Easy and Trusted Asphalt

Call Us Today: 1240.226.2848

Concrete Maintenance- Alternatives for the asphalt surface in Juneau, Alaska


Concrete Maintenance installed on an unstable surface could quickly lead to difficulties. There are 3 main choices for the Simple installation:

  1. Paving Over Existing Driveway: If your current driveway is in good shape rather than revealing severe cracks or crumbling, hot asphalt mix can be placed directly within your driveway. One aspect is height: make certain fences, garage flooring, and other structures are not compromised by the greater level of the surface.
  2. Remove old driveway, peg to the floor: The present driveway is completely eliminated (or you might not have a driveway yet) and 4 to 6 inches of warm paving stone is placed right on the ground.
  3. Remove the old driveway and secure it to a good surface. This is actually the preferred method. An aggregated stone flooring partially replaces part of this hot asphalt mixture.

The longer asphalt you work, the more leeway you might have. By way of instance, in 40 F, the crews only have 16 minutes to work on 1 1/2 inch thick asphalt. As the asphalt thickness increases by 3 inches, the workability time also raises: 46 minutes. In general, for thin asphalt programs (approximately 1.5 cm), you should wait until temperatures are 21 ° C or higher. Between 50 and 60 F, you ought to speak to your contractor. The hot mix remains functional in this period of time, however, the time is constrained.

How much does an Concrete Maintenance cost in Juneau?

Consider the weather vagaries of the climate when choosing the quality of asphalt. The substantial temperature variations that we experience cause considerable damage to asphalt perform.

In addition, it will be useful to tell the contractor if you have a recreational vehicle or even a van. He might need to adapt the asphalt mix so as to be more resistant to the burden of heavy vehicles.

The Benefits of Concrete Maintenance

A driveway paved with asphalt has several advantages:

It will cost you between $ 3 and $11 per square foot; the cost varies depending on the characteristic of the asphalt used along with the paving contractor.

To get a sustainable Concrete Maintenance

The existence of an asphalt paver can be up to 20 years, when the very best conditions are met. We're referring to a professional paving builder, a great grade of asphalt as well as an optimal asphalt laying technique.

Concrete Maintenance in Juneau: price, quality of work and lifespan


The longevity of residential asphalt paving largely depends on the quality of the laying. Really, the significant causes of deformation or tearing of an asphalt coating are the absence of compaction and a lean base. However, the maintenance of the asphalt sidewalk can be a deciding factor in its own longevity. That is to say, you'll have to seal your drive once in 10 years, at a minimum, so as to maintain its good state.


We suggest that you inform your asphalting contractor in case you choose to get your driveway asphalt so as to offer your property. It might not be essential to pay top dollar for laying asphalt , in such a circumstance.

Concrete Maintenance placing: cost and contract

The option of the asphalt laying builder is essential. In order not to have unpleasant surprises, then you will need to choose it carefully.

Our ensures and Concrete Maintenance work

Guarantee that the paving contractor has liability insurance coverage. A trip to the web site of the Office for Consumer Protection (OPC) will make it possible for you to confirm whether an entrepreneur has ever become the subject of complaints.

These details should be included in the arrangement:

- date of beginning and finish of the job;

- evidence of insurance;

- technical details;

- RBQ accreditation number.

You ought to know that a Concrete Maintenance builder can't demand you to make a deposit before work has begun. However, you should agree to the payment terms and make sure it is on the contract.

Before redoing the Concrete Maintenance drive to your new home by a builder, or obtaining some fundamental knowledge is vital to guarantee that the job is well done. Know first that the absence of compaction and the inadequate thickness of the base are the two chief sources for the deformation or tearing of a coating of asphalt. If it's a new driveway, it must initially be excavated to make room for a coating of crushed stone of adequate depth. A geotextile membrane will be set beneath the granular backfill if the dirt turns out to be very loamy (clayey). If you have a new house, it is ideal to wait for 6 to 12 months prior to paving your drive, to allow the dirt to settle . In the case of a repair of this entry, an easy replacement of the Concrete Maintenance coating can be considered if the contractor considers that the existing base is sufficient. In both scenarios, base redone or foundation preserved, the whole period of its guarantee has to be the same.

Concrete Maintenance Juneau Alaska

The weather conditions in our lovely state may have a disastrous impact on an asphalt driveway, thus the significance of adding a slope with a minimum slope of 2%. This will enable water to drain to the street and decrease the risk of heaving or cracking. This significant detail must be taken into account when excavating and preserved during backfilling.

If you've got a van or recreational vehicle, notify the builder prior to the onset of the work: he will have the ability to supply materials accordingly. Some asphalt mixtures produce an asphalt that is more resistant to heavy duty vehicles.

The asphalt coating should have a first thickness of 6.35 to 7.6 cm (2.5 to 3 ) so as to reach a thickness of 5 cm (2 in) after being compacted. For optimal stability, the base should extend across the surface to be paved by about thirty centimeters (a dozen inches) on each side. Also note that the installation of side supports around the base is a fantastic way to avoid possible cracks and that Concrete Maintenance done in cold weather is going to be of poor quality. It's therefore better to wait for the bright days to return before beginning work.

To avoid unpleasant surprises, select your contractor and be sure that the name and address of the business are composed about the contract. The start and finish dates of this job, as well as proof of the contractor's liability insurance and also the technical specifics of this job to be completed, should also be included. No contractor should need a deposit before work starts. To avoid the inconvenience that could cause unforeseen expenses, visit the Concrete MaintenanceJuneau site. You will thus have the resources in hand to successfully finish your Concrete Maintenance project.

Concrete Maintenance Juneau - Greatest Alaska at Alaska!

For quality asphalting work , phone on Concrete Maintenance, Juneau professional team. Confirm our Business section to find out the regions served.

Parking Lot Repair And Striping Juneau | Snow Removal Juneau
Home >> alaska/juneau >> concrete maintenance
Share this...