Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt Coating in Prichard, Alabama


Tar And Chip Paving installed on an unstable surface can quickly lead to problems. There are 3 main options for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape rather than showing severe cracks or crumbling, hot asphalt mixture can be placed directly within your driveway. One aspect is height: make certain fences, garage flooring, and other constructions are not compromised by the greater degree of this surface.
  2. Remove old driveway, counter into the floor: The existing driveway is completely removed (or you may not have a driveway nonetheless ) and 4 to 6 inches of warm paving stone is put right on the ground.
  3. Remove the old driveway and fasten it to a good surface. This is the preferred method. An aggregated stone flooring partly replaces part of the hot asphalt mixture. Typically 6 to 8 inches of limestone extends under 3 inches of asphalt.

Our Services:

The best time to install Tar And Chip Paving in Prichard

The more asphalt you operate, the more leeway you have. By way of instance, at 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. Generally, for lean asphalt applications (about 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you ought to speak to your contractor. The hot mix is ​​still practical in this period, but the time is limited.

How much can an Tar And Chip Paving cost in Prichard?

Take into account the weather vagaries of our climate when choosing the quality of asphalt. The significant temperature variations that we experience cause considerable damage to asphalt work.

In addition, it will be good to distinguish the contractor if you own a recreational vehicle or a van. He might have to adapt the asphalt mixture so as to be more immune to the weight of heavy vehicles.

The Benefits of Tar And Chip Paving

  • Smooth end;
  • non-slip
  • easy to maintain
  • watertightness guaranteed
  • withstands the rigors of the Quebec climate quite well (provided it has been installed optimally);
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price varies depending on the characteristic of the asphalt used and the paving contractor.

For a sustainable Tar And Chip Paving

The life of an asphalt paver can be up to 20 decades, when the best conditions are satisfied. We are referring to a professional paving builder, a good quality of asphalt as well as also an optimal asphalt laying technique.

Tar And Chip Paving in Prichard: cost, quality of work and lifespan


The longevity of residential asphalt paving largely is dependent on the standard of the laying. Indeed, the significant causes of deformation or tearing of an asphalt coating are the absence of compaction plus a thin foundation. On the other hand, the maintenance of the asphalt sidewalk is also a determining factor in its longevity. That is to say, you'll need to seal your drive once in 10 years, at a minimum, so as to maintain its great state.


We advise you to notify your asphalting contractor in case you decide to get your driveway asphalt in order to sell your property. It might not be necessary to pay top dollar for laying asphalt , in this circumstance.

Tar And Chip Paving placing: cost and contract

The option of the asphalt laying contractor is indispensable. In order to not have unpleasant surprises, you will need to choose it carefully.

Our ensures and Tar And Chip Paving work

Make sure the paving contractor has liability insurance coverage. A visit to the web site of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has ever been the subject of complaints.

The following details must be included in the contract:

- date of start and end of the work;

- proof of insurance;

- technical details;

- RBQ accreditation number.

You should be aware that a paving builder cannot demand you to make a down payment before work has begun. But you need to agree to the payment terms and make sure it's about the contract.

Prior to estimating the asphalt drive to your new residence by a builder, or acquiring some basic knowledge is vital to guarantee that the job is done. Know first that the lack of compaction and the inadequate depth of the foundation are the two main sources for the deformation or tearing of a coating of asphalt. If it's a new driveway, it has to first be excavated to make room for a coating of crushed stone of adequate thickness. A geotextile membrane is going to be set beneath the granular backfill if the soil proves to be very loamy (clayey). If you have a new house, it's ideal to wait 6 to 12 months prior to paving your driveway, to allow the dirt to settle . In the case of a repair of this entrance, an easy replacement of the asphalt layer can be considered if the contractor believes that the present foundation is sufficient. In both scenarios, foundation redone or foundation preserved, the duration of its guarantee has to be exactly the same.

Tar And Chip Paving Prichard Alabama

The weather conditions in our lovely state can have a disastrous impact in an asphalt drive, thus the importance of adding a slope with a minimum slope of 2%. This will enable water to drain into the street and decrease the risk of heaving or cracking. This significant detail must be taken into account when excavating and maintained during backfilling.

If you've got a van or recreational vehicle, notify the contractor before the start of the job: he is going to have the ability to supply materials accordingly. Some asphalt combinations produce an asphalt that is more immune to heavy duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the base should extend over the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also note that the setup of side supports around the base is a fantastic method to prevent potential cracks and this asphalting done in chilly weather is going to be of inferior quality. It's therefore better to await the sunny days to return before starting work.

A Tar And Chip Paving contract with your contractor in Prichard

To avoid unpleasant surprises, select your contractor diligently and be sure that the title and address of the company are composed on the contract. The beginning and finish dates of the work, in addition to proof of this builder's liability insurance and also the technical details of the project to be carried out, should also be included. No contractor should require a down payment before work starts. To avoid the inconvenience that might lead to unforeseen costs, take a look at the Tar And Chip PavingPrichard site. You may thus have all the resources in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Prichard - Best Alabama in Alabama!

For quality asphalting work , call on Tar And Chip Paving, Prichard specialist team. We have over twenty years of experience in asphalt laying, resurfacing, maintenance and repair. Consult our Company department to find out the regions served.

Snow Removal Prichard | Asphalt Prichard
Home >> alabama/prichard >> tar and chip paving
Share this...