Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt Coating in Saks, Alabama


Tar And Chip Paving installed on an unstable surface can quickly lead to problems. There are three main options for the Simple setup:

  1. Paving Over Existing Driveway: If your current driveway is in good condition rather than showing severe fractures or crumbling, hot asphalt mix can be placed directly within your driveway. One facet is elevation: make sure fences, garage floors, and other constructions aren't compromised by the greater level of this surface.
  2. Eliminate old driveway, peg to the ground: The existing driveway is totally removed (or you might not have a driveway nonetheless ) and 4 to 6 inches of warm paving stone is put right on the ground.
  3. Remove the old driveway and secure it to a solid surface. This is actually the preferred method. An aggregated stone floor partially replaces part of the hot asphalt mixture. Typically 6 to 8 inches of aggregate goes under 3 inches of asphalt.

Our Services:

The best time to install Tar And Chip Paving in Saks

The longer asphalt you operate, the more leeway you have. For instance, at 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also increases: 46 minutes. Generally, for lean asphalt applications (about 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you ought to consult with your contractor. The hot mix is ​​still functional in this period, but the time is limited.

How much does an Tar And Chip Paving price in Saks?

Consider the weather vagaries of our climate when deciding upon the standard of asphalt. The significant temperature variations that we experience cause considerable damage to asphalt work.

Furthermore, it will be useful to tell the contractor should you own a recreational vehicle or a van. He will need to accommodate the asphalt mix so as to be more immune to the weight of heavy vehicles.

The advantages of Tar And Chip Paving

A driveway paved with asphalt has several advantages:

It'll cost you between $ 3 and $11 per square foot; the cost varies depending on the characteristic of the asphalt employed and the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver may be up to 20 years, when the best states are satisfied. We are talking about a professional paving contractor, a great grade of asphalt as well as an optimal asphalt laying technique.

Tar And Chip Paving in Saks: price, quality of work and lifespan


The longevity of residential asphalt paving chiefly depends on the quality of the placing. Indeed, the significant causes of deformation or tearing of an asphalt layer are the absence of compaction and a thin foundation. On the other hand, the maintenance of the asphalt pavement can be a deciding factor in its longevity. That is to say, you will have to seal your drive once in ten decades, at a minimum, so as to maintain its good condition.


We advise you to notify your asphalting contractor if you decide to get your driveway asphalt so as to sell your property. It may not be essential to pay top dollar for laying asphalt , in this circumstance.

Tar And Chip Paving placing: price and contract

The choice of the asphalt laying builder is essential. In order not to have unpleasant surprises, then you'll need to choose it carefully.

Our guarantees and Tar And Chip Paving work

Guarantee that the paving contractor has liability insurance coverage. A visit to the web site of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has been the subject of complaints.

The following details should be included in the arrangement:

- date of start and end of the work;

- evidence of insurance;

- technical particulars;

- RBQ accreditation number.

You should know that a paving contractor can't demand that you make a deposit before work has started. However, you need to agree to the payment provisions and be sure it is on the contract.

Before redoing the asphalt drive to your new home by a contractor, or obtaining some basic knowledge is vital to guarantee that the job is done. Know first that the absence of compaction and the inadequate thickness of the base are the two chief sources for the deformation or ripping of a layer of asphalt. If it is a new driveway, it has to first be excavated to make room for a coating of crushed stone of sufficient thickness. A geotextile membrane will be placed beneath the granular backfill if the soil proves to be very loamy (clayey). If you have a new home, it is ideal to wait 6 to 12 months prior to paving your driveway, to enable the dirt to settle . In the case of a repair of the entry, an easy replacement of the asphalt layer can be considered in the event the contractor believes that the existing foundation is adequate. In both scenarios, base redone or base preserved, the duration of its guarantee has to be the same.

Tar And Chip Paving Saks Alabama

The weather conditions in our beautiful province can have a devastating effect on an asphalt driveway, thus the importance of including a slope having a minimum slope of 2%. This will enable water to drain into the street and decrease the risk of heaving or cracking. This significant detail has to be taken into consideration when excavating and maintained during backfilling.

If you have a van or recreational vehicle, notify the contractor prior to the start of the work: he will have the ability to supply materials accordingly. Some asphalt mixtures produce an asphalt which is more immune to heavy duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) so as to reach a thickness of at least 5 cm (2 in) after being compacted. For optimum stability, the base should extend over the surface to be paved by about thirty centimeters (a couple inches) on each side. Also mention that the installation of unwanted supports around the foundation is a good method to prevent potential cracks and that asphalting done in cold weather is going to be of inferior quality. It is therefore far better to wait for the sunny days to go back before starting work.

A Tar And Chip Paving contract with your contractor in Saks

To avoid unpleasant surprises, then select your contractor and make sure that the name and address of his company are composed about the contract. The beginning and end dates of this work, as well as evidence of this builder's liability insurance and also the technical details of the project to be carried out, should also be included. No contractor should need a deposit before work starts. To avoid the inconvenience that could lead to unforeseen expenses, visit the Tar And Chip PavingSaks site. You will thus have all the tools in hand to successfully complete your asphalt paving project.

Tar And Chip Paving Saks - Greatest Alabama at Alabama!

For caliber asphalting work , call on Tar And Chip Paving, Saks specialist team. We've got over twenty decades of expertise in asphalt laying, resurfacing, maintenance and repair. Consult our Business section to figure out the regions served.

Snow Removal Saks | Asphalt Saks
Home >> alabama/saks >> tar and chip paving
Share this...