Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt Coating in Mobile, Alabama


Tar And Chip Paving installed in an unstable surface could quickly lead to difficulties. There are 3 Chief choices for the Simple installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition rather than revealing serious fractures or crumbling, hot asphalt mix can be placed directly within your driveway. One facet is elevation: make sure fences, garage flooring, and other structures are not compromised by the higher degree of the surface.
  2. Remove old driveway, peg to the ground: The existing driveway is totally eliminated (or you may not have a driveway yet) and 4 to 6 inches of warm paving stone is placed directly on the ground.
  3. Eliminate the old driveway and fasten it to a good surface. This is actually the preferred method. An aggregated stone flooring partly replaces part of this hot asphalt mix. Generally 6 to 8 inches of aggregate goes under 3 inches of asphalt.

Our Services:

The best time to install Tar And Chip Paving in Mobile

The longer asphalt you operate, the more leeway you might have. By way of example, in 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. In general, for lean asphalt applications (about 1.5 cm), you should wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you ought to speak to your contractor. The hot mix remains functional during this period, however, the time is constrained.

How much can an Tar And Chip Paving cost in Mobile?

Consider the weather vagaries of our climate when choosing the quality of asphalt. The significant temperature variations we experience cause appreciable damage to asphalt perform.

Furthermore, it'll be useful to distinguish the contractor should you own a recreational vehicle or a van. He might have to accommodate the asphalt mix in order to be more resistant to the weight of heavy vehicles.

The Benefits of Tar And Chip Paving

  • Smooth end;
  • non-slip
  • easy to Keep
  • watertightness ensured
  • withstands the rigors of this Quebec climate quite well (provided it's been installed );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the cost fluctuates based on the characteristic of the asphalt used along with the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver may be around 20 decades, when the best conditions are met. We are talking about a professional paving builder, a good grade of asphalt and also an optimal asphalt laying technique.

Tar And Chip Paving in Mobile: price, quality of work and lifespan


The durability of residential asphalt paving chiefly is dependent on the quality of the laying. Really, the significant causes of deformation or ripping of an asphalt layer are the absence of compaction and a thin foundation. On the other hand, the maintenance of the asphalt sidewalk is also a determining factor in its longevity. That is to say, you will need to seal your drive once in ten decades, at a minimum, in order to keep its good condition.


We advise you to notify your asphalting builder if you choose to have your driveway asphalt so as to offer your property. It might not be necessary to pay top dollar for laying asphalt , in this circumstance.

Tar And Chip Paving laying: cost and contract

The choice of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, you will need to select it carefully.

Guarantee that the paving contractor has liability insurance coverage. A trip to the web site of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has been the subject of complaints.

The following details must be included in the contract:

- date of start and finish of the work;

- evidence of insurance;

- technical details;

- RBQ certification number.

You should be aware that a paving contractor cannot demand you to make a down payment before work has started. However, you need to agree to the payment terms and be sure it is about the contract.

A strong base for Tar And Chip Paving- Mobile

Before redoing the asphalt drive to your new home by a builder, or acquiring some fundamental knowledge is imperative to guarantee that the job is well done. Know first that the absence of compaction and the inadequate depth of the foundation are the two main causes of the deformation or ripping of a layer of asphalt. When it is a new driveway, then it has to initially be excavated to make room for a layer of crushed stone of sufficient depth. A geotextile membrane is going to be set under the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you own a new home, it is ideal to wait 6 to 12 months before paving your driveway, to enable the dirt to settle . In the event of a fix of this entrance, a simple replacement of the asphalt layer can be considered if the contractor considers that the present foundation is adequate. In both cases, base redone or base preserved, the whole period of its guarantee must be the same.

Tar And Chip Paving Mobile Alabama

The weather conditions in our beautiful province can have a disastrous impact in an asphalt driveway, hence the significance of adding a slope with a minimum slope of 2%. This will enable water to drain into the street and minimize the danger of heaving or cracking. This important detail has to be taken into account when excavating and maintained during backfilling.

In case you've got a van or recreational vehicle, notify the builder prior to the onset of the work: he will have the ability to supply materials so. Some asphalt mixtures produce an asphalt which is more immune to heavy-duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the base should extend across the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also mention that the setup of unwanted supports around the foundation is a good method to avoid possible cracks and that asphalting done in chilly weather will be of poor quality. It is therefore better to await the sunny days to return before starting work.

A definite contract with your contractor in Mobile

To avoid unpleasant surprises, then select your contractor diligently and be sure the name and address of the business are written on the contract. The beginning and finish dates of this work, in addition to proof of the builder's liability insurance and also the technical details of this project to be carried out, should also be included. No contractor should require a down payment before work starts. To avoid the inconvenience that might lead to unforeseen costs, visit the Tar And Chip PavingMobile website. You may thus have all the resources in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Mobile - Best Alabama at Alabama!

For quality asphalting perform , phone on Tar And Chip Paving, Mobile specialist team. Consult our Company department to figure out the regions served.

Snow Removal Mobile | Asphalt Mobile
Home >> alabama/mobile >> tar and chip paving
Share this...