Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt Coating in Tillmans Corner, Alabama


Tar And Chip Paving installed in an unstable surface could quickly lead to problems. There are 3 Chief options for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not showing severe fractures or crumbling, hot asphalt mixture can be laid directly over your driveway. 1 facet is elevation: make sure fences, garage flooring, and other constructions aren't jeopardized by the higher level of the new surface.
  2. Remove old driveway, counter into the ground: The present driveway is completely removed (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is put right on the ground.
  3. Remove the old driveway and fasten it to a good surface. This is the preferred method. An aggregated stone flooring partially replaces part of this hot asphalt mix. Generally 6 to 8 inches of aggregate goes under 3 inches of asphalt.

Our Services:

The best time to install Tar And Chip Paving in Tillmans Corner

The more asphalt you work, the more leeway you might have. By way of instance, in 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. In general, for lean asphalt applications (about 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you'll need to consult with your contractor. The hot mix is ​​still practical during this period, however, the time is constrained.

How much does an Tar And Chip Paving price in Tillmans Corner?

Take into account the weather vagaries of the climate when deciding upon the standard of asphalt. The substantial temperature variations that we experience cause appreciable damage to asphalt perform.

Furthermore, it'll be good to tell the contractor should you have a recreational vehicle or even a van. He might need to accommodate the asphalt mix in order to be more resistant to the weight of heavy vehicles.

The Benefits of Tar And Chip Paving

A driveway paved with asphalt has several benefits:

It'll cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt employed along with the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver can be around 20 years, when the very best conditions are satisfied. We are talking about a professional paving contractor, a good grade of asphalt as well as also an optimal asphalt laying technique.


The durability of residential asphalt paving largely is dependent on the standard of the laying. Indeed, the major causes of deformation or ripping of an asphalt coating are the lack of compaction and a thin foundation. However, the maintenance of the asphalt sidewalk is also a determining factor in its own longevity. That is to say, you'll have to seal your drive once in 10 years, at a minimum, so as to maintain its good state.


We advise you to inform your asphalting contractor if you decide to get your driveway asphalt in order to offer your property. It might not be necessary to pay top dollar for placing asphalt , in such a case.

Tar And Chip Paving placing: price and contract

The option of the asphalt laying builder is indispensable. In order to not have unpleasant surprises, you'll have to choose it carefully.

Our guarantees and Tar And Chip Paving work

Guarantee that the paving contractor has liability insurance. A visit to the web site of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has become the subject of complaints.

These details should be included in the arrangement:

- date of start and end of the work;

- evidence of insurance;

- technical particulars;

- RBQ accreditation number.

You ought to be aware that a paving builder can't require you to make a deposit before work has started. However, you should agree to the payment terms and be sure it's on the contract.

Before redoing the asphalt drive to your new home by a builder, or obtaining some basic knowledge is imperative to guarantee that the job is well done. Know first that the lack of compaction and the insufficient thickness of the foundation are the two main sources for the deformation or ripping of a coating of asphalt. If it's a new driveway, then it has to first be excavated to make room for a coating of crushed stone of sufficient depth. A geotextile membrane is going to be set under the granular backfill if the dirt turns out to be somewhat loamy (clayey). If you own a new home, it is ideal to wait 6 to 12 months before paving your drive, to enable the soil to settle naturally. In the event of a repair of this entrance, an easy replacement of the asphalt layer can be considered if the contractor considers that the existing foundation is adequate. In both cases, base redone or foundation preserved, the whole period of its guarantee has to be the same.

Tar And Chip Paving Tillmans Corner Alabama

The weather conditions in our beautiful province may have a disastrous impact in an asphalt driveway, hence the significance of adding a slope having a minimum slope of 2%. This will allow water to drain into the street and decrease the danger of heaving or cracking. This important detail has to be taken into consideration when excavating and preserved during backfilling.

If you have a van or recreational vehicle, notify the builder prior to the onset of the job: he will have the ability to provide materials accordingly. Some asphalt combinations produce an asphalt that is more resistant to heavy-duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to accomplish a thickness of 5 cm (2 ) after being compacted. For optimal stability, the base should extend over the surface to be paved by about thirty centimeters (a couple inches) on each side. Also mention that the installation of unwanted supports around the base is a fantastic way to avoid potential cracks and that asphalting done in chilly weather is going to be of poor quality. It's therefore far better to await the sunny days to return before beginning work.

A definite contract with your builder in Tillmans Corner

To avoid unpleasant surprises, then choose your contractor diligently and make certain that the title and address of his company are written on the contract. The start and end dates of the job, as well as proof of this builder's liability insurance and also the technical details of this job to be completed, should also be included. No contractor should require a deposit before work starts. To prevent the inconvenience that could cause unforeseen costs, visit the Tar And Chip PavingTillmans Corner site. You will thus have the tools in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Tillmans Corner - Greatest Alabama at Alabama!

For quality asphalting work , call on Tar And Chip Paving, Tillmans Corner professional team. Confirm our Company department to find out the regions served.

Snow Removal Tillmans Corner | Asphalt Tillmans Corner
Home >> alabama/tillmans corner >> tar and chip paving
Share this...