Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt Coating in Princeton, Alabama


Tar And Chip Paving installed in an unstable surface could quickly lead to problems. There are 3 Chief choices for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good condition and not showing severe fractures or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 facet is height: make certain fences, garage floors, and other constructions aren't jeopardized by the higher degree of the new surface.
  2. Eliminate old driveway, peg to the floor: The existing driveway is completely eliminated (or you might not have a driveway yet) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Remove the old driveway and fasten it into a good surface. This is the preferred method. An aggregated stone flooring partly replaces part of the hot asphalt mix.

Our Services:

The best time to install Tar And Chip Paving from Princeton

The longer asphalt you operate, the more leeway you have. For instance, in 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. Generally, for lean asphalt programs (approximately 1.5 cm), you should wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you'll need to consult with your contractor. The hot mix is ​​still functional during this period of time, however, the time is constrained.

How much can an Tar And Chip Paving price in Princeton?

Take into account the weather vagaries of the climate when choosing the quality of asphalt. The substantial temperature variations we experience cause appreciable damage to asphalt perform.

In addition, it'll be useful to distinguish the contractor should you have a recreational vehicle or a van. He will have to adapt the asphalt mixture in order to be more immune to the weight of heavy vehicles.

The advantages of Tar And Chip Paving

A driveway paved with asphalt has several benefits:

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the quality of the asphalt used along with the paving contractor.

To get a sustainable Tar And Chip Paving

The existence of an asphalt paver can be up to 20 decades, when the best conditions are met. We are talking about a professional paving builder, a great quality of asphalt and an optimal asphalt laying technique.


The durability of residential asphalt paving largely depends upon the quality of the laying. Really, the major causes of deformation or tearing of an asphalt layer are the absence of compaction and a lean base. On the other hand, the maintenance of the asphalt pavement is also a determining factor in its own longevity. That's to say, you will need to seal your driveway once in 10 decades, at a minimum, in order to maintain its great condition.


We suggest that you inform your asphalting contractor in case you choose to get your driveway asphalt so as to sell your property. It might not be essential to pay top dollar for placing asphalt , in such a case.

Tar And Chip Paving placing: price and contract

The option of the asphalt laying builder is essential. In order to not have unpleasant surprises, then you'll need to choose it carefully.

Our guarantees and Tar And Chip Paving work

Guarantee that the paving contractor has liability insurance coverage. A visit to the web site of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has ever been the subject of complaints.

These details should be included in the contract:

- date of beginning and finish of the work;

- proof of insurance;

- technical details;

- RBQ certification number.

You should be aware that a paving builder can't demand you to make a deposit before work has started. However, you need to agree to the payment terms and be sure it is on the contract.

A solid base for Tar And Chip Paving- Princeton

Before redoing the asphalt drive to your new home by a builder, or acquiring some basic knowledge is vital to guarantee that the job is well done. Know first that the absence of compaction and the inadequate depth of the base are the two chief sources for the deformation or ripping of a coating of asphalt. When it is a new driveway, it must first be excavated to make room for a coating of crushed stone of sufficient thickness. A geotextile membrane is going to be placed under the granular backfill if the dirt proves to be very loamy (clayey). If you own a new home, it's ideal to wait for 6 to 12 months before paving your drive, to allow the dirt to settle . In the event of a fix of this entry, a simple replacement of the asphalt layer can be considered if the contractor considers that the present foundation is adequate. In both scenarios, base redone or foundation preserved, the whole period of its warranty must be exactly the same.

Tar And Chip Paving Princeton Alabama

The weather conditions in our lovely state may have a disastrous impact in an asphalt driveway, thus the significance of including a slope having a minimum slope of 2%. This will enable water to drain into the road and decrease the danger of heaving or cracking. This significant detail must be taken into account when excavating and preserved during backfilling.

In case you've got a van or recreational vehicle, notify the builder before the onset of the work: he will be able to supply materials accordingly. Some asphalt combinations produce an asphalt that is more resistant to heavy duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to reach a thickness of at least 5 cm (2 ) after being compacted. For optimal stability, the foundation should extend across the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also note that the installation of side supports around the foundation is a fantastic method to prevent possible cracks and this asphalting done in cold weather is going to be of poor quality. It is therefore far better to await the sunny days to return before starting work.

A definite contract with your contractor in Princeton

To avoid unpleasant surprises, then choose your contractor and make sure the title and address of the business are composed about the contract. The beginning and end dates of the job, as well as evidence of this contractor's liability insurance and the technical specifics of this project to be carried out, should also be included. No contractor should require a deposit before work starts. To avoid the inconvenience that might cause unforeseen costs, visit the Tar And Chip PavingPrinceton site. You will thus have the resources in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Princeton - Greatest Alabama at Alabama!

For caliber asphalting work , call on Tar And Chip Paving, Princeton professional team. We have more than 20 years of experience in asphalt laying, resurfacing, maintenance and repair. Consult our Company section to figure out the regions served.

Snow Removal Princeton | Asphalt Princeton
Home >> alabama/princeton >> tar and chip paving
Share this...