Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt Coating in Selma, Alabama


Asphalt installed in an unstable surface could quickly lead to problems. There are 3 Chief options for the basic installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition rather than revealing serious cracks or crumbling, hot asphalt mixture can be laid directly over your driveway. One facet is elevation: make certain fences, garage floors, and other structures aren't jeopardized by the higher level of the new surface.
  2. Remove old driveway, counter into the ground: The existing driveway is completely removed (or you might not have a driveway yet) and 4 to 6 inches of warm paving stone is put right on the ground.
  3. Eliminate the old driveway and secure it to a solid surface. This is actually the preferred method. An aggregated stone flooring partly replaces part of this hot asphalt mixture. Generally 6 to 8 inches of limestone goes under 3 inches of asphalt.

The longer asphalt you work, the more leeway you might have. For instance, at 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. In general, for lean asphalt applications (about 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you'll need to consult with your contractor. The hot mix is ​​still practical during this period, but the time is limited.

How much does an Asphalt cost in Selma?

Consider the weather vagaries of our climate when choosing the quality of asphalt. The significant temperature variations we experience cause considerable damage to asphalt work.

Furthermore, it'll be useful to distinguish the contractor should you have a recreational vehicle or even a van. He might need to accommodate the asphalt mix so as to be more immune to the weight of heavy vehicles.

The advantages of Asphalt

A driveway paved with asphalt has several benefits:

It'll cost you between $ 3 and $11 per square foot; the cost fluctuates based on the characteristic of the asphalt employed along with the paving contractor.

To get a sustainable Asphalt

The life of an asphalt paver may be up to 20 years, when the best conditions are met. We're referring to a professional paving builder, a good quality of asphalt and an optimal asphalt laying technique.

Asphalt in Selma: cost, quality of work and lifespan


The longevity of residential asphalt paving largely is dependent upon the quality of the laying. Indeed, the major causes of deformation or ripping of an asphalt coating are the lack of compaction plus a lean base. On the other hand, the maintenance of the asphalt pavement is also a determining factor in its own longevity. That is to say, you'll have to seal your driveway once in ten decades, at a minimum, so as to keep its great condition.


We advise you to inform your asphalting builder in case you choose to have your driveway asphalt in order to offer your property. It might not be necessary to pay top dollar for placing asphalt , in such a circumstance.

Asphalt placing: cost and contract

The option of the asphalt laying contractor is essential. In order not to have unpleasant surprises, you will have to select it carefully.

Guarantee that the paving contractor has liability insurance. A trip to the website of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has been the subject of complaints.

The following details must be included in the contract:

- date of beginning and end of the work;

- evidence of insurance;

- technical particulars;

- RBQ accreditation number.

You should know that a paving builder cannot require you to make a down payment before work has started. But you need to agree to the payment terms and be sure it is on the contract.

A strong foundation for Asphalt- Selma

Prior to estimating the asphalt drive to your new residence by a builder, or acquiring some basic knowledge is vital to make sure the job is well done. Know first that the absence of compaction and the inadequate depth of the base are the two main sources for the deformation or tearing of a coating of asphalt. If it is a new driveway, it has to first be excavated to make room for a layer of crushed stone of sufficient thickness. A geotextile membrane will be set under the granular backfill if the dirt proves to be very loamy (clayey). If you have a new home, it is ideal to wait 6 to 12 months prior to paving your driveway, to allow the dirt to settle . In the event of a fix of this entry, an easy replacement of the asphalt coating can be considered in the event the contractor believes that the existing foundation is sufficient. In both cases, base redone or foundation preserved, the duration of its warranty has to be exactly the same.

Asphalt Selma Alabama

The weather conditions in our beautiful province can have a disastrous impact in an asphalt driveway, hence the importance of adding a slope with a minimum slope of 2%. This will allow water to drain into the street and decrease the danger of heaving or cracking. This important detail must be taken into account when excavating and maintained during backfilling.

If you've got a van or recreational vehicle, notify the contractor prior to the start of the job: he will have the ability to provide materials accordingly. Some asphalt combinations produce an asphalt which is more resistant to heavy-duty vehicles.

The asphalt layer should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the foundation should extend over the surface to be paved by about thirty centimeters (a couple inches) on each side. Also mention that the installation of side supports around the base is a fantastic method to prevent possible cracks and that asphalting done in cold weather is going to be of poor quality. It is therefore far better to wait for the bright days to return before beginning work.

A Asphalt contract with your contractor in Selma

To avoid unpleasant surprises, choose your contractor diligently and be sure that the name and address of his company are composed on the contract. The start and finish dates of the work, in addition to evidence of this builder's liability insurance and also the technical specifics of this job to be carried out, should also be included. No contractor should require a down payment before work begins. To avoid the inconvenience that might lead to unforeseen expenses, visit the AsphaltSelma website. You may thus have the resources in hand to successfully finish your asphalt paving project.

Asphalt Selma - Greatest Alabama in Alabama!

For quality asphalting work , phone on Asphalt, Selma professional team. We have more than twenty years of expertise in asphalt laying, resurfacing, maintenance and repair. Confirm our Business section to find out the regions served.

Tar And Chip Paving Selma | Parking Lot Repair And Striping Selma
Home >> alabama/selma >> asphalt
Share this...