Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt Coating in Montgomery, Alabama


Tar And Chip Paving installed on an unstable surface could quickly lead to difficulties. There are three Chief choices for the Simple installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good shape and not revealing severe cracks or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 facet is elevation: make certain fences, garage flooring, and other structures aren't jeopardized by the higher level of the new surface.
  2. Remove old driveway, counter into the floor: The existing driveway is totally eliminated (or you may not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is put right on the ground.
  3. Remove the old driveway and secure it to a solid surface. This is the preferred method. An aggregated stone flooring partly replaces part of the hot asphalt mix.

Our Services:

The best time to install Tar And Chip Paving from Montgomery

The longer asphalt you work, the more leeway you might have. By way of instance, at 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. Generally, for lean asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you ought to consult with your contractor. The hot mix remains practical during this period of time, however, the time is constrained.

How much can an Tar And Chip Paving cost in Montgomery?

Take into account the weather vagaries of the climate when deciding upon the standard of asphalt. The substantial temperature variations that we experience cause appreciable damage to asphalt work.

Furthermore, it'll be useful to distinguish the contractor should you have a recreational vehicle or a van. He might need to adapt the asphalt mixture so as to be more resistant to the weight of heavy vehicles.

The advantages of Tar And Chip Paving

A driveway paved with asphalt has several advantages:

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the quality of the asphalt used and the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver may be around 20 years, when the very best states are satisfied. We are referring to a professional paving contractor, a good quality of asphalt and an optimal asphalt laying technique.


The longevity of residential asphalt paving largely depends upon the quality of the placing. Indeed, the major causes of deformation or tearing of an asphalt layer are the absence of compaction plus a lean base. On the other hand, the maintenance of the asphalt sidewalk is also a deciding factor in its longevity. That's to say, you'll need to seal your driveway once in ten decades, at a minimum, so as to keep its good state.


We advise you to notify your asphalting contractor in case you choose to get your driveway asphalt in order to sell your property. It may not be essential to pay top dollar for placing asphalt , in this case.

Tar And Chip Paving laying: cost and contract

The option of the asphalt laying contractor is essential. In order to not have unpleasant surprises, then you will need to choose it carefully.

Our guarantees and Tar And Chip Paving work

Make sure the paving contractor has liability insurance. A visit to the website of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has ever become the subject of complaints.

These details must be included in the arrangement:

- date of beginning and end of the work;

- proof of insurance;

- technical particulars;

- RBQ certification number.

You should know that a paving contractor cannot demand that you make a deposit before work has started. But you should agree to the payment terms and make sure it is about the contract.

Before redoing the asphalt drive to your new residence by a contractor, or acquiring some basic knowledge is imperative to guarantee that the job is done. Know first that the lack of compaction and the inadequate thickness of the foundation are the two main causes of the deformation or tearing of a coating of asphalt. If it is a new driveway, then it has to first be excavated to make room for a layer of crushed stone of adequate thickness. A geotextile membrane is going to be set under the granular backfill if the dirt turns out to be very loamy (clayey). If you have a new home, it is ideal to wait 6 to 12 months prior to paving your driveway, to enable the dirt to settle naturally. In the event of a fix of the entrance, a simple replacement of the asphalt layer can be considered in the event the contractor considers that the existing foundation is adequate. In both scenarios, foundation redone or base preserved, the duration of its guarantee has to be exactly the same.

Tar And Chip Paving Montgomery Alabama

The weather conditions in our beautiful province may have a devastating effect on an asphalt driveway, hence the importance of adding a slope having a minimum slope of 2%. This will allow water to drain into the street and decrease the danger of heaving or cracking. This important detail has to be taken into consideration when excavating and maintained during backfilling.

In case you have a van or recreational vehicle, notify the builder prior to the onset of the work: he will be able to provide materials so. Some asphalt combinations produce an asphalt that is more immune to heavy duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to reach a thickness of 5 cm (2 ) after being compacted. For optimum stability, the foundation should extend over the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also mention that the setup of unwanted supports around the base is a good method to prevent potential cracks and this asphalting done in cold weather is going to be of inferior quality. It's therefore better to wait for the sunny days to return before starting work.

To avoid unpleasant surprises, choose your contractor and make certain that the name and address of his company are written on the contract. The start and finish dates of this job, as well as proof of the builder's liability insurance and also the technical specifics of this job to be carried out, should also be included. No contractor should need a deposit before work begins. To prevent the inconvenience that could cause unforeseen costs, take a look at the Tar And Chip PavingMontgomery website. You will thus have the tools in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Montgomery - Best Alabama in Alabama!

For caliber asphalting work , call on Tar And Chip Paving, Montgomery professional team. Consult our Company section to find out the regions served.

Snow Removal Montgomery | Asphalt Montgomery
Home >> alabama/montgomery >> tar and chip paving
Share this...