Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Alternatives for the asphalt Coating in Vestavia Hills, Alabama


Tar And Chip Paving installed on an unstable surface could quickly lead to problems. There are three Chief choices for the Simple installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition rather than showing severe cracks or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 aspect is height: make certain fences, garage flooring, and other constructions aren't compromised by the greater level of this new surface.
  2. Eliminate old driveway, peg to the floor: The present driveway is completely removed (or you might not have a driveway nonetheless ) and 4 to 6 inches of hot paving stone is put right on the ground.
  3. Eliminate the old driveway and fasten it to a good surface. This is actually the preferred method. An aggregated stone floor partially replaces part of this hot asphalt mixture.

The longer asphalt you work, the more leeway you might have. By way of instance, in 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. In general, for lean asphalt applications (approximately 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you'll need to speak to your contractor. The hot mix is ​​still practical in this period of time, but the time is limited.

How much does an Tar And Chip Paving cost in Vestavia Hills?

Take into account the weather vagaries of the climate when deciding upon the quality of asphalt. The substantial temperature variations we experience cause appreciable damage to asphalt perform.

Furthermore, it'll be good to distinguish the contractor if you have a recreational vehicle or a van. He might have to adapt the asphalt mix so as to be more immune to the burden of heavy vehicles.

The advantages of Tar And Chip Paving

A driveway paved with asphalt has several benefits:

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt employed along with the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver can be up to 20 decades, when the very best states are met. We are referring to a professional paving contractor, a good quality of asphalt and also an optimal asphalt laying technique.

Tar And Chip Paving in Vestavia Hills: cost, quality of work and lifespan


The durability of residential asphalt paving largely is dependent on the quality of the placing. Really, the significant causes of deformation or ripping of an asphalt layer are the lack of compaction plus a lean base. On the other hand, the upkeep of the asphalt sidewalk can be a determining factor in its longevity. That's to say, you'll need to seal your driveway once in ten decades, at a minimum, in order to maintain its great state.


We suggest that you inform your asphalting contractor if you decide to have your driveway asphalt so as to offer your property. It might not be necessary to pay top dollar for laying asphalt , in such a circumstance.

Tar And Chip Paving laying: cost and contract

The choice of the asphalt laying contractor is indispensable. In order not to have unpleasant surprises, you'll need to select it carefully.

Our ensures and Tar And Chip Paving work

Make sure the paving contractor has liability insurance coverage. A trip to the web site of the Office for Consumer Protection (OPC) will allow you to confirm whether an entrepreneur has become the subject of complaints.

The following details should be included in the arrangement:

- date of start and end of the job;

- evidence of insurance;

- technical particulars;

- RBQ certification number.

You ought to know that a paving contractor can't demand you to make a down payment before work has begun. But you need to agree to the payment terms and make sure it is about the contract.

Before redoing the asphalt drive to your new residence by a builder, or obtaining some basic knowledge is imperative to guarantee that the job is done. Know first that the absence of compaction and the inadequate thickness of the foundation are the two chief causes of the deformation or ripping of a coating of asphalt. If it is a new driveway, then it has to first be excavated to make room for a layer of crushed stone of adequate thickness. A geotextile membrane will be set under the granular backfill if the dirt turns out to be very loamy (clayey). If you have a new house, it's ideal to wait 6 to 12 months prior to paving your driveway, to allow the soil to settle . In the case of a fix of the entrance, an easy replacement of the asphalt coating can be considered in the event the contractor considers that the present foundation is sufficient. In both cases, foundation redone or foundation preserved, the duration of its guarantee has to be the same.

Tar And Chip Paving Vestavia Hills Alabama

The weather conditions in our beautiful province can have a devastating effect on an asphalt drive, hence the importance of adding a slope with a minimum slope of 2%. This will allow water to drain to the street and decrease the risk of heaving or cracking. This important detail must be taken into consideration when excavating and maintained during backfilling.

In case you have a van or recreational vehicle, notify the contractor before the onset of the work: he is going to have the ability to supply materials so. Some asphalt combinations produce an asphalt that is more resistant to heavy duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to reach a thickness of at least 5 cm (2 in) after being compacted. For optimal stability, the foundation should extend over the surface to be paved by about thirty centimeters (a couple inches) on each side. Also note that the setup of unwanted supports around the foundation is a fantastic method to avoid potential cracks and that asphalting done in cold weather is going to be of poor quality. It's therefore far better to wait for the bright days to go back before starting work.

A definite contract with your contractor in Vestavia Hills

To avoid unpleasant surprises, then choose your contractor diligently and be certain the title and address of the company are composed on the contract. The beginning and finish dates of the job, as well as proof of this contractor's liability insurance and the technical details of this project to be completed, should also be included. No contractor should require a deposit before work starts. To prevent the inconvenience that could cause unforeseen costs, visit the Tar And Chip PavingVestavia Hills site. You may thus have all the tools in hand to successfully finish your asphalt paving project.

Tar And Chip Paving Vestavia Hills - Greatest Alabama in Alabama!

For caliber asphalting perform , call on Tar And Chip Paving, Vestavia Hills professional team. We have more than twenty years of expertise in asphalt laying, resurfacing, maintenance and repair. Consult our Business department to find out the regions served.

Snow Removal Vestavia Hills | Asphalt Vestavia Hills
Home >> alabama/vestavia hills >> tar and chip paving
Share this...