Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt surface in Leeds, Alabama


Tar And Chip Paving installed on an unstable surface could quickly lead to problems. There are three Chief choices for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not revealing serious fractures or crumbling, hot asphalt mix can be placed directly within your driveway. One facet is elevation: make sure fences, garage floors, and other constructions are not jeopardized by the greater level of this new surface.
  2. Eliminate old driveway, counter into the floor: The present driveway is completely removed (or you might not have a driveway yet) and 4 to 6 inches of hot paving stone is placed right on the ground.
  3. Eliminate the old driveway and secure it into a solid surface. This is actually the preferred method. An aggregated stone floor partly replaces part of this hot asphalt mix.

Our Services:

The best time to install Tar And Chip Paving from Leeds

The longer asphalt you operate, the more leeway you have. By way of example, at 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also raises: 46 minutes. Generally, for lean asphalt programs (about 1.5 cm), you should wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, then you'll need to consult with your contractor. The hot mix remains functional during this period of time, however, the time is limited.

How much does an Tar And Chip Paving price in Leeds?

Consider the weather vagaries of our climate when deciding upon the quality of asphalt. The substantial temperature variations that we experience cause considerable damage to asphalt work.

In addition, it'll be useful to distinguish the contractor if you have a recreational vehicle or even a van. He might need to adapt the asphalt mix so as to be more resistant to the burden of heavy vehicles.

The advantages of Tar And Chip Paving

A driveway paved with asphalt has several advantages:

It will cost you between $ 3 and $11 per square foot; the cost varies depending on the characteristic of the asphalt used and the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver may be up to 20 decades, when the very best conditions are satisfied. We are talking about a professional paving builder, a great quality of asphalt as well as an optimal asphalt laying technique.


The longevity of residential asphalt paving chiefly is dependent upon the standard of the laying. Indeed, the major causes of deformation or ripping of an asphalt coating are the absence of compaction plus a thin foundation. However, the maintenance of the asphalt pavement is also a deciding factor in its own longevity. That's to say, you'll need to seal your driveway once in ten years, at a minimum, in order to maintain its great condition.


We advise you to inform your asphalting contractor if you decide to get your driveway asphalt so as to offer your property. It might not be essential to pay top dollar for laying asphalt , in this circumstance.

Tar And Chip Paving placing: price and contract

The option of the asphalt laying builder is essential. In order not to have unpleasant surprises, then you'll need to choose it carefully.

Our guarantees and Tar And Chip Paving work

Guarantee that the paving contractor has liability insurance. A trip to the website of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has become the subject of complaints.

These details should be included in the arrangement:

- date of start and end of the job;

- proof of insurance;

- technical details;

- RBQ accreditation number.

You should know that a paving builder cannot require that you make a down payment before work has begun. However, you should agree to the payment terms and make sure it is about the contract.

A strong base for Tar And Chip Paving- Leeds

Prior to estimating the asphalt driveway to your new home by a contractor, or acquiring some basic knowledge is vital to make sure the job is well done. Know first that the absence of compaction and the inadequate depth of the foundation are the two chief causes of the deformation or ripping of a coating of asphalt. If it is a new driveway, it has to first be excavated to make room for a layer of crushed stone of adequate depth. A geotextile membrane is going to be placed under the granular backfill if the soil proves to be very loamy (clayey). If you have a new house, it is best to wait for 6 to 12 months prior to paving your drive, to enable the dirt to settle naturally. In the event of a repair of the entry, a simple replacement of the asphalt coating can be considered if the contractor believes that the present base is sufficient. In both scenarios, foundation redone or base maintained, the whole period of its guarantee must be exactly the same.

Tar And Chip Paving Leeds Alabama

The weather conditions in our beautiful province may have a disastrous impact in an asphalt drive, thus the importance of adding a slope having a minimum slope of 2%. This will allow water to drain to the road and minimize the risk of heaving or cracking. This significant detail has to be taken into consideration when excavating and maintained during backfilling.

If you have a van or recreational vehicle, notify the builder prior to the onset of the job: he will be able to supply materials accordingly. Some asphalt mixtures produce an asphalt which is more immune to heavy-duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of 5 cm (2 ) after being compacted. For optimum stability, the base should extend over the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also mention that the installation of unwanted supports around the base is a fantastic method to avoid possible cracks and that asphalting done in chilly weather will be of poor quality. It's therefore far better to await the sunny days to go back before beginning work.

A Tar And Chip Paving contract with your builder in Leeds

To avoid unpleasant surprises, then select your contractor and be sure that the title and address of the business are written about the contract. The beginning and finish dates of the job, in addition to evidence of this contractor's liability insurance and the technical details of this project to be completed, should also be included. No contractor should require a down payment before work starts. To avoid the inconvenience that could cause unforeseen costs, visit the Tar And Chip PavingLeeds website. You will thus have the tools in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Leeds - Greatest Alabama in Alabama!

For quality asphalting perform , phone on Tar And Chip Paving, Leeds specialist team. We have more than 20 decades of experience in asphalt laying, resurfacing, maintenance and repair. Confirm our Business section to figure out the regions served.

Snow Removal Leeds | Asphalt Leeds
Home >> alabama/leeds >> tar and chip paving
Share this...