Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt surface in Oxford, Alabama


Tar And Chip Paving installed in an unstable surface could quickly lead to problems. There are 3 Chief options for the basic installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition and not revealing severe fractures or crumbling, hot asphalt mix can be laid directly over your driveway. One aspect is height: make sure fences, garage flooring, and other structures aren't jeopardized by the higher level of this new surface.
  2. Eliminate old driveway, counter into the floor: The existing driveway is completely eliminated (or you might not have a driveway yet) and 4 to 6 inches of hot paving stone is put right on the ground.
  3. Remove the old driveway and fasten it to a solid surface. This is the preferred method. An aggregated stone floor partly replaces part of this hot asphalt mixture.

The more asphalt you work, the more leeway you might have. For instance, in 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also increases: 46 minutes. Generally, for thin asphalt applications (approximately 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to consult with your contractor. The hot mix is ​​still functional in this period of time, but the time is constrained.

How much does an Tar And Chip Paving price in Oxford?

Consider the weather vagaries of the climate when choosing the standard of asphalt. The significant temperature variations we experience cause appreciable damage to asphalt work.

In addition, it will be good to distinguish the contractor should you have a recreational vehicle or a van. He might need to accommodate the asphalt mix so as to be more resistant to the weight of heavy vehicles.

The Benefits of Tar And Chip Paving

A driveway paved with asphalt has several benefits:

It'll cost you between $ 3 and $11 per square foot; the cost fluctuates based on the quality of the asphalt employed along with the paving contractor.

To get a sustainable Tar And Chip Paving

The existence of an asphalt paver can be up to 20 years, when the very best conditions are satisfied. We're talking about a professional paving builder, a great grade of asphalt as well as also an optimal asphalt laying technique.


The longevity of residential asphalt paving chiefly is dependent on the standard of the laying. Indeed, the major causes of deformation or tearing of an asphalt layer are the lack of compaction plus a lean base. On the other hand, the upkeep of the asphalt sidewalk can be a determining factor in its own longevity. That is to say, you will have to seal your driveway once in ten decades, at a minimum, in order to maintain its great state.


We suggest that you inform your asphalting builder in case you choose to get your driveway asphalt so as to offer your property. It may not be necessary to pay top dollar for laying asphalt , in such a case.

Tar And Chip Paving laying: cost and contract

The choice of the asphalt laying builder is indispensable. In order not to have unpleasant surprises, then you'll have to choose it carefully.

Our ensures and Tar And Chip Paving work

Guarantee that the paving contractor has liability insurance coverage. A trip to the web site of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has become the subject of complaints.

The following details should be included in the arrangement:

- date of start and finish of the job;

- proof of insurance;

- technical particulars;

- RBQ certification number.

You should be aware that a paving contractor cannot require that you make a deposit before work has started. However, you need to agree on the payment provisions and make sure it's on the contract.

A strong base for Tar And Chip Paving- Oxford

Before redoing the asphalt driveway to your new residence by a contractor, or acquiring some fundamental knowledge is vital to guarantee that the job is well done. Know first that the lack of compaction and the inadequate depth of the foundation are the two main sources for the deformation or ripping of a coating of asphalt. When it's a new driveway, it must first be excavated to make room for a coating of crushed stone of sufficient thickness. A geotextile membrane is going to be set beneath the granular backfill if the soil turns out to be somewhat loamy (clayey). If you have a new house, it's ideal to wait 6 to 12 months prior to paving your driveway, to enable the dirt to settle naturally. In the event of a repair of this entry, an easy replacement of the asphalt layer can be considered if the contractor believes that the existing foundation is sufficient. In both cases, foundation redone or base preserved, the duration of its warranty must be the same.

Tar And Chip Paving Oxford Alabama

The weather conditions in our beautiful province may have a disastrous impact in an asphalt driveway, hence the significance of adding a slope having a minimum slope of 2%. This will enable water to drain into the road and decrease the risk of heaving or cracking. This important detail has to be taken into consideration when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the builder before the start of the work: he is going to have the ability to provide materials accordingly. Some asphalt combinations produce an asphalt that is more immune to heavy-duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to reach a thickness of at least 5 cm (2 in) after being compacted. For optimum stability, the base should extend across the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also note that the setup of side supports around the foundation is a good way to prevent potential cracks and this asphalting done in chilly weather is going to be of inferior quality. It's therefore far better to wait for the sunny days to return before beginning work.

A Tar And Chip Paving contract with your contractor in Oxford

To avoid unpleasant surprises, then choose your contractor and be sure the name and address of the business are composed about the contract. The beginning and end dates of the work, in addition to evidence of this contractor's liability insurance and also the technical specifics of this project to be carried out, should also be included. No contractor should need a down payment before work begins. To avoid the inconvenience that might lead to unforeseen costs, visit the Tar And Chip PavingOxford website. You may thus have the tools in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Oxford - Greatest Alabama in Alabama!

For quality asphalting work , call on Tar And Chip Paving, Oxford professional team. Confirm our Company department to figure out the regions served.

Snow Removal Oxford | Asphalt Oxford
Home >> alabama/oxford >> tar and chip paving
Share this...