Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt surface in Trussville, Alabama


Tar And Chip Paving installed on an unstable surface can quickly lead to difficulties. There are three Chief options for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape and not revealing serious fractures or crumbling, hot asphalt mixture can be laid directly over your driveway. 1 facet is height: make sure fences, garage flooring, and other constructions aren't jeopardized by the higher level of the surface.
  2. Remove old driveway, peg to the floor: The existing driveway is totally eliminated (or you might not have a driveway yet) and 4 to 6 inches of hot paving stone is put right on the ground.
  3. Eliminate the old driveway and fasten it into a solid surface. This is the preferred method. An aggregated stone floor partly replaces part of the hot asphalt mixture.

Our Services:

The best time to install Tar And Chip Paving from Trussville

The more asphalt you operate, the more leeway you have. For example, in 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt depth increases by 3 inches, the workability time also raises: 46 minutes. In general, for thin asphalt applications (about 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you'll need to consult with your contractor. The hot mix remains practical in this period, however, the time is constrained.

How much can an Tar And Chip Paving price in Trussville?

Take into account the weather vagaries of the climate when deciding upon the standard of asphalt. The significant temperature variations that we experience cause appreciable damage to asphalt work.

Furthermore, it'll be useful to tell the contractor should you own a recreational vehicle or even a van. He will have to adapt the asphalt mix in order to be more resistant to the weight of heavy vehicles.

The advantages of Tar And Chip Paving

  • Smooth end;
  • non-slip
  • Simple to maintain
  • watertightness ensured
  • withstands the rigors of the Quebec climate very well (provided it's been set up );
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt used along with the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver may be up to 20 decades, when the very best states are met. We are talking about a professional paving builder, a good quality of asphalt as well as an optimal asphalt laying technique.


The longevity of residential asphalt paving chiefly depends upon the quality of the laying. Indeed, the significant causes of deformation or tearing of an asphalt layer are the lack of compaction and a lean base. On the other hand, the upkeep of the asphalt pavement can be a determining factor in its own longevity. That's to say, you will need to seal your driveway once in ten decades, at a minimum, in order to maintain its good state.


We suggest that you inform your asphalting builder in case you decide to get your driveway asphalt in order to offer your property. It may not be essential to pay top dollar for placing asphalt , in such a case.

Tar And Chip Paving laying: price and contract

The option of the asphalt laying builder is indispensable. In order not to have unpleasant surprises, then you will need to choose it carefully.

Our guarantees and Tar And Chip Paving work

Make sure the paving contractor has liability insurance. A visit to the website of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has been the subject of complaints.

The following details should be included in the arrangement:

- date of beginning and end of the work;

- evidence of insurance;

- technical particulars;

- RBQ certification number.

You should be aware that a paving builder can't demand you to make a down payment before work has begun. But you need to agree to the payment terms and be sure it is about the contract.

A solid foundation for Tar And Chip Paving- Trussville

Prior to estimating the asphalt drive to your new home by a builder, or acquiring some basic knowledge is imperative to make sure the job is well done. Know first that the lack of compaction and the insufficient depth of the foundation are the two chief causes of the deformation or tearing of a layer of asphalt. If it is a new driveway, then it must first be excavated to make room for a layer of crushed stone of adequate thickness. A geotextile membrane will be placed beneath the granular backfill if the dirt proves to be somewhat loamy (clayey). If you have a new house, it's best to wait for 6 to 12 months prior to paving your driveway, to allow the soil to settle naturally. In the case of a repair of this entry, a simple replacement of the asphalt coating can be considered in the event the contractor considers that the existing foundation is adequate. In both cases, foundation redone or foundation maintained, the whole period of its warranty has to be exactly the same.

Tar And Chip Paving Trussville Alabama

The weather conditions in our lovely state may have a disastrous impact on an asphalt driveway, hence the importance of adding a slope having a minimum slope of 2%. This will allow water to drain to the street and minimize the risk of heaving or cracking. This important detail has to be taken into consideration when excavating and maintained during backfilling.

In case you have a van or recreational vehicle, notify the builder prior to the start of the work: he will have the ability to provide materials accordingly. Some asphalt mixtures produce an asphalt which is more immune to heavy-duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to accomplish a thickness of 5 cm (2 ) after being compacted. For optimal stability, the base should extend over the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also note that the setup of side supports around the foundation is a good method to prevent possible cracks and that asphalting done in cold weather will be of inferior quality. It is therefore far better to wait for the bright days to go back before starting work.

To avoid unpleasant surprises, choose your contractor and make certain the name and address of his company are composed on the contract. The beginning and finish dates of the job, as well as evidence of the contractor's liability insurance and the technical details of this job to be completed, should also be included. No contractor should require a down payment before work begins. To prevent the inconvenience that might lead to unforeseen expenses, take a look at the Tar And Chip PavingTrussville site. You may thus have the resources in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Trussville - Greatest Alabama in Alabama!

For caliber asphalting work , call on Tar And Chip Paving, Trussville specialist team. Consult our Business department to figure out the regions served.

Snow Removal Trussville | Asphalt Trussville
Home >> alabama/trussville >> tar and chip paving
Share this...