Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt Coating in Muscle Shoals, Alabama


Tar And Chip Paving installed in an unstable surface can quickly lead to difficulties. There are three Chief options for the Simple setup:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition rather than revealing serious fractures or crumbling, hot asphalt mix can be placed directly within your driveway. One facet is elevation: make sure fences, garage floors, and other structures aren't jeopardized by the higher level of this new surface.
  2. Eliminate old driveway, peg to the ground: The present driveway is completely removed (or you might not have a driveway nonetheless ) and 4 to 6 inches of warm paving stone is put directly on the ground.
  3. Remove the old driveway and fasten it into a good surface. This is actually the preferred method. An aggregated stone floor partially replaces part of the hot asphalt mixture. Typically 6 to 8 inches of limestone extends under 3 inches of asphalt.

Our Services:

The best time to install Tar And Chip Paving in Muscle Shoals

The longer asphalt you work, the more leeway you might have. For instance, in 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. Generally, for thin asphalt applications (about 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you'll need to speak to your contractor. The hot mix is ​​still functional in this period of time, however, the time is limited.

How much does an Tar And Chip Paving price in Muscle Shoals?

Take into account the weather vagaries of our climate when choosing the standard of asphalt. The significant temperature variations we experience cause considerable damage to asphalt perform.

Furthermore, it'll be good to distinguish the contractor if you own a recreational vehicle or a van. He will need to accommodate the asphalt mixture so as to be more resistant to the burden of heavy vehicles.

The advantages of Tar And Chip Paving

  • Smooth finish;
  • non-slip
  • easy to maintain
  • watertightness ensured
  • withstands the rigors of this Quebec climate quite well (provided it has been set up );
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the price varies depending on the quality of the asphalt used along with the paving contractor.

For a sustainable Tar And Chip Paving

The life of an asphalt paver can be up to 20 years, when the best conditions are met. We are talking about a professional paving builder, a good grade of asphalt as well as an optimal asphalt laying technique.


The durability of residential asphalt paving largely depends upon the quality of the placing. Indeed, the significant causes of deformation or tearing of an asphalt coating are the absence of compaction plus a thin foundation. However, the upkeep of the asphalt pavement can be a determining factor in its own longevity. That's to say, you will need to seal your drive once in 10 years, at a minimum, in order to maintain its good condition.


We advise you to inform your asphalting builder in case you choose to get your driveway asphalt so as to offer your property. It may not be necessary to pay top dollar for placing asphalt , in such a circumstance.

Tar And Chip Paving placing: cost and contract

The option of the asphalt laying contractor is essential. In order to not have unpleasant surprises, you'll have to select it carefully.

Guarantee that the paving contractor has liability insurance. A visit to the website of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has become the subject of complaints.

These details must be included in the contract:

- date of beginning and finish of the job;

- proof of insurance;

- technical particulars;

- RBQ certification number.

You should be aware that a paving builder can't demand that you make a down payment before work has started. But you should agree to the payment terms and make sure it is about the contract.

Prior to estimating the asphalt drive to your new residence by a contractor, or obtaining some basic knowledge is imperative to guarantee that the job is done. Know first that the lack of compaction and the insufficient thickness of the foundation are the two main causes of the deformation or tearing of a layer of asphalt. When it's a new driveway, then it has to first be excavated to make room for a layer of crushed stone of adequate thickness. A geotextile membrane will be placed under the granular backfill if the soil turns out to be somewhat loamy (clayey). If you own a new home, it is best to wait for 6 to 12 months before paving your driveway, to allow the soil to settle . In the case of a fix of this entry, a simple replacement of the asphalt layer can be considered in the event the contractor considers that the present foundation is adequate. In both scenarios, foundation redone or foundation maintained, the duration of its guarantee has to be the same.

Tar And Chip Paving Muscle Shoals Alabama

The weather conditions in our lovely state may have a devastating effect in an asphalt driveway, hence the importance of including a slope having a minimum slope of 2%. This will allow water to drain to the street and decrease the danger of heaving or cracking. This significant detail must be taken into account when excavating and preserved during backfilling.

If you have a van or recreational vehicle, notify the contractor before the onset of the job: he will have the ability to supply materials accordingly. Some asphalt combinations produce an asphalt that is more immune to heavy-duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) so as to reach a thickness of 5 cm (2 in) after being compacted. For optimum stability, the base should extend over the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also note that the installation of unwanted supports around the foundation is a good way to avoid possible cracks and this asphalting done in chilly weather is going to be of poor quality. It is therefore far better to await the sunny days to go back before starting work.

A definite contract with your contractor in Muscle Shoals

To avoid unpleasant surprises, select your contractor and be certain the name and address of his business are composed about the contract. The beginning and finish dates of this job, in addition to evidence of this builder's liability insurance and the technical specifics of this job to be carried out, should also be included. No contractor should need a deposit before work starts. To avoid the inconvenience that could lead to unforeseen expenses, take a look at the Tar And Chip PavingMuscle Shoals website. You will thus have the tools in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Muscle Shoals - Greatest Alabama in Alabama!

For caliber asphalting work , phone on Tar And Chip Paving, Muscle Shoals professional team. We've got more than twenty years of experience in asphalt laying, resurfacing, maintenance and repair. Consult our Company department to figure out the regions served.

Snow Removal Muscle Shoals | Asphalt Muscle Shoals
Home >> alabama/muscle shoals >> tar and chip paving
Share this...