Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Options for the asphalt surface in Fairbanks, Alaska


Asphalt installed on an unstable surface can quickly lead to problems. There are three main choices for the Simple installation:

  1. Paving Over Existing Driveway: If your existing driveway is in good shape rather than revealing serious fractures or crumbling, hot asphalt mixture can be placed directly within your driveway. One aspect is height: make certain fences, garage floors, and other constructions are not compromised by the higher level of the surface.
  2. Remove old driveway, peg to the floor: The existing driveway is totally removed (or you may not have a driveway yet) and 4 to 6 inches of hot paving stone is put right on the ground.
  3. Remove the old driveway and fasten it into a good surface. This is the preferred method. An aggregated stone flooring partly replaces part of this hot asphalt mix.

The more asphalt you operate, the more leeway you have. For instance, in 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. In general, for thin asphalt applications (about 1.5 cm), you need to wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you ought to speak to your contractor. The hot mix is ​​still practical in this period, but the time is constrained.

How much does an Asphalt cost in Fairbanks?

Take into account the weather vagaries of our climate when choosing the quality of asphalt. The significant temperature variations we experience cause appreciable damage to asphalt perform.

In addition, it will be good to distinguish the contractor if you have a recreational vehicle or a van. He will have to adapt the asphalt mix so as to be more immune to the burden of heavy vehicles.

The Benefits of Asphalt

  • Smooth finish;
  • non-slip
  • Simple to Keep
  • watertightness ensured
  • withstands the rigors of the Quebec climate quite well (provided it's been set up optimally);
  • prevents the growth of moss;

It'll cost you between $ 3 and $11 per square foot; the cost fluctuates based on the characteristic of the asphalt employed and the paving contractor.

For a sustainable Asphalt

The life of an asphalt paver may be up to 20 years, when the very best conditions are satisfied. We're talking about a professional paving contractor, a great quality of asphalt as well as also an optimal asphalt laying technique.


The longevity of residential asphalt paving largely depends on the standard of the laying. Really, the major causes of deformation or ripping of an asphalt coating are the absence of compaction and a thin foundation. However, the upkeep of the asphalt sidewalk is also a determining factor in its own longevity. That's to say, you'll have to seal your drive once in 10 decades, at a minimum, in order to maintain its great state.


We suggest that you notify your asphalting contractor if you choose to have your driveway asphalt so as to sell your property. It may not be essential to pay top dollar for placing asphalt , in this case.

Asphalt laying: cost and contract

The choice of the asphalt laying builder is essential. In order not to have unpleasant surprises, then you'll need to choose it carefully.

Make sure the paving contractor has liability insurance coverage. A trip to the website of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has been the subject of complaints.

The following details must be included in the arrangement:

- date of beginning and finish of the work;

- evidence of insurance;

- technical details;

- RBQ certification number.

You should be aware that a paving builder cannot require that you make a down payment before work has started. But you should agree to the payment terms and be sure it's about the contract.

A solid base for Asphalt- Fairbanks

Prior to estimating the asphalt driveway to your new residence by a builder, or obtaining some basic knowledge is imperative to make sure the job is done. Know first that the absence of compaction and the inadequate thickness of the foundation are the two chief sources for the deformation or tearing of a layer of asphalt. If it is a new driveway, it has to first be excavated to make room for a coating of crushed stone of sufficient thickness. A geotextile membrane is going to be set under the granular backfill if the soil turns out to be somewhat loamy (clayey). If you own a new house, it's ideal to wait 6 to 12 months prior to paving your drive, to enable the soil to settle . In the event of a repair of the entrance, an easy replacement of the asphalt layer can be considered if the contractor believes that the present foundation is adequate. In both scenarios, base redone or base maintained, the duration of its guarantee must be the same.

Asphalt Fairbanks Alaska

The weather conditions in our lovely state may have a devastating effect on an asphalt drive, hence the significance of including a slope having a minimum slope of 2%. This will allow water to drain into the street and decrease the risk of heaving or cracking. This significant detail has to be taken into account when excavating and maintained during backfilling.

In case you have a van or recreational vehicle, notify the builder prior to the onset of the work: he is going to have the ability to provide materials accordingly. Some asphalt mixtures produce an asphalt that is more resistant to heavy-duty vehicles.

The asphalt layer should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 in) in order to accomplish a thickness of 5 cm (2 ) after being compacted. For optimal stability, the base should extend over the surface to be paved by about thirty centimeters (a couple inches) on each side. Also note that the setup of unwanted supports around the base is a fantastic way to avoid potential cracks and that asphalting done in cold weather will be of inferior quality. It is therefore better to await the sunny days to return before starting work.

A Asphalt contract with your builder in Fairbanks

To avoid unpleasant surprises, then choose your contractor and be certain that the title and address of his company are written on the contract. The start and finish dates of this job, in addition to evidence of this builder's liability insurance and also the technical specifics of the project to be completed, should also be included. No contractor should require a down payment before work starts. To prevent the inconvenience that could lead to unforeseen costs, visit the AsphaltFairbanks site. You will thus have all the tools in hand to successfully finish your asphalt paving project.

Asphalt Fairbanks - Greatest Alaska in Alaska!

For quality asphalting perform , call on Asphalt, Fairbanks specialist team. Confirm our Business section to find out the regions served.

Tar And Chip Paving Fairbanks | Parking Lot Repair And Striping Fairbanks
Home >> alaska/fairbanks >> asphalt
Share this...