Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt Coating in Pleasant Grove, Alabama


Asphalt installed on an unstable surface can quickly lead to difficulties. There are three Chief options for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not revealing severe fractures or crumbling, hot asphalt mix can be placed directly within your driveway. 1 facet is height: make certain fences, garage floors, and other constructions aren't jeopardized by the greater degree of the surface.
  2. Remove old driveway, peg to the floor: The existing driveway is completely removed (or you may not have a driveway nonetheless ) and 4 to 6 inches of warm paving stone is placed directly on the ground.
  3. Eliminate the old driveway and fasten it to a solid surface. This is the preferred method. An aggregated stone floor partially replaces part of this hot asphalt mix.

Our Services:

The best time to install Asphalt from Pleasant Grove

The longer asphalt you work, the more leeway you have. By way of example, at 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also raises: 46 minutes. In general, for thin asphalt applications (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you'll need to speak to your contractor. The hot mix remains practical during this period, but the time is limited.

How much can an Asphalt cost in Pleasant Grove?

Take into account the weather vagaries of our climate when choosing the quality of asphalt. The substantial temperature variations we experience cause appreciable damage to asphalt perform.

In addition, it'll be good to distinguish the contractor if you have a recreational vehicle or even a van. He might have to adapt the asphalt mixture in order to be more immune to the weight of heavy vehicles.

The advantages of Asphalt

  • Smooth end;
  • non invasive
  • easy to Keep
  • watertightness ensured
  • withstands the rigors of the Quebec climate very well (provided it's been set up optimally);
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the quality of the asphalt employed and the paving contractor.

For a sustainable Asphalt

The existence of an asphalt paver may be around 20 years, when the best conditions are met. We're referring to a professional paving contractor, a good grade of asphalt as well as also an optimal asphalt laying technique.

Asphalt in Pleasant Grove: price, quality of work and lifespan


The longevity of residential asphalt paving chiefly is dependent on the quality of the laying. Indeed, the major causes of deformation or ripping of an asphalt coating are the absence of compaction plus a lean base. On the other hand, the maintenance of the asphalt sidewalk is also a determining factor in its own longevity. That is to say, you will need to seal your driveway once in ten years, at a minimum, so as to keep its good condition.


We advise you to inform your asphalting builder in case you choose to have your driveway asphalt so as to sell your property. It might not be necessary to pay top dollar for placing asphalt , in such a circumstance.

Asphalt placing: price and contract

The option of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, you'll need to choose it carefully.

Guarantee that the paving contractor has liability insurance coverage. A visit to the website of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has ever been the subject of complaints.

The following details must be included in the contract:

- date of start and end of the job;

- proof of insurance;

- technical details;

- RBQ certification number.

You should be aware that a paving builder can't require that you make a down payment before work has begun. But you should agree on the payment provisions and be sure it is on the contract.

Before redoing the asphalt drive to your new residence by a builder, or obtaining some basic knowledge is vital to guarantee that the job is done. Know first that the lack of compaction and the insufficient depth of the foundation are the two main causes of the deformation or ripping of a layer of asphalt. If it is a new driveway, it has to first be excavated to make room for a layer of crushed stone of adequate thickness. A geotextile membrane will be set under the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you have a new home, it is best to wait 6 to 12 months before paving your driveway, to enable the soil to settle . In the case of a repair of this entrance, a simple replacement of the asphalt layer can be considered if the contractor believes that the present foundation is adequate. In both scenarios, foundation redone or foundation maintained, the duration of its guarantee must be the same.

Asphalt Pleasant Grove Alabama

The weather conditions in our lovely state can have a disastrous impact on an asphalt driveway, hence the importance of adding a slope having a minimum slope of 2%. This will allow water to drain into the road and minimize the risk of heaving or cracking. This significant detail must be taken into consideration when excavating and maintained during backfilling.

In case you've got a van or recreational vehicle, notify the builder before the onset of the work: he will have the ability to provide materials so. Some asphalt combinations produce an asphalt which is more resistant to heavy-duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to reach a thickness of 5 cm (2 in) after being compacted. For optimal stability, the base should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also mention that the setup of unwanted supports around the foundation is a good method to prevent possible cracks and that asphalting done in chilly weather is going to be of inferior quality. It's therefore far better to await the bright days to return before beginning work.

To avoid unpleasant surprises, select your contractor and be sure that the title and address of the company are composed about the contract. The start and finish dates of the job, as well as evidence of the builder's liability insurance and also the technical details of this job to be carried out, should also be included. No contractor should need a deposit before work begins. To prevent the inconvenience that might cause unforeseen costs, visit the AsphaltPleasant Grove site. You may thus have all the tools in hand to successfully complete your asphalt paving project.

Asphalt Pleasant Grove - Greatest Alabama at Alabama!

For quality asphalting perform , phone on Asphalt, Pleasant Grove specialist team. Confirm our Company section to figure out the regions served.

Tar And Chip Paving Pleasant Grove | Parking Lot Repair And Striping Pleasant Grove
Home >> alabama/pleasant grove >> asphalt
Share this...