Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Snow Removal- Options for the asphalt Coating in Phenix City, Alabama


Snow Removal installed in an unstable surface can quickly lead to difficulties. There are 3 Chief choices for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape rather than revealing severe fractures or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 aspect is elevation: make sure fences, garage floors, and other constructions are not jeopardized by the greater degree of the surface.
  2. Remove old driveway, counter into the floor: The present driveway is completely eliminated (or you might not have a driveway yet) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Remove the old driveway and fasten it into a solid surface. This is the preferred method. An aggregated stone flooring partly replaces part of the hot asphalt mixture. Generally 6 to 8 inches of limestone goes under 3 inches of asphalt.

The longer asphalt you operate, the more leeway you have. By way of example, in 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also raises: 46 minutes. Generally, for lean asphalt applications (about 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you'll need to speak to your contractor. The hot mix is ​​still practical during this period of time, but the time is limited.

How much does an Snow Removal cost in Phenix City?

Take into account the weather vagaries of the climate when choosing the standard of asphalt. The substantial temperature variations we experience cause considerable damage to asphalt work.

Furthermore, it'll be useful to distinguish the contractor should you own a recreational vehicle or even a van. He might need to accommodate the asphalt mixture so as to be more resistant to the weight of heavy vehicles.

The Benefits of Snow Removal

  • Smooth end;
  • non-slip
  • easy to Keep
  • watertightness ensured
  • withstands the rigors of the Quebec climate very well (provided it's been set up );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt used and the paving contractor.

For a sustainable Snow Removal

The life of an asphalt paver may be up to 20 years, when the best states are met. We are referring to a professional paving builder, a good grade of asphalt and an optimal asphalt laying technique.


The longevity of residential asphalt paving chiefly depends on the quality of the placing. Indeed, the major causes of deformation or ripping of an asphalt coating are the absence of compaction and a lean base. However, the upkeep of the asphalt pavement can be a determining factor in its longevity. That is to say, you'll have to seal your driveway once in ten decades, at a minimum, in order to keep its great condition.


We advise you to notify your asphalting builder if you decide to have your driveway asphalt so as to offer your property. It might not be essential to pay top dollar for placing asphalt , in such a case.

Snow Removal laying: cost and contract

The choice of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, you will have to choose it carefully.

Make sure the paving contractor has liability insurance coverage. A trip to the website of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has ever been the subject of complaints.

The following details must be included in the arrangement:

- date of beginning and end of the work;

- evidence of insurance;

- technical details;

- RBQ certification number.

You ought to know that a paving contractor can't require that you make a down payment before work has started. However, you should agree to the payment terms and make sure it is on the contract.

Before redoing the asphalt driveway to your new residence by a contractor, or acquiring some basic knowledge is imperative to guarantee that the job is done. Know first that the absence of compaction and the inadequate thickness of the base are the two main sources for the deformation or ripping of a coating of asphalt. If it is a new driveway, it has to first be excavated to make room for a layer of crushed stone of adequate thickness. A geotextile membrane will be placed under the granular backfill if the soil proves to be somewhat loamy (clayey). If you have a new home, it is best to wait 6 to 12 months prior to paving your drive, to enable the soil to settle . In the case of a fix of the entrance, a simple replacement of the asphalt coating can be considered in the event the contractor considers that the existing base is sufficient. In both cases, base redone or foundation maintained, the duration of its guarantee must be exactly the same.

Snow Removal Phenix City Alabama

The weather conditions in our beautiful province may have a devastating effect on an asphalt driveway, hence the importance of including a slope having a minimum slope of 2%. This will enable water to drain to the street and decrease the danger of heaving or cracking. This important detail must be taken into consideration when excavating and maintained during backfilling.

If you have a van or recreational vehicle, notify the contractor before the onset of the work: he will have the ability to provide materials so. Some asphalt combinations produce an asphalt which is more resistant to heavy duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimal stability, the base should extend across the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also mention that the setup of unwanted supports around the base is a fantastic method to avoid possible cracks and this asphalting done in cold weather is going to be of inferior quality. It's therefore far better to await the bright days to return before starting work.

To avoid unpleasant surprises, then select your contractor diligently and make sure that the title and address of his business are composed on the contract. The start and finish dates of this job, in addition to evidence of the contractor's liability insurance and also the technical specifics of the job to be completed, should also be included. No contractor should need a deposit before work starts. To avoid the inconvenience that might lead to unforeseen expenses, take a look at the Snow RemovalPhenix City site. You may thus have all the resources in hand to successfully complete your asphalt paving project.

Snow Removal Phenix City - Best Alabama at Alabama!

For caliber asphalting work , phone on Snow Removal, Phenix City professional team. Confirm our Company section to find out the regions served.

Concrete Maintenance Phenix City | Tar And Chip Paving Phenix City
Home >> alabama/phenix city >> snow removal
Share this...