Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Concrete Maintenance- Options for the asphalt Coating in Millbrook, Alabama


Concrete Maintenance installed on an unstable surface can quickly lead to difficulties. There are three Chief choices for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape rather than revealing severe cracks or crumbling, hot asphalt mixture can be placed directly within your driveway. One facet is elevation: make sure fences, garage floors, and other constructions aren't jeopardized by the greater level of the new surface.
  2. Remove old driveway, peg to the floor: The existing driveway is completely removed (or you may not have a driveway yet) and 4 to 6 inches of hot paving stone is put right on the ground.
  3. Eliminate the old driveway and secure it to a solid surface. This is the preferred method. An aggregated stone flooring partly replaces part of this hot asphalt mixture.

The longer asphalt you operate, the more leeway you have. For instance, in 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. Generally, for lean asphalt applications (about 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to consult with your contractor. The hot mix remains functional during this period, but the time is constrained.

How much can an Concrete Maintenance cost in Millbrook?

Consider the weather vagaries of our climate when deciding upon the quality of asphalt. The substantial temperature variations that we experience cause considerable damage to asphalt work.

Furthermore, it'll be useful to tell the contractor should you own a recreational vehicle or a van. He might have to adapt the asphalt mixture in order to be more resistant to the weight of heavy vehicles.

The Benefits of Concrete Maintenance

  • Smooth finish;
  • non invasive
  • Simple to maintain
  • watertightness guaranteed
  • withstands the rigors of this Quebec climate very well (provided it's been installed );
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost fluctuates based on the characteristic of the asphalt used and the paving contractor.

For a sustainable Concrete Maintenance

The existence of an asphalt paver may be around 20 years, when the very best conditions are met. We are referring to a professional paving builder, a good grade of asphalt as well as also an optimal asphalt laying technique.


The durability of residential asphalt paving largely is dependent on the standard of the laying. Indeed, the major causes of deformation or ripping of an asphalt coating are the lack of compaction and a lean base. However, the upkeep of the asphalt sidewalk can be a determining factor in its longevity. That is to say, you will have to seal your driveway once in 10 decades, at a minimum, so as to maintain its great condition.


We suggest that you notify your asphalting contractor if you choose to have your driveway asphalt so as to sell your property. It may not be essential to pay top dollar for placing asphalt , in this case.

Concrete Maintenance placing: cost and contract

The choice of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, you'll have to choose it carefully.

Make sure the paving contractor has liability insurance. A visit to the web site of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has ever been the subject of complaints.

The following details should be included in the arrangement:

- date of beginning and finish of the job;

- evidence of insurance;

- technical particulars;

- RBQ accreditation number.

You should know that a Concrete Maintenance builder cannot require that you make a deposit before work has begun. But you need to agree to the payment terms and make sure it is about the contract.

Before redoing the Concrete Maintenance drive to your new home by a builder, or obtaining some basic knowledge is vital to guarantee that the job is well done. Know first that the lack of compaction and the insufficient thickness of the foundation are the two main causes of the deformation or tearing of a coating of asphalt. If it is a new driveway, it has to first be excavated to make room for a layer of crushed stone of adequate depth. A geotextile membrane is going to be set beneath the granular backfill if the soil proves to be very loamy (clayey). If you have a new home, it is ideal to wait for 6 to 12 months before paving your drive, to enable the soil to settle naturally. In the event of a fix of this entrance, an easy replacement of the Concrete Maintenance layer can be considered if the contractor believes that the existing base is adequate. In both cases, foundation redone or foundation preserved, the duration of its guarantee must be the same.

Concrete Maintenance Millbrook Alabama

The weather conditions in our beautiful province may have a disastrous impact in an asphalt driveway, hence the significance of including a slope having a minimum slope of 2%. This will allow water to drain to the street and minimize the danger of heaving or cracking. This important detail has to be taken into consideration when excavating and maintained during backfilling.

If you've got a van or recreational vehicle, notify the contractor prior to the start of the work: he will have the ability to provide materials so. Some asphalt mixtures produce an asphalt which is more resistant to heavy-duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to reach a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the foundation should extend over the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also mention that the installation of side supports around the foundation is a good way to avoid potential cracks and that Concrete Maintenance done in cold weather is going to be of poor quality. It is therefore better to wait for the bright days to return before beginning work.

To avoid unpleasant surprises, choose your contractor diligently and make certain the name and address of the business are composed about the contract. The start and finish dates of the work, as well as evidence of the contractor's liability insurance and the technical specifics of the job to be carried out, should also be included. No contractor should need a down payment before work begins. To avoid the inconvenience that could cause unforeseen costs, visit the Concrete MaintenanceMillbrook site. You may thus have all the resources in hand to successfully complete your Concrete Maintenance project.

Concrete Maintenance Millbrook - Best Alabama at Alabama!

For caliber asphalting work , call on Concrete Maintenance, Millbrook specialist team. Consult our Company section to find out the regions served.

Parking Lot Repair And Striping Millbrook | Snow Removal Millbrook
Home >> alabama/millbrook >> concrete maintenance
Share this...