Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt surface in Princeton, Alabama


Asphalt installed in an unstable surface can quickly lead to problems. There are three Chief choices for the basic installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good shape and not showing serious fractures or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 aspect is height: make sure fences, garage flooring, and other constructions are not compromised by the greater level of the new surface.
  2. Eliminate old driveway, counter into the ground: The existing driveway is completely eliminated (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is placed right on the ground.
  3. Eliminate the old driveway and fasten it to a solid surface. This is the preferred method. An aggregated stone flooring partly replaces part of the hot asphalt mixture.

The more asphalt you operate, the more leeway you might have. For example, at 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also raises: 46 minutes. Generally, for thin asphalt applications (about 1.5 cm), you should wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, then you ought to consult with your contractor. The hot mix is ​​still practical during this period, but the time is limited.

How much does an Asphalt price in Princeton?

Take into account the weather vagaries of our climate when deciding upon the quality of asphalt. The significant temperature variations that we experience cause appreciable damage to asphalt work.

Furthermore, it will be good to distinguish the contractor should you have a recreational vehicle or a van. He might need to accommodate the asphalt mixture in order to be more resistant to the weight of heavy vehicles.

The Benefits of Asphalt

  • Smooth finish;
  • non invasive
  • Simple to Keep
  • watertightness ensured
  • withstands the rigors of the Quebec climate quite well (provided it has been set up );
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost fluctuates based on the quality of the asphalt employed and the paving contractor.

For a sustainable Asphalt

The life of an asphalt paver may be up to 20 years, when the best states are met. We are talking about a professional paving contractor, a good grade of asphalt and an optimal asphalt laying technique.


The durability of residential asphalt paving largely depends on the standard of the placing. Really, the major causes of deformation or tearing of an asphalt layer are the lack of compaction plus a thin foundation. However, the maintenance of the asphalt pavement can be a deciding factor in its own longevity. That is to say, you'll have to seal your driveway once in 10 decades, at a minimum, so as to keep its great condition.


We advise you to inform your asphalting contractor in case you decide to get your driveway asphalt so as to offer your property. It may not be essential to pay top dollar for placing asphalt , in such a circumstance.

Asphalt placing: cost and contract

The option of the asphalt laying builder is essential. In order not to have unpleasant surprises, you'll need to choose it carefully.

Our ensures and Asphalt work

Make sure the paving contractor has liability insurance coverage. A visit to the website of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has ever been the subject of complaints.

The following details should be included in the arrangement:

- date of start and end of the work;

- evidence of insurance;

- technical details;

- RBQ accreditation number.

You ought to be aware that a paving contractor cannot demand you to make a down payment before work has begun. But you need to agree to the payment terms and be sure it is on the contract.

Prior to estimating the asphalt drive to your new residence by a builder, or obtaining some fundamental knowledge is imperative to guarantee that the job is done. Know first that the lack of compaction and the insufficient thickness of the foundation are the two main causes of the deformation or tearing of a layer of asphalt. If it's a new driveway, then it has to first be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane will be placed under the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you own a new house, it is best to wait 6 to 12 months before paving your drive, to enable the soil to settle . In the case of a repair of the entry, a simple replacement of the asphalt layer can be considered in the event the contractor considers that the existing base is sufficient. In both scenarios, base redone or base preserved, the whole period of its warranty has to be the same.

Asphalt Princeton Alabama

The weather conditions in our beautiful province may have a devastating effect in an asphalt drive, thus the importance of adding a slope with a minimum slope of 2%. This will enable water to drain to the street and decrease the risk of heaving or cracking. This important detail has to be taken into consideration when excavating and maintained during backfilling.

If you have a van or recreational vehicle, notify the contractor prior to the start of the work: he is going to be able to supply materials accordingly. Some asphalt mixtures produce an asphalt which is more immune to heavy duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to reach a thickness of at least 5 cm (2 in) after being compacted. For optimum stability, the foundation should extend across the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also note that the setup of side supports around the foundation is a fantastic way to prevent possible cracks and that asphalting done in chilly weather is going to be of poor quality. It's therefore far better to await the sunny days to go back before starting work.

A definite contract with your contractor in Princeton

To avoid unpleasant surprises, then choose your contractor and be certain the name and address of his company are composed about the contract. The start and end dates of this work, in addition to evidence of this builder's liability insurance and also the technical specifics of this job to be carried out, should also be included. No contractor should need a deposit before work begins. To avoid the inconvenience that could cause unforeseen expenses, take a look at the AsphaltPrinceton website. You will thus have the tools in hand to successfully finish your asphalt paving project.

Asphalt Princeton - Best Alabama in Alabama!

For quality asphalting perform , phone on Asphalt, Princeton professional team. We have over 20 years of experience in asphalt laying, resurfacing, maintenance and repair. Confirm our Business department to figure out the regions served.

Tar And Chip Paving Princeton | Parking Lot Repair And Striping Princeton
Home >> alabama/princeton >> asphalt
Share this...