Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Asphalt- Alternatives for the asphalt Coating in Juneau, Alaska


Asphalt installed in an unstable surface could quickly lead to difficulties. There are three main choices for the basic installation:

  1. Paving Over Existing Driveway: If your current driveway is in good condition rather than revealing serious fractures or crumbling, hot asphalt mixture can be placed directly within your driveway. 1 facet is height: make sure fences, garage floors, and other constructions are not compromised by the greater level of the new surface.
  2. Eliminate old driveway, peg to the floor: The present driveway is completely removed (or you might not have a driveway nonetheless ) and 4 to 6 inches of warm paving stone is placed directly on the ground.
  3. Eliminate the old driveway and fasten it into a good surface. This is the preferred method. An aggregated stone floor partially replaces part of this hot asphalt mixture.

The more asphalt you work, the more leeway you have. By way of instance, at 40 F, the crews just have 16 minutes to operate on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. Generally, for thin asphalt applications (about 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, then you'll need to speak to your contractor. The hot mix remains functional during this period, but the time is constrained.

How much can an Asphalt price in Juneau?

Consider the weather vagaries of our climate when choosing the quality of asphalt. The substantial temperature variations that we experience cause appreciable damage to asphalt work.

In addition, it'll be useful to distinguish the contractor if you own a recreational vehicle or even a van. He might need to accommodate the asphalt mixture in order to be more resistant to the weight of heavy vehicles.

The Benefits of Asphalt

  • Smooth end;
  • non-slip
  • easy to maintain
  • watertightness ensured
  • withstands the rigors of this Quebec climate quite well (provided it's been installed );
  • prevents the growth of moss;

It will cost you between $ 3 and $11 per square foot; the price fluctuates based on the characteristic of the asphalt used and the paving contractor.

To get a sustainable Asphalt

The life of an asphalt paver may be around 20 decades, when the best states are met. We're talking about a professional paving contractor, a great grade of asphalt and also an optimal asphalt laying technique.


The durability of residential asphalt paving chiefly is dependent upon the standard of the laying. Indeed, the major causes of deformation or tearing of an asphalt layer are the absence of compaction and a thin foundation. On the other hand, the upkeep of the asphalt pavement is also a deciding factor in its own longevity. That's to say, you'll have to seal your driveway once in 10 decades, at a minimum, in order to maintain its good state.


We suggest that you notify your asphalting contractor if you decide to get your driveway asphalt in order to offer your property. It may not be necessary to pay top dollar for laying asphalt , in this case.

Asphalt laying: cost and contract

The option of the asphalt laying builder is indispensable. In order not to have unpleasant surprises, you'll have to select it carefully.

Our guarantees and Asphalt work

Make sure the paving contractor has liability insurance coverage. A visit to the web site of the Office for Consumer Protection (OPC) will make it possible for you to verify whether an entrepreneur has become the subject of complaints.

The following details should be included in the arrangement:

- date of start and finish of the work;

- evidence of insurance;

- technical details;

- RBQ accreditation number.

You ought to be aware that a paving builder can't demand you to make a down payment before work has started. However, you need to agree to the payment terms and make sure it's about the contract.

Prior to estimating the asphalt driveway to your new home by a builder, or acquiring some basic knowledge is imperative to make sure the job is done. Know first that the absence of compaction and the inadequate depth of the base are the two main sources for the deformation or ripping of a coating of asphalt. When it's a new driveway, it has to initially be excavated to make room for a layer of crushed stone of sufficient depth. A geotextile membrane will be set beneath the granular backfill if the soil turns out to be very loamy (clayey). If you own a new house, it is best to wait 6 to 12 months before paving your drive, to enable the soil to settle naturally. In the event of a repair of the entrance, a simple replacement of the asphalt layer can be considered in the event the contractor considers that the present foundation is sufficient. In both scenarios, foundation redone or base preserved, the whole period of its warranty has to be the same.

Asphalt Juneau Alaska

The weather conditions in our beautiful province can have a devastating effect in an asphalt driveway, thus the importance of adding a slope with a minimum slope of 2%. This will allow water to drain to the street and minimize the risk of heaving or cracking. This important detail has to be taken into consideration when excavating and preserved during backfilling.

In case you have a van or recreational vehicle, notify the contractor prior to the onset of the job: he will be able to supply materials so. Some asphalt mixtures produce an asphalt which is more resistant to heavy-duty vehicles.

The asphalt coating should have an initial thickness of 6.35 to 7.6 cm (2.5 to 3 ) in order to accomplish a thickness of 5 cm (2 ) after being compacted. For optimum stability, the foundation should extend over the surface to be paved by roughly thirty centimeters (a couple inches) on each side. Also note that the setup of unwanted supports around the foundation is a fantastic method to prevent potential cracks and that asphalting done in cold weather will be of inferior quality. It is therefore far better to await the sunny days to go back before starting work.

A Asphalt contract with your builder in Juneau

To avoid unpleasant surprises, then select your contractor diligently and be certain the name and address of the company are composed on the contract. The beginning and end dates of the work, in addition to proof of this builder's liability insurance and the technical specifics of the job to be completed, should also be included. No contractor should need a deposit before work starts. To prevent the inconvenience that might lead to unforeseen expenses, visit the AsphaltJuneau site. You will thus have the resources in hand to successfully complete your asphalt paving project.

Asphalt Juneau - Best Alaska at Alaska!

For caliber asphalting perform , phone on Asphalt, Juneau professional team. Confirm our Business section to figure out the regions served.

Tar And Chip Paving Juneau | Parking Lot Repair And Striping Juneau
Home >> alaska/juneau >> asphalt
Share this...