Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Tar And Chip Paving- Options for the asphalt surface in College, Alaska


Tar And Chip Paving installed on an unstable surface could quickly lead to difficulties. There are 3 Chief choices for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good condition and not showing severe cracks or crumbling, hot asphalt mix can be placed directly within your driveway. 1 aspect is elevation: make sure fences, garage floors, and other structures are not compromised by the greater degree of the surface.
  2. Remove old driveway, peg to the ground: The existing driveway is completely eliminated (or you might not have a driveway yet) and 4 to 6 inches of hot paving stone is put directly on the ground.
  3. Remove the old driveway and secure it into a good surface. This is the preferred method. An aggregated stone floor partially replaces part of the hot asphalt mixture. Typically 6 to 8 inches of limestone extends under 3 inches of asphalt.

Our Services:

The best time to install Tar And Chip Paving in College

The longer asphalt you operate, the more leeway you might have. For instance, at 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. Generally, for thin asphalt programs (approximately 1.5 cm), you should wait until temperatures are 21 ° C or even higher. Between 50 and 60 F, you ought to consult with your contractor. The hot mix remains practical during this period of time, but the time is limited.

How much can an Tar And Chip Paving price in College?

Take into account the weather vagaries of our climate when deciding upon the quality of asphalt. The significant temperature variations we experience cause appreciable damage to asphalt perform.

Furthermore, it'll be useful to distinguish the contractor should you own a recreational vehicle or even a van. He will need to adapt the asphalt mixture in order to be more immune to the weight of heavy vehicles.

The advantages of Tar And Chip Paving

  • Smooth end;
  • non-slip
  • easy to Keep
  • watertightness ensured
  • withstands the rigors of the Quebec climate very well (provided it's been set up optimally);
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the cost varies depending on the quality of the asphalt used and the paving contractor.

To get a sustainable Tar And Chip Paving

The life of an asphalt paver can be up to 20 decades, when the very best states are met. We are talking about a professional paving builder, a great grade of asphalt as well as an optimal asphalt laying technique.


The durability of residential asphalt paving chiefly depends on the quality of the laying. Indeed, the major causes of deformation or ripping of an asphalt coating are the lack of compaction and a thin foundation. However, the upkeep of the asphalt pavement is also a deciding factor in its own longevity. That is to say, you will need to seal your drive once in ten decades, at a minimum, so as to maintain its great state.


We suggest that you notify your asphalting contractor in case you decide to get your driveway asphalt so as to sell your property. It might not be necessary to pay top dollar for placing asphalt , in such a case.

Tar And Chip Paving laying: cost and contract

The choice of the asphalt laying contractor is essential. In order to not have unpleasant surprises, then you will need to choose it carefully.

Guarantee that the paving contractor has liability insurance coverage. A trip to the website of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has ever become the subject of complaints.

These details should be included in the arrangement:

- date of start and end of the job;

- proof of insurance;

- technical details;

- RBQ certification number.

You ought to know that a paving builder can't require that you make a deposit before work has started. However, you need to agree on the payment provisions and make sure it's on the contract.

A strong foundation for Tar And Chip Paving- College

Prior to estimating the asphalt drive to your new residence by a builder, or obtaining some fundamental knowledge is vital to guarantee that the job is done. Know first that the absence of compaction and the inadequate thickness of the base are the two main sources for the deformation or ripping of a coating of asphalt. When it is a new driveway, it has to initially be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane is going to be placed beneath the granular backfill if the soil turns out to be very loamy (clayey). If you have a new home, it is ideal to wait for 6 to 12 months before paving your driveway, to allow the dirt to settle naturally. In the event of a fix of this entry, an easy replacement of the asphalt layer can be considered if the contractor believes that the present foundation is adequate. In both cases, base redone or base maintained, the duration of its guarantee must be exactly the same.

Tar And Chip Paving College Alaska

The weather conditions in our beautiful province can have a devastating effect on an asphalt driveway, hence the significance of including a slope with a minimum slope of 2%. This will enable water to drain into the road and decrease the risk of heaving or cracking. This important detail has to be taken into consideration when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the contractor prior to the onset of the work: he is going to be able to provide materials accordingly. Some asphalt combinations produce an asphalt that is more immune to heavy-duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to accomplish a thickness of 5 cm (2 in) after being compacted. For optimal stability, the base should extend across the surface to be paved by about thirty centimeters (a couple inches) on each side. Also mention that the installation of unwanted supports around the base is a fantastic way to prevent possible cracks and that asphalting done in chilly weather will be of inferior quality. It is therefore better to await the sunny days to go back before starting work.

A definite contract with your builder in College

To avoid unpleasant surprises, choose your contractor and be sure the title and address of his business are written on the contract. The start and end dates of this job, as well as evidence of the builder's liability insurance and also the technical specifics of the job to be completed, should also be included. No contractor should require a down payment before work starts. To avoid the inconvenience that could lead to unforeseen expenses, visit the Tar And Chip PavingCollege website. You will thus have all the resources in hand to successfully finish your asphalt paving project.

Tar And Chip Paving College - Best Alaska in Alaska!

For quality asphalting work , call on Tar And Chip Paving, College professional team. We have over 20 years of expertise in asphalt laying, resurfacing, maintenance and repair. Consult our Company department to find out the regions served.

Snow Removal College | Asphalt College
Home >> alaska/college >> tar and chip paving
Share this...