Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt Coating in Badger, Alaska


Asphalt installed in an unstable surface could quickly lead to problems. There are 3 Chief options for the basic setup:

  1. Paving Over Existing Driveway: If your existing driveway is in good condition and not showing serious fractures or crumbling, hot asphalt mixture can be laid directly over your driveway. One aspect is elevation: make certain fences, garage flooring, and other constructions aren't jeopardized by the higher degree of this new surface.
  2. Eliminate old driveway, peg to the floor: The present driveway is completely removed (or you may not have a driveway yet) and 4 to 6 inches of warm paving stone is placed right on the ground.
  3. Eliminate the old driveway and fasten it to a good surface. This is the preferred method. An aggregated stone flooring partly replaces part of this hot asphalt mixture. Generally 6 to 8 inches of aggregate extends under 3 inches of asphalt.

The longer asphalt you operate, the more leeway you have. For instance, at 40 F, the crews only have 16 minutes to operate on 1 1/2 inch thick asphalt. Generally, for lean asphalt applications (approximately 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you'll need to speak to your contractor. The hot mix is ​​still functional in this period of time, but the time is constrained.

How much does an Asphalt price in Badger?

Consider the weather vagaries of our climate when choosing the quality of asphalt. The substantial temperature variations we experience cause considerable damage to asphalt work.

Furthermore, it will be good to distinguish the contractor should you have a recreational vehicle or a van. He might have to accommodate the asphalt mix in order to be more immune to the burden of heavy vehicles.

The advantages of Asphalt

  • Smooth end;
  • non-slip
  • easy to Keep
  • watertightness ensured
  • withstands the rigors of the Quebec climate quite well (provided it has been installed optimally);
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the cost fluctuates based on the quality of the asphalt used and the paving contractor.

For a sustainable Asphalt

The life of an asphalt paver can be up to 20 decades, when the best states are met. We're talking about a professional paving contractor, a good quality of asphalt as well as also an optimal asphalt laying technique.


The longevity of residential asphalt paving largely is dependent upon the standard of the laying. Indeed, the major causes of deformation or tearing of an asphalt layer are the lack of compaction plus a thin foundation. On the other hand, the maintenance of the asphalt pavement can be a deciding factor in its own longevity. That's to say, you will need to seal your drive once in 10 decades, at a minimum, in order to keep its good state.


We advise you to inform your asphalting builder in case you choose to have your driveway asphalt in order to sell your property. It may not be essential to pay top dollar for placing asphalt , in such a case.

Asphalt laying: cost and contract

The option of the asphalt laying builder is indispensable. In order not to have unpleasant surprises, then you'll have to choose it carefully.

Make sure the paving contractor has liability insurance. A visit to the web site of the Office for Consumer Protection (OPC) will allow you to verify whether an entrepreneur has been the subject of complaints.

These details should be included in the arrangement:

- date of start and end of the job;

- proof of insurance;

- technical particulars;

- RBQ accreditation number.

You ought to know that a paving contractor can't require that you make a down payment before work has started. However, you need to agree on the payment provisions and make sure it is about the contract.

A strong foundation for Asphalt- Badger

Prior to estimating the asphalt driveway to your new home by a builder, or obtaining some basic knowledge is vital to make sure the job is well done. Know first that the lack of compaction and the inadequate depth of the base are the two main causes of the deformation or tearing of a layer of asphalt. If it's a new driveway, it has to first be excavated to make room for a coating of crushed stone of sufficient thickness. A geotextile membrane is going to be placed under the granular backfill if the soil turns out to be somewhat loamy (clayey). If you own a new house, it's ideal to wait for 6 to 12 months before paving your drive, to allow the soil to settle naturally. In the case of a repair of this entrance, a simple replacement of the asphalt coating can be considered if the contractor considers that the existing foundation is sufficient. In both scenarios, base redone or base maintained, the whole period of its guarantee must be the same.

Asphalt Badger Alaska

The weather conditions in our beautiful province may have a devastating effect in an asphalt driveway, hence the importance of including a slope with a minimum slope of 2%. This will enable water to drain into the road and decrease the risk of heaving or cracking. This important detail must be taken into account when excavating and maintained during backfilling.

In case you have a van or recreational vehicle, notify the builder before the onset of the job: he will be able to supply materials accordingly. Some asphalt mixtures produce an asphalt which is more immune to heavy duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) so as to reach a thickness of at least 5 cm (2 in) after being compacted. For optimal stability, the foundation should extend over the surface to be paved by about thirty centimeters (a couple inches) on each side. Also mention that the installation of side supports around the foundation is a fantastic way to avoid potential cracks and this asphalting done in cold weather will be of inferior quality. It's therefore better to await the bright days to return before starting work.

To avoid unpleasant surprises, then choose your contractor diligently and be certain that the name and address of his company are composed on the contract. The beginning and end dates of this work, as well as proof of the builder's liability insurance and the technical specifics of the project to be carried out, should also be included. No contractor should need a deposit before work begins. To prevent the inconvenience that might cause unforeseen expenses, visit the AsphaltBadger website. You may thus have the resources in hand to successfully complete your asphalt paving project.

Asphalt Badger - Best Alaska in Alaska!

For quality asphalting perform , call on Asphalt, Badger professional team. We've got more than 20 decades of expertise in asphalt laying, resurfacing, maintenance and repair. Confirm our Company department to figure out the regions served.

Tar And Chip Paving Badger | Parking Lot Repair And Striping Badger
Home >> alaska/badger >> asphalt
Share this...