Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt Coating in Trussville, Alabama


Asphalt installed on an unstable surface can quickly lead to difficulties. There are 3 Chief choices for the Simple setup:

  1. Paving Over Existing Driveway: If your current driveway is in good condition rather than revealing severe cracks or crumbling, hot asphalt mix can be placed directly within your driveway. One aspect is elevation: make sure fences, garage floors, and other constructions are not compromised by the higher level of this surface.
  2. Remove old driveway, counter into the ground: The present driveway is completely removed (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Remove the old driveway and fasten it into a solid surface. This is actually the preferred method. An aggregated stone flooring partially replaces part of this hot asphalt mixture. Generally 6 to 8 inches of aggregate extends under 3 inches of asphalt.

The more asphalt you operate, the more leeway you have. For instance, in 40 F, the crews just have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. In general, for thin asphalt applications (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you ought to speak to your contractor. The hot mix is ​​still functional during this period, however, the time is constrained.

How much can an Asphalt price in Trussville?

Take into account the weather vagaries of our climate when choosing the standard of asphalt. The substantial temperature variations we experience cause appreciable damage to asphalt perform.

Furthermore, it will be useful to distinguish the contractor should you own a recreational vehicle or a van. He will need to accommodate the asphalt mixture in order to be more resistant to the weight of heavy vehicles.

The Benefits of Asphalt

  • Smooth finish;
  • non-slip
  • Simple to Keep
  • watertightness ensured
  • withstands the rigors of the Quebec climate quite well (provided it's been installed );
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt used along with the paving contractor.

For a sustainable Asphalt

The existence of an asphalt paver may be up to 20 years, when the very best states are met. We are referring to a professional paving builder, a good quality of asphalt as well as an optimal asphalt laying technique.

Asphalt in Trussville: cost, quality of work and lifespan


The durability of residential asphalt paving chiefly is dependent upon the standard of the placing. Indeed, the significant causes of deformation or tearing of an asphalt layer are the absence of compaction plus a lean base. However, the maintenance of the asphalt sidewalk can be a deciding factor in its longevity. That's to say, you'll have to seal your drive once in ten years, at a minimum, so as to maintain its good condition.


We advise you to inform your asphalting contractor if you choose to have your driveway asphalt in order to sell your property. It might not be essential to pay top dollar for laying asphalt , in this circumstance.

Asphalt laying: cost and contract

The option of the asphalt laying builder is essential. In order not to have unpleasant surprises, then you will have to select it carefully.

Make sure the paving contractor has liability insurance. A trip to the website of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has ever been the subject of complaints.

The following details must be included in the contract:

- date of beginning and end of the job;

- proof of insurance;

- technical particulars;

- RBQ accreditation number.

You ought to know that a paving contractor can't demand you to make a down payment before work has begun. But you should agree on the payment terms and be sure it is on the contract.

Prior to estimating the asphalt driveway to your new residence by a contractor, or obtaining some basic knowledge is imperative to guarantee that the job is well done. Know first that the absence of compaction and the inadequate depth of the foundation are the two chief sources for the deformation or tearing of a coating of asphalt. If it is a new driveway, then it has to initially be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane will be set under the granular backfill if the dirt proves to be very loamy (clayey). If you have a new house, it's ideal to wait for 6 to 12 months prior to paving your drive, to allow the dirt to settle . In the case of a repair of the entry, an easy replacement of the asphalt coating can be considered in the event the contractor believes that the present foundation is adequate. In both scenarios, foundation redone or base maintained, the duration of its guarantee has to be exactly the same.

Asphalt Trussville Alabama

The weather conditions in our beautiful province may have a devastating effect on an asphalt driveway, thus the importance of including a slope with a minimum slope of 2%. This will enable water to drain into the street and decrease the danger of heaving or cracking. This significant detail has to be taken into account when excavating and preserved during backfilling.

In case you have a van or recreational vehicle, notify the builder prior to the onset of the work: he is going to be able to provide materials so. Some asphalt mixtures produce an asphalt which is more resistant to heavy-duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of 5 cm (2 in) after being compacted. For optimal stability, the base should extend across the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also mention that the setup of side supports around the base is a fantastic method to prevent possible cracks and that asphalting done in cold weather will be of inferior quality. It is therefore far better to await the sunny days to return before starting work.

A Asphalt contract with your builder in Trussville

To avoid unpleasant surprises, then select your contractor and be certain that the name and address of the business are composed on the contract. The start and end dates of the work, in addition to proof of the contractor's liability insurance and also the technical specifics of this job to be completed, should also be included. No contractor should require a deposit before work starts. To avoid the inconvenience that might lead to unforeseen expenses, visit the AsphaltTrussville site. You may thus have all the tools in hand to successfully complete your asphalt paving project.

Asphalt Trussville - Best Alabama at Alabama!

For caliber asphalting perform , phone on Asphalt, Trussville specialist team. Confirm our Business section to find out the regions served.

Tar And Chip Paving Trussville | Parking Lot Repair And Striping Trussville
Home >> alabama/trussville >> asphalt
Share this...