Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt surface in Vestavia Hills, Alabama


Asphalt installed on an unstable surface can quickly lead to difficulties. There are three Chief choices for the basic installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition and not showing serious cracks or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 aspect is height: make certain fences, garage flooring, and other constructions are not jeopardized by the greater degree of the surface.
  2. Eliminate old driveway, counter into the ground: The present driveway is completely eliminated (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is put right on the ground.
  3. Remove the old driveway and fasten it to a good surface. This is the preferred method. An aggregated stone floor partially replaces part of this hot asphalt mixture. Typically 6 to 8 inches of aggregate extends under 3 inches of asphalt.

Our Services:

The best time to install Asphalt from Vestavia Hills

The longer asphalt you operate, the more leeway you might have. For example, at 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. Generally, for thin asphalt programs (approximately 1.5 cm), you need to wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you'll need to consult with your contractor. The hot mix is ​​still functional during this period of time, however, the time is limited.

How much does an Asphalt price in Vestavia Hills?

Take into account the weather vagaries of our climate when deciding upon the quality of asphalt. The substantial temperature variations that we experience cause considerable damage to asphalt work.

In addition, it will be useful to tell the contractor should you have a recreational vehicle or a van. He will have to accommodate the asphalt mixture in order to be more resistant to the burden of heavy vehicles.

The Benefits of Asphalt

A driveway paved with asphalt has several benefits:

It'll cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt used and the paving contractor.

For a sustainable Asphalt

The existence of an asphalt paver may be around 20 decades, when the best conditions are satisfied. We're referring to a professional paving contractor, a good quality of asphalt and also an optimal asphalt laying technique.


The durability of residential asphalt paving largely is dependent on the quality of the laying. Indeed, the significant causes of deformation or tearing of an asphalt layer are the lack of compaction plus a lean base. However, the upkeep of the asphalt sidewalk can be a determining factor in its longevity. That is to say, you'll need to seal your driveway once in ten years, at a minimum, in order to keep its good state.


We advise you to notify your asphalting builder in case you decide to get your driveway asphalt so as to offer your property. It might not be necessary to pay top dollar for placing asphalt , in this circumstance.

Asphalt placing: cost and contract

The option of the asphalt laying builder is indispensable. In order not to have unpleasant surprises, you'll need to select it carefully.

Guarantee that the paving contractor has liability insurance. A trip to the web site of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has become the subject of complaints.

The following details should be included in the contract:

- date of start and end of the job;

- evidence of insurance;

- technical particulars;

- RBQ accreditation number.

You ought to be aware that a paving builder can't require that you make a deposit before work has started. But you should agree on the payment terms and make sure it's on the contract.

Prior to estimating the asphalt drive to your new residence by a contractor, or acquiring some basic knowledge is imperative to make sure the job is done. Know first that the absence of compaction and the insufficient depth of the base are the two main sources for the deformation or ripping of a coating of asphalt. When it's a new driveway, it has to initially be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane will be placed under the granular backfill if the dirt proves to be very loamy (clayey). If you have a new house, it is best to wait for 6 to 12 months before paving your driveway, to allow the soil to settle . In the event of a repair of the entrance, a simple replacement of the asphalt coating can be considered if the contractor considers that the present base is adequate. In both scenarios, base redone or base preserved, the whole period of its guarantee has to be the same.

Asphalt Vestavia Hills Alabama

The weather conditions in our beautiful province may have a devastating effect in an asphalt driveway, hence the importance of including a slope having a minimum slope of 2%. This will enable water to drain to the road and minimize the danger of heaving or cracking. This important detail has to be taken into account when excavating and maintained during backfilling.

If you have a van or recreational vehicle, notify the builder prior to the onset of the work: he is going to have the ability to provide materials so. Some asphalt combinations produce an asphalt which is more immune to heavy duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of at least 5 cm (2 ) after being compacted. For optimum stability, the foundation should extend over the surface to be paved by roughly thirty centimeters (a dozen inches) on each side. Also mention that the setup of unwanted supports around the base is a good way to prevent possible cracks and this asphalting done in chilly weather is going to be of inferior quality. It's therefore better to await the sunny days to return before starting work.

A Asphalt contract with your contractor in Vestavia Hills

To avoid unpleasant surprises, then choose your contractor and make sure that the title and address of his company are composed about the contract. The beginning and end dates of this job, as well as proof of this contractor's liability insurance and the technical specifics of the job to be carried out, should also be included. No contractor should require a down payment before work starts. To prevent the inconvenience that might cause unforeseen costs, visit the AsphaltVestavia Hills website. You may thus have the tools in hand to successfully complete your asphalt paving project.

Asphalt Vestavia Hills - Best Alabama at Alabama!

For caliber asphalting perform , call on Asphalt, Vestavia Hills specialist team. Consult our Company section to figure out the regions served.

Tar And Chip Paving Vestavia Hills | Parking Lot Repair And Striping Vestavia Hills
Home >> alabama/vestavia hills >> asphalt
Share this...