Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Alternatives for the asphalt Coating in Pelham, Alabama


Asphalt installed on an unstable surface can quickly lead to problems. There are three main choices for the Simple setup:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not revealing serious cracks or crumbling, hot asphalt mixture can be placed directly within your driveway. One aspect is elevation: make certain fences, garage flooring, and other constructions aren't jeopardized by the higher level of this surface.
  2. Eliminate old driveway, counter into the floor: The present driveway is completely removed (or you might not have a driveway yet) and 4 to 6 inches of warm paving stone is placed right on the ground.
  3. Remove the old driveway and fasten it to a good surface. This is actually the preferred method. An aggregated stone flooring partially replaces part of this hot asphalt mixture. Typically 6 to 8 inches of limestone goes under 3 inches of asphalt.

The longer asphalt you operate, the more leeway you might have. For instance, at 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. In general, for lean asphalt applications (about 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you'll need to consult with your contractor. The hot mix is ​​still functional during this period, but the time is limited.

How much does an Asphalt price in Pelham?

Consider the weather vagaries of the climate when choosing the standard of asphalt. The substantial temperature variations we experience cause considerable damage to asphalt perform.

Furthermore, it'll be useful to tell the contractor should you own a recreational vehicle or a van. He might need to accommodate the asphalt mix in order to be more resistant to the weight of heavy vehicles.

The Benefits of Asphalt

  • Smooth end;
  • non-slip
  • Simple to Keep
  • watertightness guaranteed
  • withstands the rigors of this Quebec climate very well (provided it has been installed );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the cost fluctuates based on the quality of the asphalt used and the paving contractor.

To get a sustainable Asphalt

The life of an asphalt paver can be up to 20 years, when the very best states are satisfied. We're referring to a professional paving contractor, a good grade of asphalt and an optimal asphalt laying technique.


The durability of residential asphalt paving largely depends upon the quality of the laying. Really, the major causes of deformation or tearing of an asphalt layer are the lack of compaction and a lean base. On the other hand, the maintenance of the asphalt sidewalk can be a deciding factor in its own longevity. That is to say, you'll have to seal your drive once in ten years, at a minimum, in order to keep its great condition.


We advise you to notify your asphalting contractor in case you decide to have your driveway asphalt in order to sell your property. It may not be essential to pay top dollar for laying asphalt , in such a circumstance.

Asphalt laying: cost and contract

The choice of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, then you will have to select it carefully.

Our guarantees and Asphalt work

Make sure the paving contractor has liability insurance. A visit to the web site of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has ever become the subject of complaints.

The following details must be included in the arrangement:

- date of beginning and end of the work;

- proof of insurance;

- technical details;

- RBQ accreditation number.

You ought to know that a paving builder can't require you to make a down payment before work has started. But you need to agree on the payment provisions and be sure it is on the contract.

Before redoing the asphalt driveway to your new home by a contractor, or acquiring some basic knowledge is imperative to guarantee that the job is well done. Know first that the absence of compaction and the insufficient thickness of the foundation are the two main causes of the deformation or ripping of a layer of asphalt. If it is a new driveway, it has to initially be excavated to make room for a coating of crushed stone of sufficient thickness. A geotextile membrane is going to be placed beneath the granular backfill if the soil turns out to be somewhat loamy (clayey). If you own a new home, it is best to wait 6 to 12 months prior to paving your drive, to enable the dirt to settle . In the case of a fix of the entry, an easy replacement of the asphalt layer can be considered in the event the contractor believes that the present foundation is adequate. In both scenarios, foundation redone or base maintained, the whole period of its warranty has to be the same.

Asphalt Pelham Alabama

The weather conditions in our beautiful province can have a disastrous impact on an asphalt driveway, hence the importance of adding a slope having a minimum slope of 2%. This will allow water to drain into the street and decrease the danger of heaving or cracking. This significant detail must be taken into consideration when excavating and preserved during backfilling.

In case you have a van or recreational vehicle, notify the contractor prior to the start of the work: he will have the ability to provide materials accordingly. Some asphalt mixtures produce an asphalt that is more immune to heavy duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to reach a thickness of at least 5 cm (2 in) after being compacted. For optimal stability, the foundation should extend across the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also note that the setup of side supports around the foundation is a fantastic method to avoid possible cracks and this asphalting done in chilly weather is going to be of inferior quality. It is therefore better to wait for the bright days to return before beginning work.

To avoid unpleasant surprises, select your contractor and be sure that the name and address of his business are composed about the contract. The beginning and end dates of this job, in addition to proof of this contractor's liability insurance and also the technical specifics of the project to be completed, should also be included. No contractor should require a down payment before work starts. To prevent the inconvenience that could cause unforeseen expenses, visit the AsphaltPelham site. You may thus have all the resources in hand to successfully finish your asphalt paving project.

Asphalt Pelham - Greatest Alabama at Alabama!

For quality asphalting perform , call on Asphalt, Pelham professional team. We have more than twenty years of expertise in asphalt laying, resurfacing, maintenance and repair. Confirm our Business section to figure out the regions served.

Tar And Chip Paving Pelham | Parking Lot Repair And Striping Pelham
Home >> alabama/pelham >> asphalt
Share this...