account the weather vagaries of the climate when deciding upon the standard of asphalt. The significant temperature variations that we experience cause appreciable damage to asphalt work.

Furthermore, it will be useful to distinguish the contractor should you own a recreational vehicle or a van. He might have to accommodate the asphalt mix in order to be more immune to the weight of heavy vehicles.

The advantages of Tar And Chip Paving

A driveway paved with asphalt has several benefits:

It'll cost you between $ 3 and $11 per square foot; the price fluctuates based on the quality of the asphalt used along with the paving contractor.

For a sustainable Tar And Chip Paving

The existence of an asphalt paver may be around 20 decades, when the best states are met. We are talking about a professional paving contractor, a good quality of asphalt and an optimal asphalt laying technique.

Tar And Chip Paving in Jacksonville: price, quality of work and lifespan


The durability of residential asphalt paving chiefly depends on the quality of the placing. Really, the major causes of deformation or tearing of an asphalt layer are the absence of compaction plus a lean base. However, the upkeep of the asphalt pavement is also a deciding factor in its longevity. That is to say, you will need to seal your drive once in 10 years, at a minimum, so as to maintain its good state.


We advise you to notify your asphalting builder if you choose to get your driveway asphalt so as to sell your property. It might not be essential to pay top dollar for laying asphalt , in such a circumstance.

Tar And Chip Paving placing: cost and contract

The choice of the asphalt laying contractor is essential. In order not to have unpleasant surprises, then you'll need to choose it carefully.

Guarantee that the paving contractor has liability insurance coverage. A trip to the web site of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has ever become the subject of complaints.

The following details must be included in the contract:

- date of start and end of the job;

- proof of insurance;

- technical particulars;

- RBQ accreditation number.

You ought to know that a paving contractor cannot demand you to make a down payment before work has begun. However, you need to agree to the payment terms and be sure it is about the contract.

A solid foundation for Tar And Chip Paving- Jacksonville

Prior to estimating the asphalt driveway to your new residence by a builder, or obtaining some basic knowledge is imperative to guarantee that the job is done. Know first that the absence of compaction and the insufficient thickness of the foundation are the two main causes of the deformation or ripping of a coating of asphalt. When it's a new driveway, then it has to initially be excavated to make room for a coating of crushed stone of sufficient thickness. A geotextile membrane will be set under the granular backfill if the dirt proves to be somewhat loamy (clayey). If you have a new home, it is ideal to wait for 6 to 12 months before paving your driveway, to allow the soil to settle naturally. In the event of a fix of this entrance, an easy replacement of the asphalt coating can be considered if the contractor considers that the present base is sufficient. In both scenarios, foundation redone or foundation maintained, the whole period of its guarantee must be exactly the same.

Tar And Chip Paving Jacksonville Alabama

The weather conditions in our lovely state may have a disastrous impact on an asphalt drive, thus the significance of adding a slope with a minimum slope of 2%. This will enable water to drain to the street and decrease the risk of heaving or cracking. This important detail has to be taken into consideration when excavating and maintained during backfilling.

In case you have a van or recreational vehicle, notify the builder before the start of the work: he will be able to provide materials so. Some asphalt combinations produce an asphalt that is more immune to heavy duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to reach a thickness of at least 5 cm (2 ) after being compacted. For optimal stability, the base should extend over the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also note that the setup of side supports around the foundation is a good way to prevent potential cracks and this asphalting done in chilly weather will be of inferior quality. It's therefore better to await the bright days to return before starting work.

To avoid unpleasant surprises, then select your contractor diligently and make sure the name and address of the business are written about the contract. The start and end dates of this work, in addition to evidence of this contractor's liability insurance and also the technical details of this project to be carried out, should also be included. No contractor should require a deposit before work begins. To avoid the inconvenience that could cause unforeseen expenses, take a look at the Tar And Chip PavingJacksonville site. You will thus have the resources in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Jacksonville - Greatest Alabama in Alabama!

For caliber asphalting work , phone on Tar And Chip Paving, Jacksonville professional team. We have over 20 decades of expertise in asphalt laying, resurfacing, maintenance and repair. Consult our Company section to figure out the regions served.

Snow Removal Jacksonville | Asphalt Jacksonville
Home >> alabama/jacksonville >> tar and chip paving
Share this...