Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Alternatives for the asphalt surface in Millbrook, Alabama


Asphalt installed on an unstable surface could quickly lead to problems. There are 3 main options for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good condition rather than showing severe fractures or crumbling, hot asphalt mix can be laid directly over your driveway. 1 aspect is height: make certain fences, garage floors, and other constructions are not jeopardized by the higher level of the new surface.
  2. Eliminate old driveway, peg to the ground: The present driveway is totally eliminated (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed right on the ground.
  3. Eliminate the old driveway and secure it to a good surface. This is actually the preferred method. An aggregated stone flooring partially replaces part of this hot asphalt mix.

The longer asphalt you work, the more leeway you have. For example, in 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also increases: 46 minutes. In general, for lean asphalt applications (approximately 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you'll need to speak to your contractor. The hot mix remains functional during this period, however, the time is limited.

How much does an Asphalt cost in Millbrook?

Consider the weather vagaries of our climate when deciding upon the standard of asphalt. The significant temperature variations we experience cause considerable damage to asphalt work.

Furthermore, it will be useful to tell the contractor if you own a recreational vehicle or a van. He might have to adapt the asphalt mixture in order to be more resistant to the weight of heavy vehicles.

The Benefits of Asphalt

  • Smooth end;
  • non invasive
  • Simple to Keep
  • watertightness ensured
  • withstands the rigors of the Quebec climate quite well (provided it's been set up optimally);
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the quality of the asphalt employed and the paving contractor.

For a sustainable Asphalt

The existence of an asphalt paver may be up to 20 years, when the very best conditions are met. We are referring to a professional paving builder, a great quality of asphalt and also an optimal asphalt laying technique.


The longevity of residential asphalt paving largely depends on the quality of the laying. Really, the significant causes of deformation or ripping of an asphalt coating are the lack of compaction plus a thin foundation. On the other hand, the maintenance of the asphalt pavement can be a deciding factor in its longevity. That's to say, you will need to seal your drive once in ten years, at a minimum, so as to maintain its great condition.


We advise you to notify your asphalting builder if you choose to have your driveway asphalt in order to sell your property. It may not be necessary to pay top dollar for laying asphalt , in this circumstance.

Asphalt placing: cost and contract

The option of the asphalt laying contractor is indispensable. In order to not have unpleasant surprises, you will need to choose it carefully.

Our guarantees and Asphalt work

Guarantee that the paving contractor has liability insurance. A trip to the website of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has been the subject of complaints.

These details must be included in the contract:

- date of beginning and finish of the work;

- proof of insurance;

- technical particulars;

- RBQ accreditation number.

You ought to know that a paving contractor can't require you to make a deposit before work has started. But you need to agree on the payment provisions and be sure it is on the contract.

A strong foundation for Asphalt- Millbrook

Before redoing the asphalt drive to your new home by a builder, or obtaining some fundamental knowledge is imperative to make sure the job is done. Know first that the absence of compaction and the inadequate thickness of the foundation are the two main causes of the deformation or tearing of a layer of asphalt. If it is a new driveway, it has to initially be excavated to make room for a coating of crushed stone of sufficient depth. A geotextile membrane will be placed under the granular backfill if the soil proves to be very loamy (clayey). If you own a new home, it is best to wait 6 to 12 months before paving your drive, to allow the soil to settle . In the case of a fix of this entry, a simple replacement of the asphalt coating can be considered in the event the contractor considers that the existing base is adequate. In both scenarios, base redone or foundation maintained, the duration of its warranty must be exactly the same.

Asphalt Millbrook Alabama

The weather conditions in our beautiful province can have a devastating effect on an asphalt driveway, hence the significance of adding a slope having a minimum slope of 2%. This will enable water to drain into the road and decrease the risk of heaving or cracking. This important detail has to be taken into account when excavating and maintained during backfilling.

If you have a van or recreational vehicle, notify the contractor before the start of the job: he is going to have the ability to provide materials so. Some asphalt mixtures produce an asphalt which is more resistant to heavy-duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) so as to accomplish a thickness of 5 cm (2 in) after being compacted. For optimal stability, the base should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also note that the setup of unwanted supports around the foundation is a fantastic way to avoid potential cracks and that asphalting done in cold weather will be of inferior quality. It's therefore better to await the bright days to return before beginning work.

To avoid unpleasant surprises, then choose your contractor diligently and be certain that the title and address of the company are written on the contract. The start and finish dates of this job, as well as proof of this builder's liability insurance and the technical specifics of this project to be carried out, should also be included. No contractor should require a down payment before work starts. To prevent the inconvenience that could cause unforeseen costs, visit the AsphaltMillbrook website. You may thus have all the resources in hand to successfully complete your asphalt paving project.

Asphalt Millbrook - Best Alabama in Alabama!

For quality asphalting work , call on Asphalt, Millbrook professional team. We have over twenty years of experience in asphalt laying, resurfacing, maintenance and repair. Consult our Company department to find out the regions served.

Tar And Chip Paving Millbrook | Parking Lot Repair And Striping Millbrook
Home >> alabama/millbrook >> asphalt
Share this...